Product manual

English - 23
OPERATING
(10) Filter Icon
Water fi lter usage
This icon lights when you need to change
the fi lter, usually after the refrigerator has
dispensed about 300 gallons of water
(after about 6 months). The icon will blink
red for several seconds when you open or
close the door.
After you replace the water fi lter, touch
and hold the Lighting / Filter Reset (3sec)
button for 3 seconds to reset the water
fi lter life indicator.
- If water is not dispensing or dispensing
slowly, you need to replace the water
fi lter because the water fi lter is clogged.
- Some areas have large amounts of lime
in their water, which causes the water
fi lter to clog more quickly.
If this is the case in your area, you will
need to change the water fi lter more
frequently than every six months.
Cooling Off Mode
- North American (US and Canadian)
Models Only:
Cooling Off mode (also called Shop mode),
is designed for use by retailers when they
are displaying refrigerators on the shop
fl oor.
In Cooling Off mode, the refrigerator’s
fan motor and lights work normally, but
the compressors do not run, and the
refrigerator and freezer do not get cold.
To start Cooling Off mode, touch and hold
the Lighting, the Freezer and the Fridge
buttons for 5 seconds during normal
operation.
The refrigerator chime sounds and the
temperature display fl ashes OFF.
To cancel Cooling Off mode, touch and
hold the Freezer, the Lighting and the
Fridge buttons again for 5 seconds.
CAUTION
If your refrigerator appears to be working, but
it is not cooling, and the Freezer and Fridge
Temperature Indicators are moving, the Fridge is in
Cooling Off mode.
To cancel Cooling Off mode, follow the directions
under Cooling Off Mode below.
DA68-03178A-03.indb 23DA68-03178A-03.indb 23 2015. 1. 26.  11:582015. 1. 26.  11:58