SIDEBYSIDE REFRIGERATOR GREEN OWNER'S MANUAL ANDINSTALLATION CONTENTS SAFETY WARNING .............................................................................. 2 OPERATING INSTRUCTIONS ........................................................ 4 SETTING UP THE REFRIGERATOR ......................................................... 4 MAJOR FEATURES ..................................................................................... 4 CONTROL PANEL.......................................................
/k WARNING • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because these following operating instructions cover various models, the characteristics of your refrigerator may differ slightly from those described in this manual • The appliance is not intended for use by children or infirm persons without adult supervision. • Children should be supervised to ensure that they do not play with the appliance.
///_ CAUTIONS Q Do not overfillthe refrigeratorwith food. • Whenyou open the door,an item may fall out and cause personalinjuryor materialdamage. Do notput bottlesor glasscontainersin the freezer. • Whenthe contentsfreeze,the glass may break and causepersonalinjury. If the wall socketis loose,do not insertthe power plug. • There is a risk of electricshockor fire. ® ,j O Do notdisconnectthe powercordbypullingon it. • Damageto the cordmaycausea short-circuit,fire and/orelectricshock.
Onceyou have performedthefollowingsteps,your refrigeratorshouldbefully operational.If not,check the powersupplyand electricitysource.If you haveanyquestions,contactyourSAMSUNG servicecenter. Place the refigerator in an appropriate location with reasonable clearance between the wall and the refigerator. (refer to installation instructions in this mannal) Set the temperature control to the coldest temperature and wait for an hour.The freezer should get slightly chilled and the motor should run smoothly.
Basic Model Dispenser Model (Child Lock) Ice Water Dispenser Model (Moisture Control) FRIDGETEMP.BUTTON Toset the fridge temperature, pressthe buttonrepeatedlyto changethe set temperaturein sequencebetween7°C and 1°C. changethe set temperaturein sequencebetween -14°C and-25°C POWER COOL BUTTON Speeds up the cooling Speeds up the freezing process POWER in the freeze.
Opitonal Basic IV Power Freeze Power Cool Fridge Temp, Dispenser Model (With CoolSelect Zone TM) Dispenser Model (With CoolSelect Zone TM)
\ Freezer Temp. indicates the current freezer temperature. Fridge Temp. indicates the current refrigerator temperature. Quick Cool,Thaw, and Select show the status of the CooISelect ZoneTMDrawer Oul f • This light is on when you press the Powe! Cool button. Press the button to quickly return the refrigerator to the set temperature. "_ ) e, Crushed Ice and Ice Off \ / =_--_ Ice Type _ Crushed _ _ Ice Off • Press the Ice Type button in seqence to choose Cubed Ice, Crushed Ice or Ice Off to stop ma
Freezer Refrigerator • The freezer temperature can be set between -14°C and -25°C. • The refrigerator temperature can be set between 7°C and 1°C. • Press the Freezer Temp. button repeatedly until the desired set temperature is shown in the temperature display. • The temperature display changes in sequence between -14°C and -25°C. When the display reaches 14°C, it returns to -25°C. • After five seconds, the display reverts to the actual freezer temperature.
Freezer Light Xtra SpaceTM--Door Bin ---------------------- Light---.---Ice Chute ..------LightSwitch _- .........,..............Ice Maker ------ - ----- Glass Shelf---- Pockets Plastic Drawers-------------------- Front Leg Cover -- Dispenser Model Basic Model Refrigerator Water Filter (optional) ....................... Light (upper) Spill-proof glass Shelf -------Light Switch Foldable Shelf (optional)__....................
Basic Model FROZEN FOOD STORAGE Xtra Space ............. Dispenser Model IN FREEZER TM • Can be used for frozen foods such as pizza, pasta, burri tos, and fajitas. • In order to prevent odor penetration to the ice, stored food should be wrapped securely. Tempered Glass Shelf • Can be used to store all types of frozen food. Door Bin • Can be used for small packages of frozen food. .... Plastics Drawer • Can be used to store meat and dry foods.
CHILLED FOOD STORAGE IN REFRIGERATOR Tempered Spill Proof Glass Shelf • Can be used to store all types of chilled food. • Safe and hard to break resistant. • Circular marks on the glass surface are a normal phenomenon. Chilled Bin or CoolSelect Zone TM Drawer (optional) • Helps to preserve the taste of food and prolongs its freshness. Use to store cheese, meat, poultry, fish or any other foods used quickly. Fruit & Vegetable Drawer (Upper and Lower) • Is used to store fruits and vegetables.
"Select" button (Optional) Soft Freeze • When "Soft Freeze" is chosen, the temperature on the digtal panel displays -5°C regardless of the set temperature of the refrigerator. • "Soft-Freeze" temperature helps keep meats and fishes fresh longer. • Can cut meat easily without drips. Chill • When "Chill" is chosen, the temperature of the CoolSelect Zone TM Drawer is kept at -1°C regardless of the set refrigerator temperature. • "Chill" temperature helps keep meat or fish fresh longer.
"Quick Cool" button • You can use the Quick Cool feature with the CoolSelect Zone TM. • "Quick Cool" allows 1-3 canned beverages to cool within 60 min. • To cancel this option, press the "Quick Cool" button again. CoolSelect Zone TM returns to the previous temperature. 0 Quick Cool N / • When "Quick Cool" ends, it returns to the "Cool" temperature setting. @ NOTE Depending on the beverages;the Cool:down time may vary.
Ice maker bucket (optional) • Remove the bucket by lifting up and pulling out. Glass shelf • Pull the shelf out as far as it goes. Then lift it up and remove it. Front leg cover • Open the freezer and refrigerator doors, remove three screws and detach the cover. Door bin • Hold the door bin with both hands and then lift it up. • To reassemble the cover leg front, put it back to original position and tighten the three screws.
ToopentheBeverageStation TM, holdtheBeverage Station TM door handle andpull itdownward. • The BeverageStationTM is convenient and reduces energy consumption, becauseyou do not need to open the refrigerator door to access stored beveragesand snacks. • It is recommended thatyou use the BeverageStationTM for storing most frequently needed foods ,,The door of the Beveragestation Shouldneverbe removed.The Beveragestation CannOtfunction if its door is missing.
Deodorizer • Removethecoverwith a flat bladescrewdriveras shown. • Take out the cartridge from the cover and soak it in clean, warm water at least than 4 hrs.Completely dry out the cartridge with sunlight for at least 8 hrs in an open area. _ Cartridge • Repeat this process once or twice a year. NOTE • If it is dried in a confined area, odor may be spread to that area. .................................................... • Keepthe children away from ye!!ow water, they may drink water.................
_ INTERIOR LIGHT INTHE FREEZER(Dispenser Model) Use a screwdriver to remove the light cover (1_). To replace freezer _ and refrigerator hange the bulb with a new one (@) light bulbs (Bulb size Et4), please Reattach the light cover contact SAMSUNG dealer, NOTE \:-_ INTERIORLIGHTINTHE FREEZER(Basic Model) Pull out the screw cap _ and remove the screw. _ Push the lamp cover in the direction of the arrows. After changing the bulb, reattach the light cover and screw it in again.
__ Checking the Dimensions of your Entrance Door • Check the dimensions through it. NOTE _ of your entrance door to determine whether the refrigerator • When refrigerator passes in door and depth or width of refrigerator refrigerator doors. can pass is bigger, removes Selecting the Location for the Refrigerator • Select a location with easy access to the water supply. • Select a location with enough space for the refrigerator. • Select a location without direct exposure to sunlight.
-\-_ Cover (Optional) Open the freezer and refrigerator doors, and then take off the front leg cover assembly by turning the three screws counter-clockwise. FRONTLEG COVER _ Separating the water supply line from the refrigerator (Optional) 1) Remove the screw from clamp ((®). 2) Remove the water tube by pressing the coupler (@) and pulling the water tube (d_) away. E I WARNING DOnot Cutthe watertube but Separateit from the Coupler.
@ • Lift the door Straight upl NOTE • Be careful not to pinch the water tubing and wire harness On the door. • Place doors on a protected surface. Removing the Freezer Door 1) With the door closed, remove the upper hinge cover (®) using a screwdriver, and then discon- nect the wires (@). 2) Remove hinge screws ((_) and ground screw (®) counter-clockwise, hinge (®) along the arrow ((-¢).Take care when removing and take off the upper the door to ensure that it does not fall on you.
\_-_Removing the Refrigerator Door 1) With the door closed, remove the upper hinge cover (d_) using a screwdriver, and then discon- nect the wires (@). i2 • 1 • @ J I 2) Remove hinge screws (_) and ground screw (®) counter-clockwise, and take off the upper hinge (®) in the direction of the arrow (_-6h). Take care when removing the door to ensure that it does not fall on you. 3) Remove the door from the lower hinge (®) by 4) Remove the lower hinge (_gh)from the bracket lifting the door (_). \ lo
Reattaching the Freezer Door 1) Insert the lower hinge (®) in the bracket lower hinge (_). 2) Reattach the freezer door by inserting the hose (_) in the lower side of the door into the hole in the lower hinge (®) and pulling the hose down. , -@ ! iI j- Y 3) Insert the upper hinge shaft (®) into the hole (®). After levelling between the upper hinge hole (®) and the hole of the cabinet (_)). Reattach bolts ((9)) and screw (40))in a clockwise direction. 4) Connect the wires.
Reattaching the Refrigerator Door 1) Insert the lower hinge (®) in the bracket lower hinge (_). 2) Place the hole in the refrigerator door (_) over the lower hinge (®). J f 3) Insert the upper hinge shaft (®) into the hole (®). After levelling between the upper hinge hole (®) and the hole of the cabinet (_). Reattach hinge screws (_gh)and screw (_0_)in the clockwise direction. ,,,,, 4) Connect the wires.
\_t_ Reattaching the Water Tube (Optional) 1) While pressing the front face of coupler (Q), insert the water line (d_) in the coupler. 2) Tighten the screw on the clamp ((_). '_ Reattaching the Front Leg Cover (Optional) Put on the front leg cover by turning the three screws clockwise, as shown in the figure.
Please level the refrigerator first. The doors will be uneven if the refrigerator is not level. Insert a straight screwdriver Case 1) Freezer door is lower than (-) (d_) into a slot of the control lever (@), turn it clockwise and level the that of the refrigerator refrigerator. F: i i (_ DRIVER(-) Case 2) Freezer door is higher than Insert a straight screwdriver that of the refrigerator (-) (d_) into a slot of the control lever (@), turn it clockwise and level the refrigerator.
Making small adjustments between If the door of the freezer is lower than that of doors. If the door of freezer is higher than that of the the refrigerator. refrigerator. i-! iiiiiii _=:_._ii i _s 4i iiiliii"' i[--_i Ilii!!ilili i _,djustment part k. Adjustment part Please open the doors and adjust the doors as follows: 1) Release the nut (d)) on the lower hinge until the upper end of the bolt (@).
1)Inordertooperate theicemaker properly, waterpressure of1.4- 10kgf/cm 2isrequired. Inthisrangea 100ccpapercupcanbefilledin10seconds. 2)Thewaterfilterremoves particles. Itdoesnotsterilize ordestroy anymicro-organisms. 3)Iftherefrigerator isinstalled inanareawithlowwaterpressure (below1.4kgf/cm2), youshouldinstall a booster pumptocompensate forthelowpressure. 4)Ensure thewaterstorage tankinsidetherefrigerator ispreperly filledinitially. Pushthewaterdis penserleveruntilthewaterrunsfromtheoutlet.
For Interior Model (Case 1) "_ Connecting to water supply line 1. Cold Water - Shut off the main water supply line and turn the Ice maker to the off position. 3.Copper - Locate the nearest cold drinking water line. - Follow the instructions 6 Connect line Nut &Compression Sleeve Off Valve 7.Packing kit. (or Plastic) 4.Compression 6.Shut in the ice maker installation line 2. Pipe Clamp. Nut.
Connect the water line to the refrigerator. JI - Remove the compressor cover of the refrigerator. CONNECTION NUT WATER - Connect the water line to the valve, as shown in the figure. - When connected, check if there is any leakage. If any, repeat the connection. - Reattach the compressor cover of the refrigerator. REFRIGERATOR Secure the water line. - Using clip "A", fix the water line to the wallor (the back of refrigerator).
For Exterior model Connect to the water supply line Connect the water pipe with coupler and tap. The water line must be connected to the cold water pipe. I If it is connected to the hot water pipe, it may cause the puri- I [ tier to malfunction. - Close the main water tap. - Connect coupler "A" to the tap. - Every join should be protected with sealing tape. COUPLER "A" If the coupler does no t fit on the curren t tap, go the nearest authorised service dealer and purchase the right couplers fittings.
/ / Attachthepurifierlockstations. / - Holdthepurifier lockstations intheappropriate position (under thesinkforexample) andfixittightlyintoplace wheretoscrew. / / TWO PURIFIER / ! / L_OCK_ / / WATER TUBE J ,I Secure the purifier in position. - Fix the purifier in position, as shown in the figure PURIFIER on the right. TIGHTENING ___ BAND Connect the water line to the refrigerator. J J / / J ,/ J J j X / i I" / /7 / i / / _.
Remove any residual matter inside the water supply line 1) Turn on the main water supply & shut-off valve of the water --..,..,.. supply line. 2) Run water through the dispenser until the water runs clear ICE - --WATER (6-7 minutes). This will clean the water supply system and clear air from the lines. 3) Additional flushing may be required in some households. 4) Open the refrigerator door and check if water leaks around the water filter.
The refrigerator does not work at all or it does not chill sufficiently • Check that the power plug is properly connected. Ice is not dispensed • Is the temperature control on the display panel set to the correct temperature? Try seting it to a lower temperature.
f
Ambient Room Temperature Limits This appliance is designed to operate at the ambient class marked on the rating plate.