Operating instructions

Iftherefrigeratorisinstalledinanareawithlow
waterpressure(below20psi),youcaninstall
aboosterpumptocompensateforthelow
pressure.
Afteryouhaveconnectedthewaterline,make
surethewaterstoragetankinsidetherefrigerator
isproperlyfilled.Todothis,pressthewater
dispenserleveruntilthewaterrunsfromthewater
outlet.
Waterlineinstallationkitsareavailableat
extracostfromyourdealer.
Werecommendusingawaterline
installationkitthatcontainscoppertubing
and1A"compressionnut.
Connecting to the water supply line
1. First, shut off the main water
supply.
2. Locate the nearest cold water drinking line and
install the pipe clamp and shut off valve.
Cold water line
Pipe clamp
Shut off valve
3. Connect the water line installation kit to the
shut off valve.
Pipe clamp --
Water line installation kit
Connecting the water supply line to
the refrigerator.
There are several items that you need to purchase
to complete this connection.
You may find these items sold as a kit at your local
hardware store.
Use Copper Tubing Use Plastic Tubing
1/4"copper tubing • ¼" plastictubing
1/4"compression nut _ Molded end(Bulb)
(1pc) * ¼" compression nut
Ferrule(2pc) (1pc)
Refrigerator
-- Plastic Tubing
(Assembled)
Nut
(Assembled) __ Compression
Fitting
(Assembled)
Molded
end(Bulb)
(Not supplied)
nut (B) (1/4")
. _, -_ . (Not supplied)
Copper tubing or Plastic tubing (B)
(Not supplied) (Not supplied)
Household water supply line
1. Connect the household water line to the
assembled compression fitting.
If you are using copper tubing, slip the
compression nut ( B ) (not supplied) and
ferrule (not supplied) on the copper tubing (not
supplied) as shown.
If you are using plastic tubing ( B ), insert the
molded end (Bulb) of the plastic tubing ( B )
into the compression fitting.
Z_ Do not use without the molded end (Bulb)
CAUTIONof the plastic tubing ( B ).
2. Tighten the compression nut ( B ) onto the
compression fitting.
Do not over-tighten the compression nut ( B ).
3. Turn the water on and check for any leakage.
If you find water drops or leakage in the
connection areas, turn off the main water
supply. Check the connections and, if
necessary, tighten.
4. Flush 1 gallon of water through the filter
setting up 15