Use and Care Manual

Table Of Contents
Installation
English34
Installation
STEP 5 Adjust the door height and the door gap
Snap rings
The height of the door can be adjusted using the provided
snap rings, which come in 4 different sizes (1 mm,
1.5 mm, 2 mm, and 2.5 mm).
To adjust the height of a door
1. Check the height difference between the
doors, and then lift up and hold the door
with the lower height.
9
2. Insert a suitable-sized snap ring (A)
between the door grommet (B) and the
hinge as shown.
CAUTION
Insert only one snap ring. If you insert two or more snap rings, the rings may slip out or
make a rubbing noise.
Keep the snap rings out of children’s reach and keep them for future use.
Do not raise the door too much. The door may come in contact and damage the top
cover.
Untitled-1 34 2023-05-10()  12:22:39