Dimensions Guide

DEPTH
WITHOUT
DOOR
26
1
/
2
"
DEPTH
TO DOOR
30
1
/
8
"
WIDTH
(FITS 36" OPENING)
32
1
/
8
"
HEIGHT
WITH
HINGE
70"
Be sure your new fridge will fit
Don't wait until delivery to be sure your new refrigerator will t – both
in your kitchen and through all doorways. This guide includes all pertinent
measurements and clearances so you can buy with condence.
19.5 cu. ft. French Door
MODEL RF20A5101 DIMENSIONS
Installation clearances
3Allow 3 ¾" of clearance when installing along a wall.
This will allow for the door to open 90 degrees without
the handle contacting the wall.
3Allow 2" minimum clearance at rear for proper
air circulation and water/electrical connections.
3Allow a ⅜" minimum clearance at sides and top
for ease of installation.
For optimal usage and ability to open refrigerator doors
completely, do not install next to a wall.
Please note: The above dimension and cutout information is for planning
purposes only. For complete installation details, consult manual packed
with product or download manual online at samsung.com.
Measure height
including flooring.
Be sure to allow for
hinge clearance
height if needed.
Measure width
including countertop
overhang.
Measure depth
including molding
or trim.
Walk the delivery route
3 Identify the narrowest opening that the appliance will travel through, from outside the home to the location where it will be installed.
3Appliance depth or width must be smaller than the width of the narrowest opening.
TOP OF REFRIGERATOR WITH DRAWER OPEN
54
7
/
8
"
135° 135°
TOP OF REFRIGERATOR WITH DOORS OPEN 135°
DEPTH
WITH D00R
OPEN 90°
43
1
/
2
"
HEIGHT
WITHOUT
HINGE
68
7
/
8
"
DEPTH WITH
DRAWER
OPEN
44
1
/
2
"
11
1
/
2
"
Standard Depth Refrigerator
Standard depth refrigerators typically measure 30 to 35 inches in depth,
as opposed to counter depth refrigerators that sit ush with cabinetry.