User/Service Guide

English 45
Operations
Door Alarm
The door alarm sounds if you leave the door open. Tap and
drag the button to turn on or off.
Temp. Unit
Switch the temperature scale between Celsius and Fahrenheit.
Touch °F or °C to change the scale.
Water Filter
(applicable models only)
Provides a water lter replacement tutorial and lets you reset
the water lter replacement indicator. Tap to open.
NOTE
• After installing the water lter, tap Water Filter, and then
tap Reset. Tapping Reset re-initializes the function that
measures the time remaining until the water lter needs to
be replaced again.
• If you tap Buy Filter, you will be directed to the website
where you can purchase a water lter.
Self Check
Self Check is a self diagnoses function. Tap to open. Tap Start
to run.
Energy Saver
Tap and drag this button to turn Energy Saver mode on and
off.
The Energy Saver function automatically turns off when
power is supplied to the refrigerator. The settings for Energy
Saver may differ with the model. If condensation or water
drops appear on the doors, turn the Energy Saver mode off.
Demand Response
(applicable models only)
Works with the Smart Grid energy saving manager. Tap to
open. Tap and drag the button to turn on or off. See the Smart
Grid section in this manual for more information.
Cooling Off
Cooling Off mode (also called Shop mode), is designed for use
by retailers when they are displaying refrigerators on the
shop oor.
In Cooling Off mode, the refrigerator’s fan motor and lights
work normally, but the compressors do not run, and the
refrigerator and freezer do not get cold. If Cooling Off is
turned on, all cooling controls will turn to OFF on the Fridge
Manager.
• To activate Cooling Off, tap Activate > Proceed from
Cancel/Proceed.
• To deactivate Cooling Off, tap Deactivate > Proceed from
Cancel/Proceed.
Untitled-4 45 2019-05-14  11:49:40