Installation Sheet

Operations
English42
Operations
04 Ice Maker / Filter Reset (3 sec)
Ice Maker
Press Ice Maker to turn the ice maker on or off.
The ice maker has 2 indicators ( /
) to indicate its operating status.
• When the ice maker operates, the corresponding indicator (
) turns on.
• When the ice maker is turned off, the corresponding
indicator ( ) turns on. In this case, ice making
is disabled even if you press the Cubed or Crushed Ice
buttons on the dispenser panel. To enable ice making, you
must turn the ice maker on.
NOTE
If the fridge part ice maker is turned off, it will turn on if you
press and hold the ice lever for more than 5 seconds.
Twin Ice-Maker models only
• When the fridge part ice maker operates, the
corresponding indicator ( ) turns on.
• When the fridge part ice maker is turned off, the
corresponding indicator ( ) turns off.
• When the freezer part ice maker operates, the
corresponding indicator ( ) turns on.
• When the freezer part ice maker is turned off, the
corresponding indicator ( ) turns off.
Filter Reset
After about 6 months (and typically, about 300 gallons
(1200 L) of water), the Filter indicator blinks red for several
seconds when you open the door, reminding you that the
lter needs to be replaced.
When this happens, replace the lter, and then press and hold
Ice Maker for 3 seconds. The lter lifecycle will be reset and
the Filter indicator turns off.
NOTE
• Some regions have relatively large amounts of lime in
their water. This can reduce the lifecycle of the lter. In
these areas, you will have to replace the water lter more
often than specied above.
• If water is not dispensing properly, the water lter is most
likely clogged. Replace the water lter.
Untitled-3 42 2021-06-07  3:24:59