Owner's manual

English 57
Operations
Ice cube tray (applicable models only)
1. Remove the cover from the ice cube
tray.
2. Fill the tray with water up to the
maximum level marked on the inner
rear of the tray.
3. Close the ice tray cover. To remove the
ice, hold both ends of the ice tray and
gently twist it.
NOTE
The ice making time depends on your
temperature settings.
CAUTION
• Use only potable water.
• Do not use the ice storage box specically for making ice. The box may break.
• Make sure the ice storage box is in place under the ice cube tray.
• The ice storage box has a drain hole at the bottom.
- Do not store ice in the box in ambient temperatures. The ice melts and runs out.
- In case of a power failure, the ice melts into water and runs out. After the power
recovery, the water may freeze back and cause the box to break. To prevent
damage to the box, remove and empty the box after the power failure.
Untitled-10 57 2020-01-09 PM 4:43:53