Product manual

English - 11
SETTING UP
2. Remove the two water lines (White for water
and the other for ice) by pressing the coupler
(1) and pulling the water line (2) away.
CAUTION
1
2
Make sure the color
Make sure the color
of the water lines
of the water lines
match.
match.
CAUTION
When reconnecting the supply hoses, make sure
you connect hoses of the same color together.
2. DISASSEMBLE THE FREEZER DOOR
1. Remove the cover screw using a Phillips
screwdriver (1). Then push the hooks on the
sides using a fl athead screwdriver to loosen the
cover (2). Open the freezer door and lift up the
back part of the cover (3) and then pull the
cover up and towards you to detach it (4).
- Detach the hinge cover with the door open and
then close the door once the hinge cover has
been detached.
1
1
2
2
2
2
3
3
4
4
2. Remove the hinge cover and then disconnect
the electrical wire connector.
3. Flip the clamp (A) up in direction 1 and then
pull it off in direction 2.
A
A
A
A
4. Remove the hinge (B).
B
B
5. Lift up the door and detach it from the
refrigerator.
CAUTION
• Be careful not to damage the electrical wires
when assembling or disassembling the doors.
• Make sure the doors do not fall over and
become damaged while they are detached
from the refrigerator.
DA68-03178A-03.indb 11DA68-03178A-03.indb 11 2015. 1. 26.  11:582015. 1. 26.  11:58