User manual S19E200BR S19E200BW S19E200NW S19E200NY S19E450BR S19E450BW S19E450MR S19E450MW S22E200B S22E200BW S22E200N S22E200NY S22E450B S22E450BW S22E450D S22E450DW S22E450M S22E450MW S23E200B S23E450B S24E200BL S24E450B S24E450BL S24E450D S24E450DL S24E450M S24E650BW S27E450B S27E450D The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS 8 Copyright 8 Icons used in this manual 9 Cleaning 10 Securing the Installation Space 10 Precautions for storage 11 Safety Precautions 11 12 13 15 Symbols Electricity and Safety Installation and Safety Operation and Safety 19 Correct posture to use the product 20 Checking the Components 20 Checking the Components 22 Parts 22 24 26 28 30 31 32 33 34 Frontal Buttons (SE200 Series) Frontal Buttons (S**E450B*, S**E650B*) Frontal B
Table Of Contents CONNECTING AND USING A SOURCE DEVICE SCREEN SETUP 45 Before Connecting 45 Pre-connection Checkpoints 46 Connecting and Using a PC 46 51 55 56 Connecting to a PC Connecting the Power Driver Installation Setting Optimum Resolution 57 Brightness 57 Configuring Brightness 58 Contrast 58 Configuring Contrast 59 Sharpness 59 Configuring Sharpness 60 Eye Saver Mode 60 Configuring Eye Saver Mode 61 Game Mode 61 Configuring Game Mode 62 SAMSUNG MAGIC Bright 62 Conf
Table Of Contents CONFIGURING TINT RESIZING OR RELOCATING THE SCREEN SETUP AND RESET 69 H-Position & V-Position 69 Configuring H-Position & V-Position 70 Coarse 70 Adjusting Coarse 71 Fine 71 Adjusting Fine 72 Red 72 Configuring Red 73 Green 73 Configuring Green 74 Blue 74 Configuring Blue 75 Color Tone 75 Configuring the Color Tone Settings 76 Gamma 76 Configuring Gamma 77 Language 77 Changing the Language 78 Menu H-Position & Menu V-Position 78 Configuring Menu H
Table Of Contents INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE 82 Smart Eco Saving 82 Configuring Smart Eco Saving 83 Off Timer (S19E200NW / S19E200NY / S22E200N /S22E200NY) 83 84 Configuring Off Timer Configuring Turn Off After 85 Off Timer Plus (Except S19E200NW / S19E200NY / S22E200N / S22E200NY) 85 87 Configuring Off Timer Configuring Eco Timer 89 PC/AV Mode (Except S19E200NW / S19E200NY / S22E200N / S22E200NY) 89 Configuring PC/AV Mode 91 Key Repeat Time 91 Configuring Key
Table Of Contents TROUBLESHOOTING GUIDE SPECIFICATIONS 98 Requirements Before Contacting Samsung Customer Service Center 98 98 98 Testing the Product Checking the Resolution and Frequency Check the following.
Table Of Contents APPENDIX 140 Responsibility for the Pay Service (Cost to Customers) 140 140 140 Not a product defect A Product damage caused by customer's fault Others 142 Correct Disposal 142 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 142 Extended warranty 143 Terminology INDEX Table Of Contents 7
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. SE200 Series 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) SE450, SE650 Series 3.93 inches (10 cm) 3.93 inches (10 cm) 3.
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable. ! An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. Otherwise, the cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Before Using the Product Looking at the screen too close for an extended period of time can deteriorate your eyesight. ! Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. Adjust the angle so light does not reflect on the screen. Keep your forearms perpendicular to your upper arms and level with the back of your hands. Keep your elbows at about a right angle.
1 1.1 Preparations Checking the Components 1.1.1 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The pictures may look different from the actual components.
1 Preparations USB cable (optional) Stand base For SE200 Series Model (optional) Stand base For SE450 Series Model, For SE650 Series Model (optional) Stand base For SE450 Series Model (Applicable to the stand models that have USB ports only.) Stand neck For SE200 Series Model (optional) Stand neck For SE450 Series Model, For SE650 Series Model (optional) (optional) Components may vary depending on the country.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons (SE200 Series) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide MENU EYE SAVER SOURCE AUTO MENU EYE SAVER SOURCE AUTO Icons Description MENU Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Use this button to control the brightness, contrast and sharpness of the screen. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only.
1 Preparations 1.2.2 Frontal Buttons (S**E450B*, S**E650B*) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide MENU EYE SAVER SOURCE AUTO Icons Description MENU Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only. Press the [AUTO] button to automatically adjust the screen settings.
1 Preparations 1.2.3 Frontal Buttons (S**E450M*) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide MENU EYE SAVER SOURCE AUTO Icons Description MENU Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only. Press the [AUTO] button to automatically adjust the screen settings.
1 Preparations 1.2.4 Frontal Buttons (S**E450D*) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide MENU EYE SAVER SOURCE AUTO Icons Description MENU Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI/DisplayPort). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only. Press the [AUTO] button to automatically adjust the screen settings.
1 Preparations 1.2.5 Reverse Side (SE200 Series) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DVI IN DVI IN RGB IN POWER IN POWER IN RGB IN Port Description Connect to a PC using the DVI cable. The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only. Connect to a PC using the D-SUB cable. Connect to an external device.
1 Preparations 1.2.6 Reverse Side (S**E450B*, S**E650B*) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DVI IN DVI IN RGB IN POWER IN POWER IN RGB IN Port Description Connect to a PC using the DVI cable. The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only. Connect to a PC using the D-SUB cable. Connect to an external device.
1 Preparations 1.2.7 Reverse Side (S**E450M*) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DVI IN RGB IN POWER IN AUDIO IN/OUT AUDIO IN/OUT DVI IN RGB IN POWER IN OUT IN Port Description Connect to a PC using the DVI cable. The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only. Connect to a PC using the D-SUB cable. Connect to an audio output device such as headphones.
1 Preparations 1.2.8 Reverse Side ( S**E450D*) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DP IN DP IN DP IN DVI IN DVI IN RGB IN RGB IN DVI IN RGB IN POWER IN POWER IN POWER IN Port DVI IN DP IN POWER IN RGB IN Description Connect to a PC using a DP cable. Connect to a PC using the DVI cable. The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.
1 Preparations 1.2.9 Right Side View (S**E450D*) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect to a USB device. Applicable to the stand models that have USB ports only.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand (SE200 Series) Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the Stand Connector into the Stand in the direction shown by the figure. Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
1 Preparations 1.3.2 Attaching the Stand (SE450, SE650 Series) Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Do not remove the fixing pin until Insert the stand base into the you are finished attaching the stand in the direction of the stand. arrow. Fasten the screw tightly (using a screwdriver or coin) into the bottom of the stand base. After installing the stand, place the product upright.
1 Preparations 1.3.3 Removing the Stand (SE200 Series) The exterior may differ depending on the product. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards. While holding the stand neck with one hand, pound the other fisted hand down onto the top of the stand base in the direction of the arrow to detach the stand base. Turn the connecting screw at the bottom of the stand base to separate it.
1 Preparations 1.3.4 Adjusting the Product Tilt (SE200 Series) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1° (- 2°/+ 1°) - 20° (0°/+ 2°) You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully.
1 Preparations 1.3.5 Adjusting the Product Tilt and Height (SE450, SE650 Series) The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 19"-24" 27" 4 19"-22" (without a USB port) 23"-27" / 21.5", 22" (with a USB port) 0 (± 5 mm) 100 mm (± 5 mm) To adjust the height, remove the fixing pin. The monitor tilt and height can be adjusted. Hold the top center of the product and adjust the height carefully.
1 Preparations 1.3.6 Rotating the Monitor (SE450, SE650 Series) You can rotate your monitor as shown below. 1 2 3 4 5 6 Be sure to fully extend the stand before rotating the monitor. If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the floor and get damaged. Do not rotate the monitor counterclockwise. The monitor may get damaged.
1 Preparations 1.3.7 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. SE200 Series Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Hold the main body of the product with your hand as shown by the figure. Pull the stand in the direction of the arrow as shown in the figure to separate it.
1 Preparations Installing a Wall-mount Kit or Desktop Stand (SE200 Series) 2 1 A 3 4 B A Attach the wall-mount kit or desktop stand here B Bracket (sold separately) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. Notes Using a screw longer than the standard length can damage the internal components of the product.
1 Preparations Installing a Wall-mount Kit or Desktop Stand (SE450, SE650 Series) 2 1 A 3 4 BB A Attach the wall-mount kit or desktop stand here B Bracket (sold separately) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. Notes Using a screw longer than the standard length can damage the internal components of the product.
1 Preparations 1.3.8 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. SE200 Series DVI IN RGB IN POWER IN SE450, SE650 Series The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
2 2.1 Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. Check the types of ports at the back of the product you want to connect.
2 2.2 Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. The exterior may differ depending on the product. Connection Using the D-SUB Cable (Analog Type) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable.
2 Connecting and Using a Source Device SE450, SE650 Series RGB IN DVI IN RGB A B A B IN RGB IN DVI IN 1 RGB IN Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC. Connect A to the [RGB IN] port on the product, then connect B to the RGB port on the computer. 2 Press [ ] to change the input source to Analog. This function is not available for products with an Analog interface only.
2 Connecting and Using a Source Device Connection Using the DVI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. SE200 Series DVI IN A B A B A B A B RGB IN DVI IN DVI IN RGB IN DVI IN SE450, SE650 Series DVI IN RGB DVI IN IN DVI IN RGB DVI IN 1 IN Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC.
2 Connecting and Using a Source Device Connection Using the DVI-HDMI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. SE200 Series DVI IN DVI IN RGB IN SE450, SE650 Series DVI IN DVI IN 1 RGB IN Connect the HDMI-DVI cable to the [DVI IN] port on the back of the product and the HDMI port on the PC. 2 Press [ ] to change the input source to DVI.
2 Connecting and Using a Source Device Connection Using the DP Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. S**E450D* DP IN DP IN RGB IN DVI IN 1 2 Connect the DP cable to the [DP IN] port on the back of the product and the DP port on the PC. Press [ ] to change the input source to DisplayPort.
2 Connecting and Using a Source Device 2.2.2 Connecting the Power Connecting parts may differ in different products. The exterior may differ depending on the product. To use the product, connect the power cable to a power outlet and the [POWER IN] port on the product. SE200 Series POWER IN DVI IN RGB IN SE450, SE650 Series POWER IN DVI IN RGB IN The input voltage is switched automatically.
2 Connecting and Using a Source Device Connecting USB (S**E450D* Models) The [ Applicable to the stand models that have USB ports only. You can use a USB device such as a mouse, keyboard, memory stick or external hard disk drive (HDD) by connecting it directly to the [ ] port on the monitor. You do not need to connect it to the computer. An external mass-storage HDD requires an external power supply and be sure to connect it to a power source.
2 Connecting and Using a Source Device 2 3 Connect the [ ] port of the USB monitor and a USB device with the USB cable. The use procedures are as the same as those for using an external device connecting to the PC. You can connect and use a keyboard and mouse. You can play a file from a media device. (Examples of media devices: MP3, digital camera, etc.) You can run, move, copy or delete the files on the storage device.
2 Connecting and Using a Source Device Changing the sound settings on Windows (S**E450M* Models) Control Panel → Audio → Speaker → Speaker Setup 1 2 3 4 2 Connecting and Using a Source Device 54
2 Connecting and Using a Source Device 2.2.3 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers. An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.2.4 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. 6HWXS *XLGH 7KH RSWLPDO UHVROXWLRQ IRU WKLV PRQLWRU LV DV IROORZV ****x**** **Hz 8VH WKH DERYH VHWWLQJV WR VHW WKH UHVROXWLRQ RQ \RXU 3& (QJOLVK 2.
3 Screen Setup A detailed description of each function is provided. Refer to your product for details. Configure the screen settings such as brightness. 3.1 Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Smart Eco Saving is set. This menu is not available when Eye Saver Mode is enabled.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.2.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. SAMSUNG This menu is not available when MAGIC Upscale is in Mode1 or Mode2. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.3.
3 3.4 Screen Setup Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation.
3 3.5 Screen Setup Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. This menu is not available when Eye Saver Mode or Smart Eco Saving is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.5.1 Configuring Game Mode 1 Press any button on the front of the product to display the Key Guide.
3 3.6 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. This menu is not available when Smart Eco Saving is enabled. This menu is not available when Game Mode is enabled. This menu is not available when Eye Saver Mode is enabled. SAMSUNG This menu is not available when MAGIC Angle is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product.
3 3.7 Screen Setup SAMSUNG MAGIC Angle (Except S19E200NY / S22E200NY / S24E650BW) SAMSUNG MAGICAngle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode or Eye Saver Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product.
3 Screen Setup 4 5 Custom: Lean Back Mode 1 will be applied by default if Custom is selected. Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
3 3.8 Screen Setup SAMSUNG MAGIC Upscale SAMSUNG MAGICUpscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.8.
3 3.9 Screen Setup Image Size (Except S19E200BR / S19E450BR / S19E450MR) Change the picture size. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.9.1 Changing the Image Size 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product.
3 Screen Setup Changing the screen size is available when the following conditions are satisfied. 4 5 A digital output device is connected using the DVI/DP cable. The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (not every model can support all of these signals). This can only be set when the external input is connected through DVI and PC/AV Mode is set to AV. Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
3 Screen Setup 3.10 Response Time (S24E650BW) Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time to Standard or Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.10.1 Configuring the Response Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 Screen Setup 3.11 H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is available in Analog mode. This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally ,select Screen Fit to adjust horizontal position in 0-6 levels. The functions available on the monitor may vary depending on the model.
3 Screen Setup 3.12 Coarse Adjust the screen frequency. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.12.1 Adjusting Coarse 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Coarse and press [ ] on the product. ] on the product.
3 Screen Setup 3.13 Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.13.1 Adjusting Fine 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
4 Configuring Tint A detailed description of each function is provided. Refer to your product for details. SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is in Cinema or Web mode, Dynamic Contrast mode. This menu is not available when Game Mode or Eye Saver Mode is enabled. 4.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.1.
4 4.2 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product. ] on the product. The following screen will appear.
4 4.3 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product. ] on the product. The following screen will appear.
4 4.4 Configuring Tint Color Tone Adjust the general color tone of the picture. SAMSUNG This menu is not available when MAGIC Angle is enabled. 4.4.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Color Tone and press [ ] on the product. ] on the product. The following screen will appear.
4 4.5 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. SAMSUNG This menu is not available when MAGIC Angle is enabled. 4.5.1 Configuring Gamma 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear.
5 5.1 Resizing or Relocating the Screen A detailed description of each function is provided. Refer to your product for details. Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Changing the Language 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.2 Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
5 5.3 Resizing or Relocating the Screen Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.4 Resizing or Relocating the Screen Transparency Set the transparency for the menu windows. 5.4.1 Changing Transparency 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Transparency and press [ ] on the product. ] on the product. The following screen will appear.
6 6.1 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Reset All Return all the settings for the product to the default factory settings. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.1.1 Initializing Settings (Reset All) 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.2 Setup and Reset Smart Eco Saving The Smart Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. This menu is not available when Eye Saver Mode is enabled. Game Mode will automatically turn off when Smart Eco Saving is enabled. Dynamic Contrast mode is not available when Smart Eco Saving is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.2.
6 6.3 Setup and Reset Off Timer (S19E200NW / S19E200NY / S22E200N / S22E200NY) You can set the product to automatically turn off. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.3.1 Configuring Off Timer 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to SETUP&RESET and press [ ] on the product.
6 Setup and Reset 6.3.2 Configuring Turn Off After 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer and press [ Press [ ] to move to Turn Off After and press [ ] on the product. ] on the product. ] on the product. The following screen will appear. Off Timer Set the monitor to automatically turn off after a certain time period.
6 6.4 Setup and Reset Off Timer Plus (Except S19E200NW / S19E200NY / S22E200N / S22E200NY) You can set the product to automatically turn off. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.4.1 Configuring Off Timer Off Timer 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to SETUP&RESET and press [ ] on the product.
6 Setup and Reset 6 7 Off: Deactivate the off timer so that the product does not power off automatically. On: Activate the off timer so that the product powers off automatically. Press [ ] to move to the option you want and press [ ]. The selected option will be applied. Turn Off After 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 Setup and Reset 6.4.2 Configuring Eco Timer This menu is not available for S19E200NY, S19E200NW, S22E200NY and S22E200N models. Eco Timer 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Off Timer Plus and press [ Press [ ] to move to Eco Timer and press [ ] on the product.
6 Setup and Reset Eco Off After 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 4 5 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer Plus and press [ Press [ ] to move to Eco Timer and press [ Press [ ] to move to Eco Off After and press [ ] on the product. ] on the product. ] on the product. ] on the product. The following screen will appear.
6 6.5 Setup and Reset PC/AV Mode (Except S19E200NW / S19E200NY / S22E200N / S22E200NY) Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to DVI) is in power saving mode or is displaying the message Check Signal Cable, press the [ MENU ] button to display the On Screen Display (OSD). You can select PC or AV.
6 Setup and Reset PC/AV Mode PC/AV Mode DVI PC DisplayPort AV Select the PC/AV mode for the DVI source. Select the PC/AV mode for the DisplayPort source. DVI PC DisplayPort AV AUTO AUTO PC/AV Mode DVI PC Select the PC/AV mode for the DVI source. AV AUTO 4 5 Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
6 6.6 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.6.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product.
6 6.7 Setup and Reset Source Detection (Except S19E200NW / S19E200NY / S22E200N / S22E200NY) You can activate Source Detection. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.7.1 Configuring Source Detection 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
7 7.1 INFORMATION Menu and Others A detailed description of each function is provided. Refer to your product for details. INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear.
7 7.2 INFORMATION Menu and Others Configuring Brightness, Contrast and Sharpness from the Initial Screen Adjust the Brightness, Contrast and Sharpness setting using the [ ] buttons in the initial screen (where no OSD menu is displayed). Brightness : SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is not available when Smart Eco Saving is enabled. This menu is not available when Eye Saver Mode is enabled.
7 7.3 INFORMATION Menu and Others Configuring Volume in the Initial Screen Adjust the Volume by pressing the [ 1 ] button when the Key Guide is displayed. Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [ ]. The following screen will appear. Volume 2 Adjust the Volume setting using the [ 50 ] buttons. Applicable to the models that have speakers only. Volume can be adjusted if a cable is connected to the [IN] port.
8 8.1 Installing the Software MultiScreen MultiScreen "MultiScreen" enables users to use the monitor by partitioning multiple sections. 8.1.1 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen" setup file on the CD-ROM. 3 4 When the Installation Wizard appears, click "Next".
8 Installing the Software Hardware At least 32MB of memory At least 60MB of free space on the hard disk drive 8.1.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "MultiScreen" from the program list and click the Add/Delete button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue Issues Solutions The power LED is off. The screen will not switch on. Check that the power cable is connected properly. (Refer to "2.2 Connecting and Using a PC") The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "2.2 Connecting and Using a PC") Check that the device connected to the product is powered on. Not Optimum Mode is displayed.
9 Troubleshooting Guide Issues There is no image on the screen and the power LED blinks every 0.5 to 1 second. Solutions The product is operating in power-saving mode. Press any key on the keyboard or move the mouse to return to normal operating mode. Sound issue Issues There is no sound. Solutions Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Go to Control Panel Display Settings Appearance and Themes Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Advanced Display Settings Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel Display Appearance and Themes Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Personalization Personalize Appearance and Display Settings, and adjust the resolution.
10 Specifications 10.1 General (S19E200NY / S19E200NW) Model Name Panel S19E200NY S19E200NW Size 19 CLASS (18.5 inches / 47.0 cm) 19 CLASS (19.0 inches / 48.1 cm) Display area 409.8 mm (H) x 230.4 mm (V) 408.24 mm (H) x 255.15 mm (V) 16.1 Inches (H) x 9.1 Inches (V) 16.1 Inches (H) x 10.0 Inches (V) 0.300 mm (H) x 0.300 mm (V) 0.2835 mm (H) x 0.2835 mm (V) 0.011811 Inches (H) x 0.011811 Inches (V) 0.011161 Inches (H) x 0.
10 Specifications This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.2 General (S19E200BW / S19E200BR) Model Name Panel S19E200BW S19E200BR Size 19 CLASS (19.0 inches / 48.1 cm) 19 CLASS (19.0 inches / 48.2 cm) Display area 408.24 mm (H) x 255.15 mm (V) 376.32 mm (H) x 301.06 mm (V) 16.1 Inches (H) x 10.0 Inches (V) 14.8 Inches (H) x 11.9 Inches (V) 0.2835 mm (H) x 0.2835 mm (V) 0.294 mm (H) x 0.294 mm (V) 0.011161 Inches (H) x 0.011161 Inches (V) 0.011575 Inches (H) x 0.
10 Specifications This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.3 General (S22E200NY) Model Name Panel S22E200NY Size 22 CLASS (21.5 inches / 54.6 cm) Display area 476.64 mm (H) x 268.11 mm (V) 18.8 Inches (H) x 10.6 Inches (V) Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V) 0.009774 Inches (H) x 0.009774 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 504.3 x 301.9 x 77.5 mm 19.
10 Specifications 10.4 General (S22E200B / S22E200N / S22E200BW) Model Name Panel S22E200B / S22E200N S22E200BW Size 22 CLASS (21.5 inches / 54.6 cm) 22 CLASS (22.0 inches / 55.8 cm) Display area 476.64 mm (H) x 268.11 mm (V) 473.76 mm (H) x 296.1 mm (V) 18.8 Inches (H) x 10.6 Inches (V) 18.7 Inches (H) x 11.7 Inches (V) 0.24825 mm (H) x 0.24825 mm (V) 0.282 mm (H) x 0.282 mm (V) 0.009774 Inches (H) x 0.009774 Inches (V) 0.011102 Inches (H) x 0.
10 Specifications (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.5 General (S23E200B / S24E200BL) Model Name Panel S23E200B S24E200BL Size 23 CLASS (23.0 inches / 58.4 cm) 24 CLASS (23.6 inches / 59.8 cm) Display area 509.76 mm (H) x 286.74 mm (V) 521.28 mm (H) x 293.22 mm (V) 20.1 Inches (H) x 11.3 Inches (V) 20.5 Inches (H) x 11.5 Inches (V) 0.2655 mm (H) x 0.2655 mm (V) 0.010453 Inches (H) x 0.010453 Inches (V) 0.2715 mm (H) x 0.2715 mm (V) 0.010689 Inches (H) x 0.
10 Specifications (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.6 General (S19E450BW / S19E450MW / S19E450BR / S19E450MR) Model Name Panel S19E450BW / S19E450MW S19E450BR / S19E450MR Size 19 CLASS (19.0 inches / 48.1 cm) 19 CLASS (19.0 inches / 48.2 cm) Display area 408.24 mm (H) x 255.15 mm (V) 16.1 Inches (H) x 10.0 Inches (V) 376.32 mm (H) x 301.06 mm (V) 14.8 Inches (H) x 11.9 Inches (V) Pixel Pitch 0.2835 mm (H) x 0.2835 mm (V) 0.011161 Inches (H) x 0.011161 Inches (V) 0.294 mm (H) x 0.294 mm (V) 0.011575 Inches (H) x 0.
10 Specifications Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications 10.7 General (S22E450B / S22E450M / S22E450D) Model Name Panel S22E450B / S22E450M S22E450D Size 22 CLASS (21.5 inches / 54.6 cm) Display area 476.64 mm (H) x 268.11 mm (V) 18.8 Inches (H) x 10.6 Inches (V) Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V) 0.009774 Inches (H) x 0.009774 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries.
10 Specifications Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications 10.8 General (S22E450BW / S22E450MW / S22E450DW) Model Name Panel S22E450BW / S22E450MW Size 22 CLASS (22.0 inches / 55.8 cm) Display area 473.76 mm (H) x 296.1 mm (V) 18.7 Inches (H) x 11.7 Inches (V) Pixel Pitch 0.282 mm (H) x 0.282 mm (V) S22E450DW 0.011102 Inches (H) x 0.011102 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries.
10 Specifications Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications 10.9 General (S23E450B) Model Name Panel S23E450B Size 23 CLASS (23.0 inches / 58.4 cm) Display area 509.76 mm (H) x 286.74 mm (V) 20.1 Inches (H) x 11.3 Inches (V) Pixel Pitch 0.2655 mm (H) x 0.2655 mm (V) 0.010453 Inches (H) x 0.010453 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 542.9 x 321.4 x 55.3 mm / 3.44 kg 21.
10 Specifications (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.10 General (S24E450BL / S24E450DL) Model Name Panel S24E450BL Size 24 CLASS (23.6 inches / 59.8 cm) Display area 521.28 mm (H) x 293.22 mm (V) 20.5 Inches (H) x 11.5 Inches (V) Pixel Pitch 0.2715 mm (H) x 0.2715 mm (V) S24E450DL 0.010689 Inches (H) x 0.010689 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 554.
10 Specifications Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications 10.11 General (S24E450B / S24E450M / S24E450D) Model Name Panel S24E450B / S24E450M S24E450D Size 24 CLASS (24.0 inches / 60.9 cm) Display area 531.36 mm (H) x 298.89 mm (V) 20.9 Inches (H) x 11.8 Inches (V) Pixel Pitch 0.27675 mm (H) x 0.27675 mm (V) 0.010896 Inches (H) x 0.010896 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries.
10 Specifications Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications 10.12 General (S24E650BW) Model Name Panel S24E650BW Size 24 CLASS (24.0 inches / 61.1 cm) Display area 518.4 mm (H) x 324.0 mm (V) 20.4 Inches (H) x 12.8 Inches (V) Pixel Pitch 0.270 mm (H) x 0.270 mm (V) 0.01063 Inches (H) x 0.01063 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 554.8 x 359.4 x 55.1 mm / 4.11 kg 21.
10 Specifications (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.13 General (S27E450B / S27E450D) Model Name Panel S27E450B Size 27 CLASS (27.0 inches / 68.5 cm) Display area 597.6 mm (H) x 336.15 mm (V) S27E450D 23.5 Inches (H) x 13.2 Inches (V) Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V) 0.01226 Inches (H) x 0.01226 Inches (V) Power Supply This product uses 100 to 240 V. Refer to the label at the back of the product as the standard voltage can vary in different countries. Dimensions (W x H x D) / Weight Without Stand 639.0 x 378.
10 Specifications Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications 10.14 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and making the Power LED blink if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a powersaving function.
10 Specifications PowerSaver Normal operation mode Energy Star Power Consumption Power saving mode Power off (Power button) Typical 25 W Typical 22 W Less than 0.1 W Less than 0.1 W Power Consumption (S23E200B) Power Consumption (S24E200BL) Power Consumption (S19E450BW) Typical 15 W Power Consumption (S19E450MW) Power Consumption Typical 19 W Typical 0.3 W (S19E450BR) Less than 0.
10 Specifications PowerSaver Normal operation mode Energy Star Power Consumption Power saving mode Power off (Power button) Power Consumption (S22E450M) Typical 21 W Power Consumption (S22E450D) Power Consumption Typical 24 W (S22E450BW) Power Consumption Typical 19 W (S22E450MW) Typical 0.3 W Power Consumption Less than 0.
10 Specifications PowerSaver Normal operation mode Energy Star Power Consumption Typical 25 W Typical 23 W Power saving mode Power off (Power button) Power Consumption (S24E450B) Power Consumption (S24E450M) Power Consumption (S24E450D) Power Consumption Typical 0.3 W Less than 0.
10 Specifications 10.15 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications Synchronization Model Name Horizontal Frequency S24E650BW Resolution Vertical Frequency Optimum Resolution Maximum Resolution 56 – 60 Hz 1920 x 1200 @ 60 Hz 1920 x 1200 @ 60 Hz 56 – 75 Hz 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz S24E450B S24E450M S24E450D 30 – 81 kHz S27E450B S27E450D If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted.
10 Specifications S19E200NY Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.
10 Specifications S19E200NW / S19E200BW / S19E450BW / S19E450MW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.
10 Specifications S19E200BR / S19E450BR / S19E450MR Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.
10 Specifications S22E200NY / S22E200N / S22E200B / S23E200B / S24E200BL / S22E450B / S22E450M / S22E450D / S23E450B / S24E450BL / S24E450DL / S24E450B / S24E450M / S24E450D / S27E450B / S27E450D Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.
10 Specifications S22E200BW / S22E450BW / S22E450MW / S22E450DW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.
10 Specifications S24E650BW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1440 x 900 55.935 59.887 106.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. If a defect is caused by external environmental factors.
Appendix If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080 vertical lines (vertical resolution).
Index B K Before Connecting 45 Key Repeat Time 91 Blue 74 Brightness 57 L Language 77 C Cleaning 9 Coarse 70 M MultiScreen 96 Color Tone 75 Connecting and Using a PC 46 Contrast 58 Copyright 8 Correct Disposal 142 O Off Timer 83 Off Timer Plus 85 Correct posture to use the product 19 P D Display Time 79 Parts 22 PC/AV Mode 89 PowerSaver 128 E Eye Saver Mode 60 Q Q & A 101 F Fine 71 R Red 72 G Requirements Before Contacting Samsung Customer Service Center 98 Game Mode 61 Reset All 81 Ga
Index Sharpness 59 Smart Eco Saving 82 Source Detection 92 Standard Signal Mode Table 132 T Terminology 143 Transparency 80 Index 146