Refrigerator User manual Free Standing Appliance Untitled-7 1 2018-08-27 4:40:54
Contents Safety information 4 Contents Important safety symbols and precautions: State of California Proposition 65 Warning (US only) Severe warning signs for transportation and site Critical installation warnings Installation cautions Critical usage warnings Usage cautions Cleaning cautions Critical disposal warnings This appliance is intended to be used in household and similar applications such as 5 5 5 6 8 8 12 13 14 14 Installation 15 Refrigerator at a glance Step-by-step installation 15 17 Op
75 General Do you hear abnormal sounds from the refrigerator? SmartThings Samsung Family Hub Smart Grid LCD 75 79 81 82 83 84 LIMITED WARRANTY (U.S.A.
Safety information • • • Safety information • • Before using your new Samsung Refrigerator, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers safely and efficiently.
Important safety symbols and precautions: Please follow all safety instructions in this manual. This manual uses the following safety symbols. WARNING Hazards or unsafe practices that may result in severe personal injury, property damage, and/or death. Safety information CAUTION Hazards or unsafe practices that may result in severe personal injury and/or property damage. NOTE Useful information that helps users understand or benefit from the refrigerator.
Safety information Critical installation warnings WARNING • • Safety information • • • • • • • • • • • • • • Do not install the refrigerator in a damp location or place where it may come in contact with water. - Deteriorated insulation on electrical parts may cause an electric shock or fire. Do not place this refrigerator in direct sunlight or expose it to the heat from stoves, room heaters, or other appliances. Do not plug several appliances into the same multiple power strip.
• • Make sure that the power plug is not crushed or damaged by the back of the refrigerator. Keep the packing materials out of reach of children. • - There is a risk of death from suffocation if a child puts the packing materials on his or her head. The appliance must be positioned so that the plug is accessible after installation. - Failing to do so may result in an electric shock or fire due to electric leakage.
Safety information • • • Safety information • • • • Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord, or loose wall socket. - This may result in an electric shock or fire. If the power cord is damaged, have it replaced immediately by the manufacturer or one of its service agents. Only a qualified technician or service company should be allowed to change the fuse in the refrigerator. - Failing to do so may result in an electric shock or personal injury.
• • • - This may result in an electric shock or injury. - Any sharp edges may cause a personal injury. Do not touch the inside walls of the freezer or products stored in the freezer with wet hands. - This may cause frostbite. Do not put a container filled with water on the refrigerator. - If spilled, there is a risk of fire or electric shock. Do not keep volatile or flammable objects or substances (benzene, thinner, propane gas, alcohol, ether, LP gas, and other such products) in the refrigerator.
Safety information • Do not overfill the refrigerator with food. • - When you open the door, an item may fall out and cause personal injury or material damage. Do not spray volatile material such as insecticide onto the surface of the appliance. • Safety information • • • • • • • • • • • - As well as being harmful to humans, it may also result in an electric shock, fire, or problems with the product. Never put fingers or any objects into the water dispenser outlet, ice chute, or ice maker bucket.
• • • • • • • • • • • - This can cause a personal injury or material damage. Do not attempt to repair, disassemble, or modify the refrigerator yourself. - Unauthorized modifications can cause safety problems. To reverse an unauthorized modification, we will charge the full cost of parts and labor. Do not use any fuse (such as cooper, steel wire, etc.) other than a standard fuse. If your refrigerator needs to be repaired or reinstalled, contact your nearest Samsung service center.
Safety information Usage cautions CAUTION Safety information • • • Do not re-freeze frozen foods that have thawed completely. Use only the ice maker provided with the refrigerator. To get the best performance from the product: • - Do not place food too close to the vents at the rear of the refrigerator as this can obstruct free air circulation in the refrigerator compartment. - Wrap food up properly or place it in airtight containers before putting it into the refrigerator.
Cleaning cautions CAUTION Do not spray water directly on the inside or outside of the refrigerator. • • - There is a risk of fire or electric shock. Do not use a hair dryer to dry the inside of the refrigerator. Do not place a lighted candle in the refrigerator to remove bad odors. • - This may result in an electric shock or fire. Do not spray cleaning products directly on the display. • - Printed letters on the display may come off.
Safety information Critical disposal warnings WARNING • Safety information • • • • • • DANGER : Risk of child entrapment. Before you throw away your old refrigerator or freezer: - Take off the doors and door latch. - Leave the shelves in place so that children may not easily climb inside. - Children trapped inside a refrigerator can hurt themselves or suffocate to death. Please dispose of the packaging material from this product in an environmentally friendly manner.
Installation Follow these instructions carefully to ensure a proper installation of this refrigerator and to prevent accidents before using it. WARNING • • • • Use the refrigerator only for its intended purpose as described in this manual. Any servicing must be performed by a qualified technician. Dispose of the product packaging material in compliance with the local regulations. To prevent electric shock, unplug the power plug before servicing or replacing parts.
Installation 01 Auto Ice Maker 02 1-Step Foldable Shelf 03 Water tank (Auto Water Fill) 04 FlexZone™ 05 Freezer 06 Door bins 07 2-Step Foldable Shelf 08 Water filter * applicable models only NOTE • • • Installation • • • • For energy efficiency, keep all shelves, drawers, and baskets in their original positions. When closing the door, make sure the vertical hinged section is in the correct position to avoid scratching the other door.
Step-by-step installation STEP 1 Select a site Select a site that: • • • • • • Has a solid, level surface without carpeting or flooring that may obstruct ventilation Is away from direct sunlight Has adequate room for opening and closing the door Is away from any heat sources Provides room for maintenance and servicing Has a temperature range between 50 °F (10 °C) and 109 °F (43 °C) CAUTION • Installation • If your refrigerator is equipped with an ice maker, secure extra space at the rear of the refrige
Installation Model 01 01 04 02 02 03 02 04 03 05 Installation 06 08 09 10 11 07 08 09 2" (50 mm) (50 mm) 135° 135° 62” 64” (1575 mm) (1624 mm) 13 /4" 14 1/8" (333.5 mm) (358 mm) 35 /4" 35 3/4" (908 mm) (908 mm) 24" 24" (610 mm) (610 mm) 1 2 /2" 2 1/2" (64 mm) (64 mm) - 11 4 1/8" (104 mm) 3 1 /4" 1 3/4" (45.4 mm) (45.4 mm) 43 /8" 43 1/8" (1095.5 mm) (1095.
STEP 2 Flooring If the refrigerator cannot pass through the entrance due to its size, see STEP 3 Door removal for entrance. NOTE Installation To prevent floor damage, make sure the front levelling legs are in the upright position. • The surface you install the refrigerator must support a fully loaded refrigerator. • To protect the floor, put a large piece of cardboard along the path to the refrigerator's final installation location.
Installation STEP 3 Door removal for entrance If the refrigerator cannot pass through the entrance to your home or kitchen due to its size, follow these instructions to remove and then re-install the refrigerator's doors. If you do not need to remove the doors, go to page 27 to continue the installation procedure. WARNING Unplug the power cord of the refrigerator before removing the doors.
Detach the fridge doors 1. With the door opened, remove the screws from the top cover. Installation 2. Disconnect the wires and the water tube from the left-side door. Do the following sequentially: • Decouple the connector. • While holding down one end of the water line coupler, disconnect the water tube. CAUTION Keep the water tube clips out of children’s reach. 3. • • • Remove the top hinges. Pull and remove the hinge lever. Then, remove the door hinge. Repeat this step on the other side.
Installation 4. Lift straight up to remove the door. • Repeat this step on the other side. CAUTION Do not remove both doors simultaneously. Make sure to remove one door at a time. Otherwise, any of the doors may fall and cause physical injury. Installation 5. Remove the middle hinge. • Remove the screw from the hinge using a Phillips screwdriver. • Remove 2 hex-head bolts from the hinge using an Allen wrench (1/4", 5 mm). • Remove the middle hinge. • Repeat this step on the other side.
Detach the FlexZone™ drawer 1. Lift up to remove the FlexZone™ basket. 2. Remove the wire cover with harness using a flat-head screwdriver. Installation 3. Press the locking tab to disconnect the wire connector. 4. Remove the hex-head bolt from each side using a socket wrench (3/8", 10 mm) or a screwdriver.
Installation 5. Lift up to remove the drawer front of the FlexZone™ from the rail assembly. CAUTION • • Installation • Use caution when removing the rail assembly, which may fall off causing damage to the floor. Make sure to put the FlexZone™ drawer in place after removing or mounting the FlexZone™ basket. The FlexZone™ drawer may not open or close if the freezer drawer is not in place. Do not store too much food in the FlexZone™ drawer.
Detach the freezer drawer 1. Push the upper basket to the end, and then pull up to remove. 2. Pull up to remove the lower basket from the rail assembly. Installation 3. Press down the hooks to unlock the rail assembly. 4. While holding the upper area of the drawer front of the freezer, slide out all the way to remove the freezer drawer from the rail assembly.
Installation CAUTION • • • Installation • • Make sure you mount the freezer baskets in the right position. Otherwise, the drawer will not open or close properly, which causes frost to build up. Do not store too much food in the freezer baskets. This prevents the freezer drawer from closing properly, resulting in frost buildup. While the lower basket is fully open, put the upper basket into the freezer drawer. Make sure the wheels of the upper basket are on the end of the rails of the lower basket.
STEP 4 Levelling the refrigerator CAUTION • • • • The refrigerator must be levelled on a flat, solid floor. Failing to do so can cause damage to the refrigerator or physical injury. Levelling must be performed with the refrigerator empty. Make sure no food items are inside the refrigerator. Also, open the freezer drawer and remove the lower basket. For safety reasons, adjust the refrigerator so that the front is a little higher than the rear.
Installation STEP 5 Adjust the door height and the door gap Snap rings The height of a door can be adjusted using the provided snap rings, which come in 4 different sizes (1 mm, 1.5 mm, 2 mm, and 2.5 mm). To adjust the height of a door 1. Check the height difference between the doors, and then raise and hold the door with the lower height. Installation 2. Insert a suitable-sized snap ring (A) between the door and the hinge as shown. A CAUTION • • • Insert only one snap ring.
STEP 6 Connect the water dispenser line A water dispenser with a filter is one of the helpful features on your new refrigerator. To help promote better health, the water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that. The water line also connects to the ice maker. For the ice maker to operate properly, water pressure of 20-125 psi is required.
Installation Connect the water supply line to the refrigerator There are several items you must purchase to complete this connection. You may find these items sold as a kit at your local hardware store. 1 Copper Tubing • • • /4" copper tubing /4" compression nut (1 pc) Ferrule (2 pc) Plastic Tubing • • 1 1 /4" plastic tubing Molded end (Bulb) /4" compression nut (1 pc) 1 A. Refrigerator B. Household water supply line C C. Water Line: must be kept straight.
CAUTION • • If you use plastic tubing (A), do not use it without the molded end (Bulb). Leaving the water line disconnected may cause the water valve to produce a buzzing sound over time. If this is the case, make sure that the ice making function is turned “OFF” and do not attempt to use the water dispenser. 2. Tighten the compression nut (B) onto the compression fitting. Do not over-tighten the compression nut (B). 3. Turn the water on and check for any leakage.
Installation STEP 7 Initial settings By completing the following steps, the refrigerator should be fully functioning. CAUTION 1 Before installing the refrigerator, make sure to remove the Cover Interlock (1) from the top of the fridge door. Otherwise, injuries may be caused by the ice crushing blade. 1. Plug the power cord into the wall socket to turn the refrigerator on. 2. Open the door, and check if the interior light lights up. Installation 3.
Operations User interface NOTE • • • • For detailed information about the refrigerator's functions, and apps, see the on-screen user manual available on the LCD display of your refrigerator. The content of apps and widgets, or their design is subject to change. Support for apps and widgets may be discontinued without notice, depending on the content provider’s policy. Underage transactions with the services must be supervised by adults. The PANDORA apps are only available in the United States.
Operations 01 Home screen 02 01 01 Apps & Widgets • Tap a desired app or widget to launch it. • Tap and hold an app or widget to enter Edit mode. A grid appears. In Edit mode, you can drag and drop an app or widget to a new position on the grid. When you move the app or widget to a new grid location, the location turns blue if it is available. If it is not available, it turns red. • You can add an app or widget that has been removed from the Apps list.
Notification ( ) Indicates there is a notification message. Cloud sync ( ) Indicates Family Hub is receiving data from the cloud server. 02 Task bar 01 02 03 04 05 01 Microphone 02 Menu Tap to turn on or off the voice recognition function. The microphone icon turns red when it is turned off. Tap to display the menus available. • • 03 Home 04 Return Tap to return to the previous screen. 05 Notification Tap to display the Quick Panel. Operations Tap to open the Home screen.
Operations Fridge Manager To access Fridge Manager, swipe the Home screen to the left, and then tap the Fridge Manager widget. • • • • • Tap < or > on the bottom of the widget to move between pages. On the first page, you can check the current temperatures or modes of each compartment as well as active special functions. Tap the first page to open the Fridge Manager for detailed settings. On the second page, you can check the filter status.
04 05 The Fridge Manager is a graphical representation of your refrigerator. The top half represents the refrigerator compartment, the bottom left the freezer compartment, and the bottom right the FlexZone. The temperature or mode settings for each are displayed over each section. 06 01 Fridge Manager At a Glance 01 Temperature Change the set temperature in the fridge, freezer, and FlexZone.
Operations NOTE The displayed conditions may differ from the actual temperature and humidity. 5. Auto Water Fill Status Displays the status of the Auto Water Fill function. 6. Ice Maker Status Displays the operation status of the Ice Maker. NOTE • • Also displayed is the Ice Maker off (ice making off) indicator at the top, center. When the indicator displays Ice Maker off, the refrigerator's ice maker is turned off.
Provides a water filter replacement tutorial and lets you reset the water filter replacement indicator. Tap to open. NOTE Water Filter • • Self Check Energy Saver After installing the water filter, tap Water Filter, and then tap Reset. Tapping Reset re-initializes the function that measures the time remaining until the water filter needs to be replaced again. If you tap Buy Filter, you will be directed to the website where you can purchase a water filter. Self Check is a self diagnoses function.
Operations Settings • You can set the screen brightness, wallpapers, auto wake-up, motion detector, theme, screen timeout, and duration of the screen saver. • Set the volume and equalizer and turn on or turn off the touch sound. • Turn on or turn off a Wi-Fi connection. The current Wi-Fi network is listed first in the access point (AP) list. • When the Speaker mode is on, you can listen to music and media on your mobile phone or tablet through Family Hub’s speaker.
Easy Connection Clean Screen Mode Accessibility Online Manual • Easy Connection can be used with Samsung Smartphone apps, and allows you to connect your device to the same home Wi-Fi network that your smartphone is connected to. • Turn on so you can clean the screen without activating any apps. • Set to turn on or off the screen reader function for blind and lowvision users. • The online manual will walk you through various menus and apps that the refrigerator provides directly on the display.
Operations Display reset (applicable models only) If the display is not working correctly, try resetting the display. This may resolve the problem. 1. Open the right-side fridge door and locate the switch cover on the top right corner of the door. 2. Push up the cover to reveal the power switch. 3. Turn the switch off, and then turn it on again. 4. Reinsert the switch cover to the end until you hear a clicking sound.
SmartThings Installation Visit the Google Play Store, Galaxy Apps, or Apple App Store and search for “SmartThings”. Download and install the SmartThings app provided by Samsung Electronics to your smart device. NOTE • • • • • • • • Operations • The SmartThings app is designed for Android 6.0 (Marshmallow) or later, iOS 10.0 or later, iPhone 6 or later, and is optimized for Samsung smartphones (Galaxy S and Galaxy Note series).
Operations Samsung account You are required to register your Samsung account to use the app. If you don’t have a Samsung account, follow the app’s onscreen instructions to create a free Samsung account. Getting started Turn on the device you want to connect, open the SmartThings app on your phone, and then follow the instructions below. If a pop-up appears saying that a new device has been found, tap ADD NOW.
Category Monitoring Item Description Fridge temperature Displays the current temperature setting of the fridge. Freezer temperature Displays the current temperature setting of the freezer. FlexZone™ settings Displays the settings of the FlexZone™. Diagnosis Detects abnormal operations of the refrigerator. Energy monitoring Checks the accumulated power consumption of the refrigerator for the last 180 days.
Operations SMART GRID Function (Demand Response) When the refrigerator operates in SMART GRID (Demand Response) mode, the Energy Management Refrigerator function can control energy usage or delay the operation of some functions to save money when energy prices or demand are the highest. NOTE • • You can deactivate the SMART GRID (Demand Response) function at any time using the Override On/Off function.
• Temporary Appliance Load Reduction (L4): The refrigerator responds to a TALR signal by aggressively reducing the load for a short time period. This function reduces energy consumption by stopping the compressor and controlling the functions that consume a lot of energy such as the defrost cycle and making ice. - TALR (L4) mode is automatically deactivated after it lasts for the received duration (max. 15 minutes), or when the Override function is turned on.
Operations Using the Energy Management Function The Energy Management function enables you to control and monitor your Energy Management refrigerator using the SmartThings app for your convenience. NOTE • To use the Energy Management refrigerator functions, you have to install the corresponding app first. 1. Operational Status - You can check the DR and Override status. 2. Energy Consumption Reporting - Shows the accumulated power consumption. Power consumption data is updated every 5 minutes.
Provision for Open Access to the Connected Product Requirements 1. SGIP Open Standards (Smart Energy Profile 2.0 - http://www.csep.org/) - Energy Consumption Reporting - Demand Response 2.
Operations Recommendations for voice recognition For the voice recognition function, there is a built-in microphone at the top of the refrigerator’s display. To use the voice recognition function: • • Stand no more than 3 feet (1 meter) from the refrigerator and speak loudly and clearly towards the built-in microphone. Speak at a regular pace. Reduce ambient noises, such as noises from a living-room TV.
Samsung account You are required to register your Samsung account to use the app. If you don’t have a Samsung account, follow the app’s onscreen instructions to create a free Samsung account. NOTE To connect your smartphone and the refrigerator, register your Samsung account in Settings Profiles. Item Description Calendar You can share your schedule with your family. To Do You can create and edit a to-do list to your needs. Memo You can create and edit a memo to specific users.
Operations Dispenser panel 04 01 02 03 01 Water / Lock 02 Cubed Ice 03 Crushed Ice / Lighting 04 Dispenser mood light 01 Water / Lock (3 sec) Operations Water To dispense chilled water, press Water. The corresponding indicator turns on. Lock To prevent use of the dispenser panel buttons and the dispenser lever, press and hold Water for more than 3 seconds.
03 Crushed Ice / Lighting (3 sec) Crushed Ice Press Crushed Ice to dispense crushed ice. The corresponding indicator turns on. Lighting By default, the dispenser lamp turns on only when the dispenser is used. To keep the dispenser lamp turning on, press and hold Crushed Ice for 3 seconds. To turn the lamp off, press and hold Crushed Ice for 3 seconds again.
Operations Special features Water tank (Auto Water Fill) The Auto Water Fill function lets you enjoy cold brewed tea in your refrigerator. 01 02 01 02 03 04 Lid Sealed mouth Infuser Body 03 04 To fill the water tank 1. Grasp a handle groove of the sealed mouth, and then pull up to open the lid. Operations 2. Put tea leaves or fruits to your taste into the infuser. NOTE If you want to keep the infused water in its initial concentration, turn the Auto Water Fill function off. 3.
5. To drink tea, open the door and detach the water tank. Pull it straight out. CAUTION • • We recommend consuming fruit infused water within 24 hours. After that, the infused water can spoil over time. You must clean the water tank after you have consumed up the infused water or when a long time has passed without using the water tank. To prevent the water tank from tipping over or leaking, make sure the water tank fits in the water tank holder.
Operations NOTE • • If the front side (specifically marked area) of the water tank has too much moisture, the water tank may not fully fill. Remove the moisture, and then try again. Auto Water Fill will stop supplying water for the water tank if the water tank does not fill after a certain amount of time. If this happens, check if the water line is properly connected. Remove and reinsert the water tank, and then try again.
To dispense water with ice 1. With the Ice Maker enabled, press Cubed Ice or Crushed Ice to select the ice type. 2. Put a water glass under the dispenser, and then push the dispenser lever with the glass. Ice will be dispensed from the dispenser. 3. Press Water to select water. 4. Push the dispenser lever with the glass. Water will be dispensed from the dispenser. NOTE • • Operations • The dispenser will stop dispensing if you keep pushing the dispenser lever for about 1 minute.
Operations Diagnosis If ice does not dispense, first check the ice maker. 1. Press Test on the side of the ice maker. You will hear a chime (ding-dong) when you press the button. 2. You will hear another chime if the ice maker is operating properly. CAUTION • • • • Operations • • If the ice making chime rings repeatedly, contact your waterline installer or a local Samsung service center. Do not press Test repeatedly after the ice tray is filled with ice or water. Water may overflow or ice may jam.
FlexZone™ divider You can change the divider position. To do this, unlock the divider by turning the divider dial counter clockwise. Then, move the width and height bars as appropriate. When done, turn the dial clockwise to lock the divider. NOTE If the divider lock does not function, wipe the bars to remove moisture on them.
Maintenance Handling and care Ice bucket If you do not dispense ice for an extended period, ice may form clumps inside the bucket. If this happens, remove and empty the ice bucket. 1. While grabbing the handle of the ice bucket, slightly lift up the bucket, and then remove it to the front. 2. Remove the remaining ice cubes and put the ice bucket back into place.
If the ice bucket is not firmly inserted, turn the ice screw 90 degrees, and then try again. CAUTION • • • • • • • Do not apply excessive force to the bucket cover. The cover may break. Do not forcefully close the door. Water may spill over the ice maker. To prevent injury, make sure to clean up any ice or water that has spilled on the floor. To prevent accidents or injury, do not let children play with the water dispenser or the ice maker. Do not put your hand or an object into the ice chute.
Maintenance Auto Water Fill 1. Grasp a handle groove of the sealed mouth, and then pull up to remove. 2. Grasp both sides of the sealed mouth, and then lift to remove. 3. While slightly twisting the infuser, pull it out of the sealed mouth. Maintenance 4. Clean the infuser with regular dishwashing liquid and running water. Rinse and dry well. 5. Reassemble the Auto Water Fill in the reverse order of disassembly.
Fridge shelves The appearance of the shelves differs by model. • To remove a shelf, fully open the corresponding door. Hold the front of the shelf, and then gently lift up and slide out. NOTE Do not lift up the shelf fully when removing or reinserting the shelf. The rear wall of the fridge room can be dented. • To reinsert, hold the shelf at an angle so the front is higher than the back, and then insert the top hook into the top shelf notch.
Maintenance Foldable shelf To remove, slide up the front of the shelf so that it folds. Then gently lift up and pull out. To reinsert, place the shelf on the angled frame in the main unit, and then, press down to unfold. CAUTION After sliding the foldable shelf in and folding it, the front of the shelf can be removed for your convenience. If you use the shelf without removing the front of the shelf, be aware that it can separate from the rear portion, be careful of its possible separation.
Vegetable shelf 1. Slide out the left-side vegetable drawer. 2. Fully open the door, and then remove the shelf. 3. While supporting the vegetable shelf with one hand, slide it out with the other hand. NOTE Maintenance To use the space that is opened up after removing the foldable shelf, take out the vegetable shelf. To reinsert, follow the steps above in the reverse order.
Maintenance Door bins • • To remove the top door bin, hold the front sides of the bin, and then gently lift up to remove. To reinsert, insert the door bin slightly above its final location making sure that the back of the bin is against the door. Hold the rear of the door bin with both hands, and then press down so that it fits snugly. CAUTION • • • Do not remove a bin that is filled with food. Empty the bin beforehand.
Fridge drawers Vegetable / fruit drawers Gently lift up the front of the drawer and slide out. • We recommend that you remove the door bins before removing the drawer. This is to prevent damage to the door bins. • To reinsert, insert the drawer into the frame rails and then slide inward. FlexZone™ basket • • • Maintenance To remove, fully open the FlexZone™ drawer. Lift up the FlexZone™ basket, and then pull out with both hands. To reinsert, fully open the FlexZone™ drawer.
Maintenance 3. As the divider has the width and length bars, push the lower part of each bar inward to unlock. See the figures for details. 4. Hold the divider and pull up to remove. 5. Turn over the basket to remove the metal cooling plate. Maintenance CAUTION The basket and the metal cooling plate are heavy. Use caution when handling them. Careless handling may cause personal injury or property damage. To reinsert the metal cooling plate Reinsertion in the reverse order of removal.
Freezer baskets Upper basket • • To remove, fully slide open the freezer drawer. Push the upper basket to the end, and then pull up to remove. To reinsert, align the front wheels of the upper basket with the end of the lower basket. Slide the upper basket to the front. Lower basket • • To remove, first remove the upper basket. Then, tilt up the front of the lower basket to pull out. To reinsert, put the basket into the rail assembly with the rear side first.
Maintenance Cleaning Interior and exterior WARNING • • Do not use benzene, thinner, home/car detergent, or Clorox™ to clean the refrigerator. They may damage the surface of the refrigerator and cause a fire. Do not spray water onto the refrigerator. This may cause electric shock. Regularly use a dry cloth to remove all foreign substances such as dust or water from the power plug terminals and contact points. 1. Unplug the power cord. 2.
Inner-view camera NOTE Use a cotton swab or microfiber cloth to clean the camera on the left-side door of the fridge. Rear panel To keep cords and exposed parts of the rear panel free of dirt, vacuum the panel once or twice a year. Maintenance CAUTION Do not remove the rear panel cover. Electric shock may occur.
Maintenance Replacement Water filter WARNING • • Do not use third-party water filters. Use only Samsung-provided or -approved filters. Unapproved filters may leak and damage the refrigerator, causing electric shock. Samsung is not responsible for any damage that may occur from use of third-party water filters. The Filter Reset indicator ( ) turns red to let you know it is time to replace the water filter. Before replacing the filter, make sure the water supply line is shut off. 1.
3. Insert a new filter cartridge. Use only Samsung-provided or approved filters. 4. Turn the cartridge knob clockwise to lock into place. 5. On the Home screen, tap Fridge Manager > Fridge Settings > Water Filter, and then select RESET. The filter indicator turns off. 6. When you are done replacing the filter, open the water valve and run water through the dispenser for about 7 minutes. This is to remove impurities and air from the water line.
Maintenance Ordering a new filter To purchase a new water filter, contact a local Samsung service center. LED Lamps To replace the lamps of the refrigerator, contact a local Samsung service center. WARNING • The lamps are not user-serviceable. Do not attempt to replace a lamp yourself. This can cause electric shock.
Troubleshooting Before calling for service, review the checkpoints below. Any service calls regarding normal situations (No Defect Cases) will be charged to users. General Temperature Symptom Fridge/freezer does not operate. Possible causes • Power cord is not plugged in properly. • Temperature control is not set correctly. • Refrigerator is located near a heat source or direct sunlight. • Not enough clearance between refrigerator and nearby walls or cabinets. • Energy Saver mode is activated.
Troubleshooting Symptom Possible causes Solution • Interior wall is hot. • Refrigerator has heat-proof piping in the interior wall. To prevent condensation from forming, the refrigerator has heat-proof piping in the front corners. If the ambient temperature rises, this equipment may not work effectively. This is not a system failure. Odors Symptom Refrigerator has odors. Possible causes • Spoiled food. • Food with strong odors. Solution • Clean the refrigerator and remove any spoiled food.
Condensation Symptom Possible causes • If door is left open, moisture enters the refrigerator. • Food with high moisture content. Condensation forms on the interior walls. Solution • Remove the moisture and do not leave a door open for extended periods of time. • Make sure food is wrapped airtight. Water/ice (dispenser models only) Symptom Water flow is weaker than normal. Possible causes • Water pressure is too low.
Troubleshooting Symptom Possible causes • Ice may jam if the ice dispenser is not used for a long time (approx. 3 weeks). • Ice bucket is not properly inserted. Solution • If you won't be using the refrigerator for a long time, empty the ice bucket and turn off the ice maker. • Make sure the ice bucket is properly inserted. • Check if the water line is installed correctly. Check if the water line stop cock is closed. • Check if the water line is installed correctly.
Do you hear abnormal sounds from the refrigerator? Before calling for service, review the checkpoints below. Any service calls related to normal sounds will be charged to the user. These sounds are normal. • When starting or ending an operation, the refrigerator may make sounds similar to a car engine ignition. As the operation stabilizes, the sounds will decrease. Buzzing! Clicking! or Chirping! • While the fan is operating, these sounds may occur.
Troubleshooting • As the refrigerator cools or freezes, refrigerant gas moves through sealed pipes, causing bubbling sounds. Bubbling! • As the refrigerator temperature increases or decreases, plastic parts contract and expand, creating knocking noises. These noises occur during the defrosting cycle or when electronic parts are working. Cracking! • • For ice maker models: When the water valve opens to fill the ice maker, buzzing sounds may occur.
SmartThings Symptom Could not find “SmartThings” in the app market. The SmartThings app fails to operate. The SmartThings app is installed but is not connected to my refrigerator. Could not log into the app. An error message appears when I try to register my refrigerator. The SmartThings app is successfully connected to my refrigerator but does not run. Action • The SmartThings app is designed for Android 6.0 (Marshmallow) or later, iOS 10.
Troubleshooting Samsung Family Hub Symptom Could not find “Samsung Family Hub” in the app market. Could not log into the app. Action • The Samsung Family Hub app is available for smartphones that run Android 4.4 (KitKat) or higher, or iOS 8.0 or higher. • • You must log into your Samsung account to use the app. If you don’t have a Samsung account, follow the app’s onscreen instructions to create one.
Smart Grid Symptom Action To use the Smart Grid (Demand Response) and Energy Management functions on your refrigerator, you need the following: Devices What Do I Need to use the Energy Management and Smart Grid functions? • • • A wireless access point (router) A Samsung Energy Management-supported refrigerator A smartphone Registration • • Connect your refrigerator to your home Wi-Fi network. Register for the EMS service with your electric company.
Troubleshooting LCD Symptom Action • Cannot connect to my TV. • • The inner view picture looks bulged out or incomplete. The displayed measurement on the Fridge Manager is not correct. • • This refrigerator can connect only with Samsung Smart TV 6400 series or higher models released since 2015. Please check the model name of your TV first. Network connections may suffer temporary interruptions. Turn your TV off, and then try again. The edges of the inner view may look bulged out.
LIMITED WARRANTY (U.S.A.) SAMSUNG REFRIGERATOR LIMITED WARRANTY TO ORIGINAL CONSUMER PURCHASER WITH PROOF OF PURCHASE This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc.
LIMITED WARRANTY (U.S.A.
LIMITATION OF REMEDIES YOUR SOLE AND EXCLUSIVE REMEDY IS PRODUCT REPAIR, PRODUCT REPLACEMENT, OR REFUND OF THE PURCHASE PRICE AT SAMSUNG’S OPTION, AS PROVIDED IN THIS LIMITED WARRANTY.
Regulatory Notice FCC Notice FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Contains Transmitter Module FCC ID: A3LWCM730Q This device complies with Part 15 of FCC Rules. Operation is Subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that cause undesired operation.
IC Notice Contains Transmitter Module IC: 649E-WCM730Q The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions : (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
DECLARATION OF CONFORMITY According to Sec. 2.1077, 47 CFR of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Memo Untitled-7 91 2018-08-27 4:41:15
Scan the QR code* or visit www.samsung.com/spsn to view our helpful How-to Videos and Live Shows * Requires reader to be installed on your smartphone Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG Customer Care Center. Country U.S.A CANADA Contact Center 1-800-SAMSUNG (726-7864) 1-844-SAM-PAYS (726-7297) Web Site www.samsung.com/us/support 1-800-SAMSUNG (726-7864) www.samsung.
Refrigerador Manual del usuario Electrodoméstico independiente Untitled-3 1 2018-08-27 5:20:42
Contenido Información sobre seguridad 4 Contenido Símbolos y advertencias de seguridad importantes: Advertencia sobre la State of California Proposition 65 (solo EE.UU.
75 General ¿Se oyen ruidos anómalos procedentes del refrigerador? SmartThings Samsung Family Hub Smart Grid LCD 75 80 82 83 84 85 GARANTÍA LIMITADA (EE.UU.
Información sobre seguridad • • • Información sobre seguridad • • Antes de utilizar su nuevo refrigerador Samsung, lea detenidamente este manual a fin de aprender a usar las funciones que ofrece de manera segura y eficiente.
Símbolos y advertencias de seguridad importantes: Sírvase seguir todas las instrucciones de seguridad del presente manual. En el presente manual se utilizan los siguientes símbolos de seguridad. ADVERTENCIA Información sobre seguridad Riesgos o prácticas inseguras que pueden causar graves lesiones personales, daños a la propiedad y/o incluso la muerte. PRECAUCIÓN Riesgos o prácticas inseguras que pueden causar lesiones personales leves y/o daños materiales.
Información sobre seguridad Advertencias muy importantes para la instalación ADVERTENCIA • No instale el refrigerador en un lugar húmedo o donde pueda entrar en contacto con agua. - Información sobre seguridad • • El aislamiento deficiente de las piezas eléctricas puede provocar una descarga eléctrica o un incendio. No exponga este refrigerador a la luz solar directa ni al calor de estufas, calefactores u otros electrodomésticos. No enchufe varios electrodomésticos en la misma toma múltiple.
• • • Asegúrese de que el enchufe no esté aplastado ni haya sido dañado por la parte posterior del refrigerador. Mantenga los materiales de empaque fuera del alcance de los niños. - Existe el riesgo de muerte por asfixia si un niño se coloca los materiales de empaque en la cabeza. El electrodoméstico debe colocarse de manera tal que se pueda acceder al enchufe después de la instalación. • No seguir esta recomendación puede causar una descarga eléctrica o un incendio debido a una fuga de electricidad.
Información sobre seguridad • • • Información sobre seguridad • • • • Conecte bien el enchufe a la toma de pared. No utilice enchufes o cables de alimentación dañados ni enchufes de pared flojos. - Esto podría causar una descarga eléctrica o un incendio. Si el cable de alimentación está dañado, solicite su reemplazo de inmediato al fabricante o a uno de los agentes de servicio técnico.
• No coloque objetos en la parte superior de la unidad. - • • • • - Esto podría causar una descarga eléctrica o lesiones personales. - Algunos bordes filosos podrían provocar lesiones personales. No toque las paredes internas del congelador ni los productos almacenados en este con las manos mojadas. Información sobre seguridad • Cada vez que abra o cierre la puerta, estos podrían caerse y provocar lesiones personales o daños materiales.
Información sobre seguridad • No permita que los bebés ni los niños ingresen al cajón. • - Esto puede provocar muerte por asfixia debido al encierro o lesiones personales. No sobrecargue el refrigerador con comida. - • Cuando abra la puerta, algún elemento podría caerse y provocar lesiones personales o daños materiales. No pulverice material volátil, tal como un insecticida, sobre la superficie del electrodoméstico.
• • • • - Puede provocar lesiones personales o daños materiales. No intente reparar, desensamblar ni modificar el refrigerador por su cuenta. Información sobre seguridad • Utilice solamente lámparas LED proporcionadas por el fabricante o sus agentes de servicio técnico. Las botellas se deben almacenar una junto a otra de manera tal que no se tumben ni se caigan. Este producto se debe utilizar solo para almacenar alimentos en un entorno doméstico.
Información sobre seguridad Precauciones de uso PRECAUCIÓN • • • No vuelva a congelar alimentos que se hayan descongelado completamente. Utilice solamente la fábrica de hielo del refrigerador. Para obtener el mejor desempeño del producto: Información sobre seguridad - • No coloque alimentos muy cerca de las rejillas de ventilación en la parte posterior del refrigerador, ya que pueden obstruir la libre circulación del aire en el compartimiento del refrigerador.
Precauciones para la limpieza PRECAUCIÓN No pulverice con agua directamente dentro o fuera del refrigerador. • • - Existe el riesgo de que se produzca un incendio o una descarga eléctrica. No utilice un secador de cabello para secar el interior del refrigerador. No coloque velas encendidas en el refrigerador para eliminar los malos olores. • - Esto podría causar una descarga eléctrica o un incendio. No rocíe productos de limpieza directamente sobre el visor.
Información sobre seguridad Advertencias muy importantes para la eliminación de residuos ADVERTENCIA • PELIGRO : Existe el riesgo de que los niños queden encerrados. Antes de desechar su antiguo refrigerador o congelador: Información sobre seguridad - • • • • • • Retire las puertas y los pestillos. Deje los estantes en su lugar de manera tal que los niños no puedan entrar fácilmente al electrodoméstico.
Instalación Siga las instrucciones cuidadosamente a fin de garantizar la instalación adecuada del refrigerador y de evitar accidentes antes de utilizarlo. ADVERTENCIA • • • • Utilice el refrigerador solamente para su uso previsto como se describe en este manual. Todas las reparaciones deben estar a cargo de un técnico calificado. Descarte el material de empaque del producto de acuerdo con la normativa local.
Instalación 01 Fábrica de hielo automática 02 Estante plegable de 1 posición 03 Tanque de agua (Infusor de autollenado) 04 FlexZone™ 05 Congelador 06 Compartimientos de las puertas 07 Estante plegable de 2 posiciones 08 Filtro de agua * solo para los modelos correspondientes NOTA • • Instalación • • • • • Para una mayor eficiencia energética, asegúrese de que todos los estantes, cajones y canastos estén en su posición original.
Instalación paso a paso PASO 1 Seleccione un lugar Seleccione un lugar que: • • • • • • Tenga una superficie sólida, nivelada sin alfombrado ni pisos que puedan obstruir la ventilación Esté alejado de la luz solar directa Cuente con el lugar adecuado para abrir y cerrar la puerta Esté alejado de las fuentes de calor Cuente con lugar para realizar mantenimiento y reparaciones Cuente con un rango de temperatura de entre 50 °F (10 °C) y 109 °F (43 °C) PRECAUCIÓN • Instalación • Si su refrigerador cuenta c
Instalación Modelo 01 01 04 02 02 03 02 04 03 05 Instalación 06 08 09 10 11 07 08 09 2" (50 mm) (50 mm) 135° 135° 62” 64” (1575 mm) (1624 mm) 13 /4" 14 1/8" (333.5 mm) (358 mm) 35 /4" 35 3/4" (908 mm) (908 mm) 24" 24" (610 mm) (610 mm) 1 2 /2" 2 1/2" (64 mm) (64 mm) - 11 4 1/8" (104 mm) 3 1 /4" 1 3/4" (45.4 mm) (45.4 mm) 43 /8" 43 1/8" (1095.5 mm) (1095.
PASO 2 Piso Si el refrigerador no pasa por la puerta por su tamaño, consulte PASO 3 Extracción de la puerta para la entrada. NOTA Instalación Para evitar que se dañe el piso, asegúrese de que las patas de nivelación delanteras estén en posición vertical. • La superficie sobre la que se instalará el refrigerador debe soportar un refrigerador completamente cargado. • A fin de proteger el piso, coloque un trozo de cartón por el recorrido del refrigerador hasta su ubicación final.
Instalación PASO 3 Extracción de la puerta para la entrada Si el refrigerador no pasa por la entrada de su casa o de la cocina por una cuestión de tamaño, siga estas instrucciones para extraer y colocar nuevamente las puertas del refrigerador. Si no necesita retirar las puertas, vaya a la página 27 para continuar con el procedimiento de instalación. ADVERTENCIA Desenchufe el cable de alimentación del refrigerador antes de retirar las puertas.
Retire las puertas del refrigerador 1. Con la puerta abierta, retire los tornillos de la cubierta superior. 2. Desconecte los cables y el tubo de agua de la puerta izquierda. Haga lo siguiente en orden: • Desconecte el conector. • Sosteniendo un extremo del acoplador de la tubería de agua, desconecte el tubo de agua. Instalación PRECAUCIÓN Mantenga las grapas del tubo de agua fuera del alcance de los niños. 3. • • • Retire las bisagras superiores. Tire de la palanca de la bisagra y retírela.
Instalación 4. Levante la puerta en línea recta para retirarla. • Repita este paso del otro lado. PRECAUCIÓN No retire ambas puertas simultáneamente. Asegúrese de retirar una puerta por vez. De lo contrario, alguna podría caerse y provocar lesiones. Instalación 5. Retire la bisagra del medio. • Retire el tornillo de la bisagra usando el destornillador Phillips. • Retire 2 pernos de cabeza hexagonal de la bisagra usando una llave Allen (1/4", 5 mm). • Retire la bisagra del medio.
Retire el cajón FlexZone™ 1. Levante la cesta FlexZone™ para retirarla. 2. Retire la cubierta del cable con arnés con un destornillador plano. Instalación 3. Presione la pestaña de bloqueo y desenchufe el conector del cable. 4. Retire el perno de cabeza hexagonal de cada lado con una llave de tubo (3/8", 10 mm) o un destornillador.
Instalación 5. Levante el frente del cajón de FlexZone™ para retirarlo del conjunto de riel. PRECAUCIÓN • • Instalación • Tenga cuidado al retirar el conjunto de riel, ya que podría caerse y dañar el piso. Asegúrese de colocar el cajón FlexZone™ en su lugar antes de retirar o instalar la cesta FlexZone™. Es posible que el cajón FlexZone™ no se abra o cierre correctamente si el cajón del congelador no está colocado. No almacene demasiados alimentos en el cajón FlexZone™.
Retire el cajón del congelador 1. Empuje la cesta superior hasta el final y luego levántela para quitarla. 2. Tire de la cesta inferior para retirarla del conjunto de riel. Instalación 3. Presione los ganchos para desbloquear el conjunto de riel. 4. Mientras sostiene la parte superior del frente del cajón del congelador, deslícelo hacia afuera para retirar el cajón del congelador del conjunto de riel.
Instalación PRECAUCIÓN • • • Instalación • • Asegúrese de instalar las cestas del congelador en la posición correcta. De lo contrario, el cajón no se podrá abrir ni cerrar correctamente, lo que provocará la acumulación de escarcha. No almacene demasiados alimentos en las cestas del congelador. Esto hará que el cajón del congelador no se cierre correctamente y se acumule escarcha. Con la cesta inferior totalmente abierta, coloque la cesta superior en el cajón del congelador.
PASO 4 Nivelación del refrigerador PRECAUCIÓN • • • • El refrigerador debe estar sobre un piso plano y sólido. No hacerlo puede provocar daños al refrigerador o lesiones personales. La nivelación debe realizarse con el refrigerador vacío. Asegúrese de que no haya alimentos dentro del refrigerador. Además, abra el cajón del congelador y extraiga la cesta inferior. Por razones de seguridad, ajuste el refrigerador de manera que la parte delantera quede más elevada que la parte trasera.
Instalación PASO 5 Ajuste de la altura de la puerta y del espacio de la puerta Anillos elásticos Es posible ajustar la altura de la puerta mediante los anillos elásticos provistos que vienen en 4 tamaños diferentes (1 mm, 1.5 mm, 2 mm y 2.5 mm). Para ajustar la altura de una puerta 1. Controle la diferencia de altura entre las puertas y luego eleve y sostenga la puerta más baja. Instalación 2. Inserte un anillo elástico (A) del tamaño adecuado entre la puerta y la bisagra como se ilustra.
PASO 6 Conectar la tubería del dispensador de agua El dispensador de agua con filtro es una de las funciones útiles de su nuevo refrigerador. Con el fin de promover la buena salud, el filtro de agua elimina las partículas no deseadas del agua. No obstante, no la esteriliza ni destruye los microorganismos. Para eso, necesita adquirir un sistema de purificación de agua. La tubería del agua también se conecta a la fábrica de hielo.
Instalación Conecte la tubería de suministro de agua al refrigerador Para llevar a cabo la conexión, necesita adquirir varios elementos. Posiblemente su ferretería local los venda todos juntos en un equipo. Tubería de cobre • • • Tubería de cobre de 1/4" Tuerca de compresión de 1/4" (1) Férula (2) Tubería de plástico • • Tubería de plástico de 1/4" Extremo moldeado (bulbo) Tuerca de compresión de 1/4" (1) A. Refrigerador B. Tubería de suministro del agua corriente C C.
PRECAUCIÓN • • Si utiliza una tubería de plástico (A), no la use sin el extremo moldeado (bulbo). Dejar la tubería de agua desconectada puede causar que con el tiempo la válvula de agua emita un zumbido. En este caso, asegúrese de desactivar la fábrica de hielo colocándola en “OFF” y no intente usar el dispensador de agua. 2. Ajuste la tuerca de compresión (B) sobre el acople de compresión. No ajuste demasiado la tuerca de compresión (B). 3. Abra el agua y verifique si hay alguna fuga.
Instalación PASO 7 Configuración inicial Al completar los siguientes pasos, el refrigerador quedará en perfectas condiciones de funcionamiento. PRECAUCIÓN 1 Antes de instalar el refrigerador, asegúrese de retirar la cubierta protectora (1) de la parte superior de la puerta del refrigerador. De lo contrario, podrían producirse lesiones con la cuchilla trituradora de hielo. 1. Enchufe el cable de alimentación al tomacorriente para encender el refrigerador. 2.
Funcionamiento Interfaz del usuario NOTA • • • • Para obtener una información detallada de las funciones y aplicaciones del refrigerador, consulte el manual de usuario en pantalla disponible en el visor LCD de su refrigerador. El contenido de las aplicaciones y widgets, así como su diseño, están sujetos a modificaciones. El soporte técnico para aplicaciones y widgets puede interrumpirse sin aviso dependiendo de la política del proveedor de contenidos.
Funcionamiento 01 Pantalla de Inicio 02 01 01 Aplicaciones y widgets • Toque la aplicación o el widget deseado para iniciarlo. • Mantenga presionada la aplicación o el widget para ingresar al modo de edición. Aparece una cuadrícula. En el modo Editar, puede arrastrar y soltar una aplicación o un widget en una nueva ubicación de la cuadrícula. Cuando desplaza una aplicación o un widget a una nueva ubicación de la cuadrícula, la ubicación se vuelve azul si está disponible.
Indica que hay un mensaje de notificación. Notificación ( ) Sincronización de nube ( ) Indica que Family Hub está recibiendo datos del servidor de nube. 02 Barra de tareas 01 02 03 04 05 01 Micrófono 02 Menú Toque para activar o desactivar la función de reconocimiento de voz. El icono del micrófono se pone rojo cuando está apagado. Toque para mostrar los menús disponibles. • • 03 Inicio 04 Regresar Toque para regresar a la pantalla anterior. 05 Notificación Toque para mostrar el Panel rápido.
Funcionamiento Administrador del refrigerador Para acceder al Administrador del refrigerador, deslice el dedo por la pantalla de Inicio hacia la izquierda y, luego, toque el widget Administrador del refrigerador. • • • • • Toque < o > en la parte inferior del widget para desplazarse entre las páginas. En la primera página puede verificar las temperaturas actuales o los modos de cada compartimiento, así como las funciones activas.
04 05 El Administrador del refrigerador es una representación gráfica de su refrigerador. La mitad superior representa el compartimiento del congelador, la parte inferior izquierda el compartimiento del congelador y la parte inferior derecha la FlexZone. Los ajustes de temperatura o modo de cada una se muestran en la sección correspondiente. 06 01 Descripción breve del Administrador del refrigerador 01 Temperatura Cambiar la temperatura del Refrig, Congel y FlexZone.
Funcionamiento 5. Estado del Infusor de autollenado Muestra el estado de la función de llenado automático de agua. 6. Estado de la Fábrica de hielo Muestra el estado actual de la fábrica de hielo. NOTA • • También se muestra el indicador Fábrica de hielo desactivada en el centro de la parte superior. Cuando el indicador muestra Fábrica de hielo desactivada, la fabricación de hielo del refrigerador se apaga.
Proporciona un tutorial sobre el reemplazo del filtro de agua y permite restablecer el indicador de reemplazo del mismo. Toque para abrir. NOTA Filtro • • Autoverificación Ahorro de energía Después de instalar el filtro de agua, toque Filtro y luego toque Restablecer. Al tocar Restablecer se reinicializa la función que mide el tiempo que falta para que sea necesario volver a reemplazar el filtro de agua. Si toca Comprar filtro se le redirigirá al sitio web donde puede comprar un filtro de agua.
Funcionamiento Ajustes • Permite ajustar el brillo de la pantalla, los fondos, la activación automática, el detector de movimiento, el tema, el tiempo de espera de pantalla y la duración del protector de pantalla. • Permite ajustar el volumen y el ecualizador y activar o desactivar el sonido sensible al tacto. • Encienda o apague una conexión Wi-Fi.
• Acerca del dispositivo • • Conexión fácil se puede utilizar con las aplicaciones de los teléfonos inteligentes Samsung y le permite conectar su dispositivo a la misma red Wi-Fi a la que está conectado el teléfono. • Actívelo para limpiar la pantalla sin activar ninguna aplicación. Accesibilidad • Ajústelo para activar o desactivar la función de lector de pantalla para usuarios invidentes o con problemas de visión.
Funcionamiento Restablecimiento del visor (solo para los modelos correspondientes) Si el visor no funciona correctamente, restablézcalo. Esto podría resolver el problema. 1. Abra la puerta derecha del refrigerador y localice la cubierta del interruptor en la esquina superior derecha de la puerta. 2. Empuje hacia arriba la cubierta para revelar el interruptor de encendido. 3. Apague el interruptor y vuelva a encenderlo. 4. Vuelva a colocar completamente la cubierta del interruptor hasta oír un clic.
SmartThings Instalación Visite Google Play Store, Galaxy Apps o Apple App Store y busque “SmartThings”. Descargue e instale la aplicación SmartThings provista por Samsung Electronics en su dispositivo inteligente. NOTA • • • • • • • • Funcionamiento • La aplicación SmartThings se ha diseñado para Android 6.0 (Marshmallow) o posterior, iOS 10.0 o posterior, iPhone 6 o posterior, y está optimizada para teléfonos inteligentes Samsung (series Galaxy S y Galaxy Note).
Funcionamiento Cuenta Samsung Debe registrar su cuenta Samsung para utilizar la aplicación. Si no tiene una cuenta Samsung, siga las instrucciones en pantalla de la aplicación para crear una cuenta Samsung gratuita. Cómo comenzar Encienda el dispositivo que desea conectar, abra la aplicación SmartThings en su teléfono y siga las instrucciones que figuran a continuación. Si aparece un mensaje emergente que indica que se encontró un nuevo dispositivo, toque ADD NOW (AGREGAR AHORA).
Categoría Supervisión Sección Descripción Temperatura del refrigerador Muestra la configuración actual de la temperatura del refrigerador. Temperatura del congelador Muestra la configuración actual de la temperatura del congelador. Configuración de FlexZone™ Muestra la configuración de FlexZone™. Diagnóstico Detecta funcionamientos anormales del refrigerador. Monitoreo de energía Verifica el consumo de energía acumulado del refrigerador durante los últimos 180 días.
Funcionamiento Función SMART GRID (respuesta a la demanda) Cuando el refrigerador opera en modo SMART GRID (respuesta a la demanda), la función de gestión de energía del refrigerador permite controlar el uso de la energía o demorar algunas funciones para ahorrar dinero cuando el precio de la energía o la demanda son más elevados. NOTA • • Se puede desactivar la función SMART GRID (respuesta a la demanda) en cualquier momento utilizando la función de activación/desactivación de la anulación.
Para verificar la dirección MAC 1. Toque el icono Ajustes en la pantalla de Inicio. 2. Desplácese hacia abajo hasta Agregar dispositivo y ábralo. 3. La pantalla muestra (entre otras cosas) la dirección MAC de Wi-Fi. Modo de anulación Cuando desee que el refrigerador ignore la señal SMART GRID (respuesta a la demanda) de la compañía de servicio eléctrico, puede activar el modo OVERRIDE (ANULAR).
Funcionamiento Uso de la función de gestión de energía La función de gestión de energía permite controlar y supervisar el estado del refrigerador Energy Management mediante la aplicación SmartThings para su comodidad. NOTA • Para usar las funciones del refrigerador Energy Management, en primer lugar debe instalar la aplicación correspondiente. 1. Estado de funcionamiento - Puede verificar los estados de DR y de Anulación. 2. Informe del consumo de energía - Muestra el consumo de energía acumulado.
Facilitación de acceso abierto a los requisitos del producto conectado 1. SGIP Open Standards (Smart Energy Profile 2.0 http://www.csep.org/) - Informe del consumo de energía Respuesta a la demanda 2.
Funcionamiento Recomendaciones relativas al reconocimiento de voz Para la función de reconocimiento de voz, en la parte superior de la pantalla del refrigerador se encuentra un micrófono incorporado. Para usar la función de reconocimiento de voz: • • Desde una distancia no superior a 3 pies (1 metro) del refrigerador, hable fuerte y claro hacia el micrófono incorporado. Hable a un ritmo regular. Reduzca el ruido ambiental, como el de la sala del televisor.
Cuenta Samsung Debe registrar su cuenta Samsung para utilizar la aplicación Samsung Family Hub. Si no tiene una cuenta Samsung, siga las instrucciones en pantalla de la aplicación para crear una cuenta Samsung gratuita. NOTA Para conectar el teléfono inteligente y el refrigerador, registre su cuenta Samsung en Ajustes Perfil. Elemento Descripción Calendario Puede compartir su programación con la familia. Tarea pendiente Puede crear y editar una lista de tareas pendientes.
Funcionamiento Panel del dispensador 04 01 02 03 01 Water (Agua) / Lock (Bloqueo) 02 Cubed Ice (Hielo en cubos) 03 Crushed Ice (Hielo triturado) / Lighting (Luz) 04 Luz ambiente del dispensador 01 Agua / Bloqueo (3 s) Water (Agua) Funcionamiento Lock (Bloqueo) (Panel del dispensador/ Palanca del dispensador) Para dispensar agua fría presione Water (Agua). Se enciende el indicador correspondiente.
03 Hielo triturado / Luz (3 s) Crushed Ice (Hielo triturado) Presione Crushed Ice (Hielo triturado) para dispensar hielo triturado. Se enciende el indicador correspondiente. Lighting (Luz) En forma predeterminada, la luz del dispensador se enciende únicamente cuando se lo utiliza. Para mantener la luz del dispensador encendida, mantenga Crushed Ice (Hielo triturado) presionado durante 3 segundos. Para apagar la luz, vuelva a mantener Crushed Ice (Hielo triturado) presionado durante 3 segundos.
Funcionamiento Funciones especiales Tanque de agua (Llenado automático de agua) La función de llenado automático de agua le permite disfrutar de té frío preparado en el refrigerador. 01 02 01 02 03 04 Tapa Boca sellada Infusor Cuerpo 03 04 Para llenar el tanque de agua 1. Sujete una de las ranuras de la manija de la boca sellada y tire hacia arriba para abrir la tapa. Funcionamiento 2. Coloque hojas de té o frutos a gusto en el infusor.
5. Para beber té, abra la puerta y retire el tanque de agua. Tire de este en línea recta. PRECAUCIÓN • • Se recomienda consumir el agua infusionada de frutos antes de que transcurran 24 horas. Después de este tiempo, el agua infusionada se puede estropear. Debe limpiar el tanque de agua después de consumir el agua infusionada o cuando no se lo ha utilizado por mucho tiempo. Para evitar que el tanque de agua se caiga o pierda, asegúrese de que encaje bien en el soporte del tanque de agua.
Funcionamiento NOTA • • Si la parte delantera (área marcada específicamente) del tanque de agua tiene mucha humedad, es posible que el tanque de agua no se llene completamente. Quite la humedad e intente nuevamente. El llenado automático de agua detendrá el suministro de agua al tanque si éste no se llena después de un determinado periodo de tiempo. Si esto ocurriera, verifique que la tubería de agua esté conectada correctamente. Retire el tanque de agua, insértelo nuevamente y vuelva a intentarlo.
Para dispensar agua con hielo 1. Con la fábrica de hielo activada, presione Hielo en cubos o Hielo triturado para seleccionar el tipo de hielo. 2. Coloque un vaso para agua bajo el dispensador y presione la palanca del dispensador con el vaso. El hielo saldrá del dispensador. 3. Presione Agua para seleccionar agua. 4. Presione la palanca del dispensador con el vaso. Saldrá agua del dispensador.
Funcionamiento Diagnóstico Si el hielo no sale, controle la fábrica de hielo. 1. Presione Prueba sobre el lateral de la fábrica de hielo. Escuchará una señal sonora (campana) al presionar el botón. 2. Escuchará otra señal sonora si la fábrica de hielo funciona correctamente. PRECAUCIÓN • • • • Funcionamiento • • Si la señal sonora de fabricación de hielo suena repetidamente, comuníquese con el instalador de la tubería de agua o un Centro de Servicio Samsung local.
Separador de FlexZone™ Puede modificar la posición del separador. Para ello, destrabe el separador girando el dial del separador en el sentido contrario al de las agujas del reloj. Luego, mueva las barras de ancho y alto según corresponda. Cuando termine, gire el dial en el sentido de las agujas del reloj para trabar el separador. NOTA Si la traba del separador no funciona, limpie las barras para quitarles la humedad.
Mantenimiento Manipulación y cuidado Cubeta de hielo Si no sirve hielo durante un período prolongado, el hielo puede apelmazarse en la cubeta. Si esto ocurriera, retire y vacíe la cubeta de la fábrica de hielo. 1. Sosteniendo la manija de la cubeta de hielo, levante la cubeta ligeramente y luego retírela hacia adelante. 2. Extraiga los cubos de hielo restantes y coloque la cubeta de hielo en su lugar.
Si la cubeta de hielo no estuviera bien insertada, gire el tornillo 90 grados e inténtelo nuevamente. PRECAUCIÓN • • • • • • • No use fuerza excesiva sobre cubierta de la cubeta. La cubierta puede romperse. No cierre la puerta por la fuerza. Puede derramarse agua sobre la fábrica de hielo. Para evitar lesiones, asegúrese de limpiar el hielo o el agua que pueda haberse derramado en el suelo.
Mantenimiento Infusor de autollenado 1. Sujete una de las ranuras de la manija de la boca sellada y tire hacia arriba para retirar. 2. Sujete ambos lados de la boca sellada y luego levántela para retirarla. 3. Quite el infusor de la boca sellada girándolo ligeramente. 4. Clean the infuser with regular dishwashing liquid and running water. Rinse and dry well. Mantenimiento 5. Vuelva a ensamblar el llenado automático de agua en orden inverso al desensamble.
Estantes del refrigerador El aspecto de los estantes varía según el modelo. • Para retirar un estante, abra la puerta correspondiente por completo. Sostenga la parte delantera del estante y luego levántelo suavemente y deslícelo hacia afuera. NOTA No levante el estante por completo al retirar o reinsertar el estante. La pared posterior del refrigerador podría abollarse.
Mantenimiento Estante plegable Para retirarlo, deslice el frente del estante hacia arriba para que se pliegue. Luego, levántelo suavemente y tire hacia afuera. Para volver a colocarlo, coloque el estante en el marco de la unidad principal y luego, presiónelo para desplegarlo. PRECAUCIÓN Después de deslizar el estante plegable y plegarlo, puede retirar el frente del estante según su conveniencia.
Estante para vegetales 1. Deslice hacia afuera el cajón de vegetales izquierdo. 2. Abra la puerta completamente y retire el estante. 3. Mientras sujeta con una mano el estante de vegetales, deslícelo hacia afuera con la otra mano. NOTA Mantenimiento Para utilizar el espacio que queda después de retirar el estante plegable, extraiga el estante de vegetales. Para insertarlo nuevamente, realice el procedimiento en el orden inverso.
Mantenimiento Compartimientos de las puertas • • Para retirar el compartimiento superior de la puerta, sostenga ambos lados delanteros del compartimiento y levántelo suavemente para retirarlo. Para volver a colocarlo, coloque el compartimiento de la puerta ligeramente por encima de su ubicación final asegurándose de que la parte posterior del compartimiento esté contra la puerta. Sostenga la parte posterior del compartimiento de la puerta con ambas manos y presiónelo para que encaje bien.
Cajones del refrigerador Cajones de vegetales/frutas Levante suavemente el frente del cajón y deslícelo hacia afuera. • Se recomienda retirar los compartimientos de la puerta antes de retirar el cajón. Esto es para evitar que se dañen. • Para volver a colocarlo, inserte el cajón en los rieles y deslícelo hacia adentro. Cesta FlexZone™ • • • Para retirarla, abra el cajón FlexZone™ completamente. Levante la cesta FlexZone™ y tire hacia afuera con ambas manos.
Mantenimiento 3. Puesto que el separador tiene barras a lo ancho y a lo largo, empuje la parte inferior de cada barra para destrabarlo. Consulte las figuras para obtener más detalles. 4. Sostenga el separador y levántelo para separarlo. 5. Dé vuelta la cesta para retirar la placa para enfriamiento metálica. Mantenimiento PRECAUCIÓN La cesta y la placa para enfriamiento metálica son pesadas. Tenga cuidado al manipularlas. Una manipulación negligente puede causar lesiones personales o daños materiales.
Cestas del congelador Cesta superior • • Para retirarla, abra el cajón del congelador completamente. Empuje la cesta superior hasta el final y luego levántela para quitarla. Para volver a colocarla, alinee las ruedas delanteras de la cesta superior con el extremo de la cesta inferior. Deslice la cesta superior hacia adelante. Cesta inferior • • Para retirarla, primero debe retirar la cesta superior. Luego, incline el frente de la cesta inferior hacia arriba para retirarla.
Mantenimiento Limpieza Interior y exterior ADVERTENCIA • • No limpie el refrigerador con benceno, disolvente, detergente para automóviles/hogareño o Clorox™ (blanqueador). Pueden dañar la superficie del refrigerador y provocar un incendio. No rocíe agua sobre el refrigerador. Puede provocar una descarga eléctrica. Utilice un paño seco regularmente para retirar cualquier sustancia extraña como polvo o agua de las terminales del enchufe de alimentación y los puntos de contacto. 1.
Cámara de visión interna NOTA Use un hisopo de algodón o un paño de microfibra para limpiar la cámara de la puerta del lado izquierdo del refrigerador. Panel posterior Para mantener los cables y las partes expuestas del panel posterior libres de polvo, aspire el panel una o dos veces al año. Mantenimiento PRECAUCIÓN No retire la cubierta del panel posterior. Podría producirse una descarga eléctrica.
Mantenimiento Reemplazo Filtro de agua ADVERTENCIA • • No utilice filtros de agua de terceros. Utilice únicamente filtros provistos o aprobados por Samsung. Los filtros no aprobados pueden provocar pérdidas y daños al refrigerador y descargas eléctricas. Samsung no se hace responsable por los daños que puedan generarse a partir del uso de filtros de terceros. El indicador de restablecimiento del filtro) ( ) se pone rojo para recordarle que es momento de cambiar el filtro.
3. Inserte un nuevo cartucho de filtro. Utilice únicamente filtros provistos o aprobados por Samsung. 4. Gire la perilla del filtro en el sentido de las agujas del reloj para trabarlo en su posición. 5. En la pantalla de inicio, toque Administrador del refrigerador > Ajustes del refrigerador > Filtro y, luego, seleccione RESTABLECER. El indicador del filtro se apaga. 6. Al finalizar el reemplazo del filtro, abra la válvula de agua y deje correr el agua por el dispensador durante unos 7 minutos.
Mantenimiento Pedir un filtro nuevo. Para comprar un nuevo filtro de agua, comuníquese con un centro de servicios Samsung local. Lámparas de LED Para reemplazar las lámparas del refrigerador, comuníquese con un centro de servicios Samsung local. ADVERTENCIA • El usuario no debe reemplazar las lámparas. No intente reemplazar la lámpara usted mismo. Puede provocar una descarga eléctrica.
Solución de problemas Antes de solicitar servicio técnico revise los siguientes puntos de verificación. En el caso de solicitudes de servicio para situaciones normales (cuando no existe ningún defecto), se exigirá un cargo a los usuarios. General Temperatura Síntoma El refrigerador/ congelador no funciona. La temperatura del refrigerador/congelador es elevada. El refrigerador/ congelador enfría demasiado. Causas posibles Solución • El cable de alimentación no está conectado correctamente.
Solución de problemas Síntoma Causas posibles Solución • La pared interna está caliente. • El refrigerador cuenta con tuberías a prueba de calor en la pared interna. A fin de evitar que se forme condensación, el refrigerador cuenta con tuberías a prueba de calor en los ángulos frontales. Si la temperatura aumenta, es posible que el equipo no funcione eficazmente. No se trata de una falla del sistema. Olores Síntoma Causas posibles • Alimentos descompuestos. • Alimentos con olores fuertes.
Condensación Síntoma Se forma condensación en las paredes internas. Causas posibles Solución • Si se deja la puerta abierta, entra humedad en el refrigerador. • Retire la humedad y no deje la puerta abierta durante períodos prolongados. • Alimentos con elevado contenido • de humedad. Asegúrese de que los alimentos estén envueltos al vacío. Agua/hielo (solo para modelos con dispensador) Síntoma Sale menos agua de lo normal. Causas posibles • La presión del agua es demasiado baja.
Solución de problemas Síntoma Causas posibles • El hielo puede atascarse si el dispensador de hielo no se utiliza durante un periodo largo de tiempo (aproximadamente 3 semanas). • La cubeta de hielo no está insertada correctamente. No se dispensa hielo. • La tubería de agua no está conectada correctamente o el suministro de agua está cerrado. Solución • Si no utilizará el refrigerador por un periodo de tiempo prolongado, vacíe la cubeta de hielo y apague la fábrica de hielo.
Síntoma No se dispensa agua. Causas posibles • La tubería de agua no está conectada correctamente o el suministro de agua está cerrado. • El bloqueo del dispensador está activado. • Se instaló un filtro de agua de terceros. Solución • Verifique que la tubería de agua esté instalada correctamente. Verifique que la llave de paso de la tubería de agua no esté cerrada. • Desactive el bloqueo del dispensador. • Utilice únicamente filtros provistos o aprobados por Samsung.
Solución de problemas ¿Se oyen ruidos anómalos procedentes del refrigerador? Antes de solicitar servicio técnico revise los siguientes puntos de verificación. En el caso de solicitudes de servicio relacionado con ruidos normales se exigirá un cargo al usuario. Dichos ruidos son normales. • Cuando se inicia o finaliza una operación, el refrigerador puede emitir unos sonidos similares al encendido del motor de un auto. Cuando la operación se estabiliza, el ruido disminuye.
• Cuando el refrigerador enfría o congela, el gas refrigerante circula por las tuberías selladas y produce ruidos de burbujas. Burbujeo • Cuando la temperatura del refrigerador aumenta o disminuye, las partes plásticas se contraen y se expanden y producen ruidos de golpeteo. Dichos ruidos se producen durante el ciclo de descongelación o cuando las piezas electrónicas están funcionando.
Solución de problemas SmartThings Síntoma No se encuentra “SmartThings” en el mercado de aplicaciones. La aplicación SmartThings no funciona. Acción • La aplicación SmartThings se ha diseñado para Android 6.0 (Marshmallow) o posterior, iOS 10.0 o posterior, iPhone 6 o posterior, y está optimizada para teléfonos inteligentes Samsung (series Galaxy S y Galaxy Note). • La aplicación SmartThings está disponible únicamente para los modelos correspondientes.
Samsung Family Hub Síntoma No se encuentra “Samsung Family Hub” en el mercado de aplicaciones. No se puede iniciar una sesión en la aplicación. Acción • La aplicación Samsung Family Hub se encuentra disponible para los teléfonos inteligentes que utilizan Android 4.4 (KitKat) o superior, o iOS 8.0 o superior. • Debe iniciar una sesión con su cuenta Samsung para utilizar la aplicación. Si no tiene una cuenta Samsung, siga las instrucciones en pantalla de la aplicación para crear una.
Solución de problemas Smart Grid Síntoma Acción Para usar las funciones Smart Grid (respuesta a la demanda) y de gestión de energía del refrigerador, se necesita lo siguiente: Dispositivos ¿Qué necesito para utilizar las funciones de gestión de energía y Smart Grid? • • • Un punto de acceso inalámbrico (enrutador) Un refrigerador que admita Samsung Energy Management Un teléfono inteligente Registro • • Conecte el refrigerador a su red Wi-Fi doméstica.
LCD Síntoma Acción • No puedo conectarme al televisor. • • La imagen de la vista interior se ve deformada o incompleta. La medición que se muestra en el Administrador del refrigerador no es correcta. • • Este refrigerador solo puede conectarse con modelos Samsung Smart TV de la serie 6400 o superior comercializados a partir de 2015. Revise primero el nombre de modelo de su televisor. Las conexiones de red pueden interrumpirse temporalmente. Apague el televisor y vuelva a intentarlo.
GARANTÍA LIMITADA (EE.UU.) REFRIGERADOR SAMSUNG GARANTÍA LIMITADA AL COMPRADOR ORIGINAL CON COMPROBANTE DE COMPRA Este producto de marca SAMSUNG, suministrado y distribuido por Samsung Electronics America, Inc.
Esta garantía limitada cubre defectos de fabricación en materiales o de mano de obra bajo condiciones de uso doméstico normal, no comercial, del producto y no cubrirá lo siguiente: daños ocasionados durante el transporte, la entrega o la instalación o por uso distinto al previsto para este producto; producidos por modificación o alteración no autorizada del producto; productos a los que se le borraron, desfiguraron o cambiaron de forma alguna los números de serie de fabricación originales, o en los que no s
GARANTÍA LIMITADA (EE.UU.) LIMITACIÓN DE COMPENSACIÓN SU ÚNICA COMPENSACIÓN ES LA REPARACIÓN DEL PRODUCTO, EL REMPLAZO DEL PRODUCTO O LA DEVOLUCIÓN DEL MONTO DE LA COMPRA, SEGÚN DECIDA SAMSUNG, DE ACUERDO A LO ESTIPULADO EN ESTA GARANTÍA LIMITADA.
Aviso regulatorio Aviso de la FCC (Federal Communications Commission) PRECAUCIÓN de la FCC: Todos los cambios y modificaciones que no cuenten con la aprobación expresa de la parte responsable del cumplimiento pueden invalidar la autoridad del usuario para operar el equipo. Contiene módulo transmisor FCC ID: A3LWCM730Q Este dispositivo cumple con la sección 15 de las Normas de la FCC.
Aviso regulatorio Aviso de la IC Contiene módulo de transmisor IC: 649E-WCM730Q El término “IC” antes del número de certificación de radio solo significa que cumple con las especificaciones técnicas de la Industria de Canadá. El funcionamiento se encuentra sujeto a las siguientes dos condiciones: (1) Este aparato no puede causar interferencia dañina, y (2) este aparato debe aceptar la recepción de cualquier interferencia, incluidas aquellas que puedan causar un funcionamiento indeseado.
Notas Untitled-3 91 2018-08-27 5:21:01
Contacte a SAMSUNG WORLD WIDE Si tiene preguntas o comentarios relacionados con los productos Samsung, póngase en contacto con el Servicio de Atención al Cliente de SAMSUNG. País U.S.A CANADA Centro de contacto 1-800-SAMSUNG (726-7864) 1-844-SAM-PAYS (726-7297) Sitio web www.samsung.com/us/support 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) 1-844-SAM-PAYS (726-7297) www.samsung.