מדריך למשתמש

setting up _11
01 SETTING UP
Lift the door straight up to remove.4.
Remove the screw (5. 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
( 9 ) attached to the lower left and right door
hinges with an allen wrench. Remove the lower
left and right door hinges ( 10 ).
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its fi nal location, assemble parts in
reverse order.
The Water Line must be fully Inserted to the 1.
center of transparent coupler to prevent water
leakage from the dispenser.
Insert2.
the clip in the install pack and check that it
holds the line fi rmly.
DISASSEMBLE THE FLEX DOOR
Take out the upper drawer by lifting it up.1.
Take out the lower basket ( 2. 1 ) by lifting the
basket up from the rail system.
Press the fi xing hook of rail system. 3.
After holding and pulling out the top of Freezer 4.
Door, remove it at the rail system.
Make sure there is no scratch at the end of
Sliding Rail by being dented from the fl oor.
CAUTION
Allen wrench
Allen wrench
10
8
9
1
Center of transparent
Center of transparent
coupler
coupler
clip A
clip A
(6.35 mm)
(6.35 mm)
DA68-02615D(0.0).indb 11DA68-02615D(0.0).indb 11 2012.7.11 8:16:17 PM2012.7.11 8:16:17 PM