Owner's manual
Table Of Contents
- T-TYPE_RF9000JC_DA68-04023A-00_EN
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Additional tips for proper usage
- Instructions about the WEEE
- Installation
- Operations
- Maintenance
- Troubleshooting
- Safety information
- T-TYPE_RF9000JC_DA68-04023A-00_FR
- Consignes de sécurité
- Ce que vous devez savoir concernant les consignes de sécurité
- Consignes et symboles de sécurité importants :
- Mesures importantes de sécurité
- Symboles d'avertissement importants concernant le transport et le lieu d'installation de l'appareil
- Avertissements importants concernant l'installation
- Consignes d'installation
- Avertissements importants concernant l'utilisation
- Consignes d'utilisation
- Consignes de nettoyage
- Avertissements importants concernant la mise au rebut
- Conseils complémentaires pour une utilisation appropriée
- Instructions concernant la règlementation DEEE
- Installation
- Opérations
- Maintenance
- Dépannage
- Consignes de sécurité
- T-TYPE_RF9000JC_DA68-04023A-00_AR
Operations
English56
Operations
• When reinserting the ice maker tray, make sure that the tray is properly centered at
the entrance. Otherwise, the tray may be stuck.
Ice Maker Off
If you press Ice Maker to turn the ice maker off, make sure to remove all ice cubes from
the ice bucket. Remaining ice cubes may clump together, making it difcult to remove
them.
To remove the ice bucket, see the Ice bucket (applicable models only) section on page 60.
NOTE
Removal of the ice bucket does not affect the thermal and mechanical performance of the
refrigerator.
Water clouding
Water supplied to the refrigerator ows through a core alkaline lter of any kind. During
this ltering process, the water that has owed through the lter increases in the water
pressure and becomes saturated with oxygen and nitrogen. This causes the water to look
misty or cloudy temporarily when dispensed. This is normal and the water will look clear
after a few seconds.
Untitled-10 56 2020-01-09 PM 4:43:53