User Manual

English 45
Maintenance
Handle and care
Auto Icemaker
1
2
To remove the ice from the Auto Icemaker,
pull the ice bucket.
1. Grasp Bucket with both hands at top
bucket and pull toward you.
2. Then lift Bucket up and out to remove.
To re install-Insert the tabs on the
bucket into the grooves () on the door,
then push the back toward the door to
lock in place.
NOTE
• Not using ice for long period, remove
the remaining ice and empty the ice
bucket.
• The rst batch of ice cubes may be small
due to air in the pipe after connection.
Any air will be purged during normal
use.
CAUTION
• Do not apply excessive force to the bucket cover. The cover may break.
• Do not close the door hard. Water may spill over the ice maker.
• To prevent injury, make sure to clean up any ice or water that has fallen on the oor.
• To prevent accidents or injury, do not let children play with the ice maker.
NOTE
• Any sound from the ice maker is normal, which outputs during the ice making process.
• While the door is open, the ice maker operates.
• If the Ice Maker On indicator blinks, remove and reinsert the ice bucket. Make sure it is
reinserted properly.
Maintenance
Untitled-1 45 2021-01-21  11:36:11