Owner's manual

English 49
Operations
04 Door Alarm / °C  °F (3 sec)
Door Alarm
You can set the alarm for a reminder. If the door is left open for more
than 2 minutes, the alarm will sound with the Alarm indicator blinking.
You can toggle to enable and disable the alarm by pressing Door
Alarm. The alarm is enabled by factory default.
°C  °F
(applicable
models only)
The Door Alarm button can be used to switch the temperature scale
between Celsius and Fahrenheit.
To switch the temperature scale, press and hold Door Alarm for
3 seconds to change the current temperature scale.
05 Control Lock (3 sec)
Control Lock
To prevent accidental manipulation, press and hold Control Lock for 3
seconds. All controls will be disabled with the indicator ( ) on.
To deactivate, press and hold again for 3 seconds. The controls will be
enabled as normal.
Device
authentication
When connecting the refrigerator to Samsung Smart Home App or
Samsung smart devices such as Samsung Smart TVs, follow the app's
or device's onscreen instructions and press and hold Control Lock for
5 seconds. The temperature panel displays "on" for 5 seconds before
proceeding with the authentication procedure. Note that the Control
Lock function will be not affected by this authentication.
06 Lighting
Lighting
By default, the dispenser lamp turns on only when the dispenser
is used. To keep the dispenser lamp turning on, press Lighting. The
lighting indicator also turns on. To turn the lamp off, press Lighting
again.
Untitled-10 49 2020-01-09 PM 4:43:52