Installation Guide 2021.09.14

English 11
Installation
A
B
15. Remove the cap at the end of the white
water line and slide the exible tube (A)
to the white water line. Then, connect
the white water line to the bottom of
the valve (B) (with a blue water line).
NOTE
Dispose the cap immediately after
removing it from the water line. Do not
play with the cap or put it in your mouth.
A
NOTE
There is line (A) marked on the white water
line. Make sure to insert the water line up
to the marked line when you connect it to
the valve.
A
16. Connect the valve connector (A) to the
port in the compressor compartment.
Make sure the connector is fully
inserted. (You should hear a clicking
sound.)
A
17. Secure the valve bracket (A) to the
refrigerator as shown in the gure.
NOTE
Make sure the valve or the bracket does
not come in contact with the surrounding
parts (especially the refrigerant pipe) in the
compressor compartment.
Untitled-1 11 2021-09-06  10:47:01