Owner's manual
Table Of Contents
- T-TYPE_RF9000JC_DA68-04023A-00_EN
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Additional tips for proper usage
- Instructions about the WEEE
- Installation
- Operations
- Maintenance
- Troubleshooting
- Safety information
- T-TYPE_RF9000JC_DA68-04023A-00_FR
- Consignes de sécurité
- Ce que vous devez savoir concernant les consignes de sécurité
- Consignes et symboles de sécurité importants :
- Mesures importantes de sécurité
- Symboles d'avertissement importants concernant le transport et le lieu d'installation de l'appareil
- Avertissements importants concernant l'installation
- Consignes d'installation
- Avertissements importants concernant l'utilisation
- Consignes d'utilisation
- Consignes de nettoyage
- Avertissements importants concernant la mise au rebut
- Conseils complémentaires pour une utilisation appropriée
- Instructions concernant la règlementation DEEE
- Installation
- Opérations
- Maintenance
- Dépannage
- Consignes de sécurité
- T-TYPE_RF9000JC_DA68-04023A-00_AR
English 41
Installation
To correct the door gap
Door gaps can be corrected using the
gap bolt on the top right corner of the
refrigerator.
1. With the door closed, use a Phillips
screwdriver to remove 3 screws on the
top cover with the wire connectors.
2. Use a 4 mm Allen spanner (not
provided) to correct the door gap
between two doors.
- To widen the gap, turn the gap bolt
clockwise.
- To narrow the gap, turn the gap bolt
counter clockwise.
3. When complete, reinsert the top cover.
CAUTION
The electrical connectors must be intact during this process. Use caution not to tangle the
connector wires or peel off the coating.
Untitled-10 41 2020-01-09 PM 4:43:50