User/Service Guide
English66 
Maintenance
Handling and care
Ice bucket (applicable models only)
If you do not dispense ice for an extended period, ice may form clumps inside the bucket. 
If this happens, remove and empty the ice bucket.
1.  To remove the ice bucket, gently lift 
it up, and then pull it out slowly while 
holding the bottom of the bucket with 
one hand and the side with the other 
hand.
2.  Empty the bucket.
3.  When done, put the bucket back into 
position. If the bucket does not t in, 
turn the helix screw 90 degrees, and 
then try again.
A
If the ice bucket is not rmly inserted, 
turn the Helix (A) 90 degrees, and then try 
again.
CAUTION
•  Do not apply excessive force to the bucket cover. The cover may break.
•  Do not forcefully close the door. Water may spill over the ice maker.
•  To prevent injury, make sure to clean up any ice or water that has fallen on the oor.
•  To prevent accidents or injury, do not let children play with the water dispenser or the 
ice maker.
Maintenance
Untitled-4 66 2019-05-14  11:49:44










