User Manual (ver.00)

English - 15

SETTING UP

5. Holding the top of the Freezer Drawer, pull it

out all the way, and then remove it from the rail

system.

CAUTION

Be careful not to scratch or dent the sliding rail by

letting it strike the ﬂ oor.

CAUTION

Make sure that you mount the freezer basket in the

right position when removing / installing the freezer

door. Failing to do so may result in the door not

opening or closing properly.

RE-ASSEMBLING THE FREEZER

DOOR

To reattach the drawer after you have moved

the fridge to its ﬁ nal location, assemble the parts in

reverse order.

ADJUSTING THE LEVEL

Make sure the refrigerator is level so that you can

make ﬁ nal adjustments. Use a level to test if the

refrigerator is level both side to side and back to

front. If the refrigerator is not level, you will not

be able to get the doors perfectly even, which

may cause moisture condensation and increased

energy bills. Below is an example of how to level

the refrigerator if the left side of the refrigerator is

lower than the right side.

How to adjust the level

1. Open the freezer drawer and remove the lower

basket.

2. Insert a ﬂ at-blade screwdriver (-) into a notch on

the left control lever, and then turn it counter-

clockwise to level the refrigerator.

(You turn the lever clockwise to lower the

refrigerator and counterclockwise to raise it.)

ﬂ at-blade screwdriver (-)

Control Lever

DA68-03030A-00.indb 15DA68-03030A-00.indb 15 2014. 3. 19.  9:482014. 3. 19.  9:48