User manual

setting up _09
01 SETTING UP
Switch the side of bottom hinge cap and then 10.
attach the Front leg cover on the bottom of the
refrigerator.
Switch the side of the Middle hinge cap,11.
Screw cap and a Screw from left to the right side.
Remove the screw on the bottom right side of 12.
the Freezer door.
Switch the Door stopper and the Hinge grommet
from the right to the left.
Switch the Hinge grommet and the Grommet cap on 13.
the top of the Freezer door.
REVERSING THE
REFRIGERATOR DOOR
(CONT’D)
Separate the Front leg cover after removing 2 6.
screws.
Unscrew 2 bolts tightening the Bottom hinge 7.
and also unscrew a bolt on the left side by the
front leg where removed Bottom hinge will be
attached.
Before removing the Bottom hinge, slightly
turn the front legs clockwise for easier
disassembling and assembling.
Switch the position of the Bottom hinge shaft. 8.
Remove the screw on the Auto guide and remove
the Bottom hinge shaft with 11mm wrench.
Attach the Bottom hinge shaft on the left and put
the reversed Auto Guide back.
Attach the Bottom hinge on the bottom left side 9.
of the refrigerator where a bolt was previously
removed in step 8.
Screw remaining bolt on the bottom right side of
the refrigerator for the future usage.
Screw
Front leg cover
10mm
10mm
Bottom hinge shaft
Auto guide
Screw
Bottom hinge
cap
Screw cap
Middle hinge cap
Screw
Screw
Hinge grommet
Door stopper
Hinge grommet
Grommet cap
DA99-02116A(0.7)-EN.indd 09DA99-02116A(0.7)-EN.indd 09 2012.10.8 9:24:22 AM2012.10.8 9:24:22 AM
Downloaded from Fridge-Manual.com Manuals