User Manual

English 37
Operations
Turning on or off the Peak Demand function
You can turn on or off the Peak Demand function. For more information on the Peak
Demand function, see the SMART GRID Function (Demand Response) (applicable models
only) section.
1. Tap any button ( , , or ) to wake up the display.
- This step may not apply to some models.
2. Tap until the Peak Demand indicator blinks.
3. Tap or to turn on or off the function.
- Tap to turn it on.
- Tap to turn it off.
4. Wait for 5 seconds or tap to conrm your selection.
- The Peak Demand indicator stops blinking.
Activating or deactivating the Sabbath mode (applicable models
only)
The Sabbath mode stays active for 85 hours once it is activated. After that, it will be
deactivated automatically.
• To activate or deactivate the Sabbath Mode, tap and hold and simultaneously for 6
seconds. Then, when the display blinks, tap .
- When the refrigerator is in the Sabbath mode, the buttons, display, and internal
lights do not function. The refrigerator and freezer, however, continue to cool.
NOTE
• If the refrigerator powers off and restarts (for example, if there is a power failure),
the Sabbath mode remains active. To end Sabbath Mode, you must deactivate it as
instructed above.
Activating or deactivating the Cooling Off mode
The Cooling Off mode (also called the Shop mode) is designed for retailers to display
refrigerators on a retail oor. In the Cooling Off mode, the refrigerator’s fan motor and
lights operate normally, but the compressors do not run, so neither the refrigerator nor the
freezer becomes cold.
• To activate or deactivate the Cooling Off mode, tap and hold and simultaneously
for 6 seconds. Then, when the display blinks, press .
- When the Cooling Off mode is on, the refrigerator chime sounds, and the refrigerator
shows “0” on the fridge indicator and “FF” on the freezer indicator.
Untitled-1 37 2021-03-09  10:32:22