User manual

setting up _11
01 SETTING UP
Detach the Fridge and 25.
the Freezer door gaskets
and then attach them
after rotating them 180˚.
After reversing the doors, make sure
the Fridge and Freezer door gaskets are
properly arranged. If not, there might
be a noise or dew formed which affects
perfomance of the refrigerator.
REVERSING THE DOOR
HANDLE (TYPE A)
Remove 2 screws underneath the Fridge door 1.
and then take off 2 Cap sheets and remove 2
screws on the Freezer door.
Slightly push down the Fridge handle and then 2.
remove it by pulling it toward to you.
Slightly push up the Freezer handle and then
remove it by pulling it toward to you.
Disassemble the door handle carefully. Hooks
inside of the door handles can break easily.
REVERSING THE
REFRIGERATOR DOOR
(CONT’D)
Carefully put the Fridge door back on.21.
Then tighten 3 bolts to assemble the Top hinge.
You must reverse the Type B door handle •
before putting the Fridge door back.
Please refer to page 12.
For Door handle Type A, make sure to •
switch the door handle after reversing the
door.
Connect wires and then assemble the Wire cover 22.
on the top of the Fridge door.
Change the position of the Top hinge cap. 23.
Connect the wire under the Top cover and put
the Top cover back to its original position.
Tighten 4 screws back 24.
to its place.
Top hinge cap
CAUTION
DA99-02116A(0.7)-EN.indd 11DA99-02116A(0.7)-EN.indd 11 2012.10.8 9:24:23 AM2012.10.8 9:24:23 AM
Downloaded from Fridge-Manual.com Manuals