User Manual (ver.00)

English - 12

4. Open the door (more than 90°), lift from the

middle hinge, and then remove the door.

- Due to its design features, you can disassemble

and re-assemble the door only when the

door is open. (The holes in the Door Shaft

and the Door Middle Hinge are deliberately

tilted at speciﬁ c angles so that it is difﬁ cult to

disassemble and re-assemble with the door

closed.)

CAUTION

Place the door, inside facing up, on a non-

scratching surface.

Auto Closing Hinge

Check the direction

Door Middle Hinge

- If the Auto Closing Hinge is aligned to be

vertical as shown in the ﬁ gure, align it to be

parallel by using the Door Middle Hinge. (See

Step 5 on the right for instructions explaining

how to disassemble the Door Middle Hinge.)

CAUTION

Do not use a ﬂ at head screwdriver to align the

Auto close Hinge. It may get damaged. Use the

Door middle Hinge instead.

5. Remove the screw (8) attached to the

lower left and right door hinges with a philips

screwdriver (+).

Remove the 2 hex head bolts (9) attached to

the lower left and right door hinges with an allen

wrench (3/16”).

Remove the lower left and right door hinges

(10).

Allen wrench

(10)

(8)

(9)

DA68-03030A-00.indb 12DA68-03030A-00.indb 12 2014. 3. 19.  9:482014. 3. 19.  9:48