Installation Guide 2021.09.14

Installation
English12
Installation
NOTE
• Make sure to arrange the water lines as
shown in the gures.
• Make sure the water lines are not
pinched or kinked during the process.
• Make sure the exible tube is securely
xed to protect the bending part of the
water line.
A
18. Reattach the compressor compartment
cover (A).
NOTE
Make sure the water lines are not pinched
or kinked during the process.
A
19. Use the 3 xers (A) to secure the water
lines.
NOTE
• Do not remove the cap plugged in at
the end of the blue water line until you
connect the blue water line to a water
source.
• If the water hose is loose, use a tape
to rmly attach it to the back of the
refrigerator.
CAUTION
Do not mount the water lter on any part
of the refrigerator. This may damage the
refrigerator.
Untitled-1 12 2021-09-06  10:47:02