Installation Guide 2021.09.14

English 9
Installation
A
A
8. Remove the screws fastening the cover
(A) on the inner upper corner of the
freezer. Then, remove the cover (A) by
pulling it to the front.
A
9. Connect the wire harness (A) of the
white water line (which you have
inserted through the water inlet on
the top of the refrigerator) to the right
socket in the freezer. Make sure the
connector is fully inserted. (You should
hear a clicking sound.)
A
10. Connect the wire harness (A) of the ice
maker to the left socket in the freezer.
Make sure the connector is fully inserted
to prevent system failure.
Untitled-1 9 2021-09-06  10:47:01