User/Service Guide

English 19
Installation
Step-by-step installation
STEP 1 Select a site
Select a site that:
• Has a solid, level surface without carpeting or ooring that may obstruct ventilation
• Is away from direct sunlight
• Has adequate room for opening and closing the door
• Is away from any heat sources
• Provides room for maintenance and servicing
• Has a temperature range between 50 °F (10 °C) and 109 °F (43 °C)
CAUTION
• If your refrigerator is equipped with an ice maker, provide extra space at the rear of
the refrigerator for the water line connection.
• When you install the refrigerator next to a xed wall, you must provide a minimum
clearance of 3
3
/4" (95 mm) from the wall to allow the door to swing open.
• Use of an electrical outlet with a ground fault interrupter (GFI) is not recommended.
NOTE
To facilitate moving your refrigerator to its nal location, be sure to measure the width
and height of doorways, thresholds, ceilings, stairways, and anything else that needs to be
taken into consideration to ensure you can move your refrigerator safely. The following
diagram illustrates the exact height and depth (factory specications) of your refrigerator.
Clearance
See the pictures and table below for space requirements for installation.
C
D
E
B
A
Model RF22R*
Depth “A” 28
4
/8" (724 mm)
Width “B” 35
3
/4" (908 mm)
Height “C” 68
7
/8" (1749 mm)
Overall Height “D” 70" (1777 mm)
Depth “E” 31" (788 mm)
Untitled-4 19 2019-05-14  11:49:29