User Manual (ver.00)

English - 13
SETTING UP
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its fi nal location, assemble the parts in
reverse order.
1. The Water Line must be fully inserted into the
center of the transparent coupler (Type A) or the
Guide Lines (Type B) to prevent water leakage
from the dispenser.
2. Insert the clip in the install pack, and then
confi rm that it holds the line fi rmly.
Center of Transparent
Center of Transparent
coupler
coupler
The Guide Lines
The Guide Lines
Dispenser
Dispenser
clip A (1/4”)
clip A (1/4”)
(6.35mm)
(6.35mm)
Type A
Type A
Type B
Type B
clip A (1/4”)
clip A (1/4”)
(6.35mm)
(6.35mm)
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone (1) by lifting it up.
(1)
(1)
2. Take off the cover (2) with the harness using a
fl at head screwdriver (-).
(2)
(2)
3. Press the locking tab and separate the Wire
Connector.
4. Remove 1 hex head bolt from each side with a
socket wrench (10mm).
DA68-03030A-00.indb 13DA68-03030A-00.indb 13 2014. 3. 19.  9:482014. 3. 19.  9:48