User manual S19C200NY S19C200N S19C200NW S19C200BW S19C200BR S19C200NR S20C200B S22C200NY S22C200N S22C200B S22C200BW S22C210B S23C200B S24C200BL The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE 7 Copyright 7 7 Icons used in this manual Symbols for safety precautions 8 Cleaning 8 9 9 Cleaning Securing the Installation Space Precautions for storage 10 Safety Precautions 10 11 13 Electricity and Safety Installation and Safety Operation and Safety 16 Correct posture to use the product 17 Checking the Contents 17 18 Removing the Packaging Checking the Components 19 Parts 19 21 Frontal B
Table Of Contents SCREEN SETUP CONFIGURING TINT 34 Brightness 34 Configuring Brightness 35 Contrast 35 Configuring Contrast 36 Sharpness 36 Configuring Sharpness 37 SAMSUNG MAGIC Bright 37 Configuring SAMSUNG MAGIC Bright 38 SAMSUNG MAGIC Angle 38 Configuring SAMSUNG MAGIC Angle 39 SAMSUNG MAGIC Upscale 39 Configuring SAMSUNG MAGIC Upscale 40 Image Size 40 Changing the Image Size 42 H-Position & V-Position 42 Configuring H-Position & V-Position 43 Coarse 43 Adjusting Co
Table Of Contents RESIZING OR RELOCATING THE SCREEN SETUP AND RESET 49 Gamma 49 Configuring Gamma 50 Language 50 Changing the Language 51 Menu H-Position & Menu V-Position 51 Configuring Menu H-Position & Menu VPosition 52 Display Time 52 Configuring Display Time 53 Transparency 53 Changing Transparency 54 Reset 54 Initializing Settings (Reset) 55 Eco Saving 55 Configuring Eco Saving 56 Off Timer 56 Configuring Off Timer 57 Turn Off After 57 Configuring Turn Off After
Table Of Contents INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE TROUBLESHOOTING GUIDE SPECIFICATIONS APPENDIX 62 INFORMATION 62 Displaying INFORMATION 63 Configuring Brightness and Contrast in the Initial Screen 64 Magic Tune 64 64 65 What is MagicTune? Installing the Software Removing the Software 66 MultiScreen 66 67 Installing the Software Removing the Software 68 Requirements Before Contacting Samsung Customer Service Center 68 68 68 Testing the Product Checking the Resoluti
Table Of Contents 108 Terminology INDEX Table Of Contents 6
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 3.93 inches (10 cm) 3.93 inches(10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.
Before Using the Product Safety Precautions Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. ! An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable. Otherwise, the cable may be damaged and product failure, an electric shock or fire may result. If a gas leakage is found, do not touch the product or power plug.
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver. -_! Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Before Using the Product Exercise caution when adjusting the product angle or stand height. ! Otherwise, children's fingers or hands may become stuck and injured. Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product. Product failure or personal injure may result. Correct posture to use the product Use the product in the correct posture as follows. Straighten your back.
1 1.1 Preparations Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the styrofoam from the product. 3 Check the components and remove the styrofoam and plastic bag. This image is for reference only. 4 Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card (Not available in some locations) User manual Power cable D-SUB cable (optional) DVI cable (optional) Stand Stand Connector Components may vary depending on the country.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide SAMSUNG MAGIC ANGLE Icons Description MENU AUTO Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
1 Preparations Icons Description Use this button to control the brightness and contrast of the screen. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. This function is not available for products with an Analog interface only.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DVI IN DVI IN RGB IN POWER IN RGB IN Port POWER IN Ports Connect the power cord for your monitor to the POWER IN port on the back of the product. Connect to a PC using the DVI cable. The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only. Connect to a PC using the D-SUB cable.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the Stand Connector into the Stand in the direction shown by the figure. Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
1 Preparations 1.3.2 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1° (± 2°) ~ 20° (± 2°) You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully.
1 Preparations 1.3.3 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Hold the main body of the product with your hand as shown by the figure. Pull the stand in the direction of the arrow as shown in the figure to separate it.
1 Preparations Notes Using a screw longer than the standard length can damage the internal components of the product. The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury.
2 2.1 Connecting and Using a Source Device Before Connecting DVI IN POWER IN RGB IN 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. 2.2 Check the types of ports at the back of the product you want to connect.
2 2.3 Connecting and Using a Source Device Connecting and Using a PC 2.3.1 Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using the D-SUB Cable (Analog Type) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. RGB IN 1 2 Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
2 Connecting and Using a Source Device 2.3.2 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers. An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. The optimal resolution for this monitor is as follows: **** x **** **Hz Use the above settings to set the resolution on your PC.
2 Connecting and Using a Source Device 2.3.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel 1 Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and change the resolution.
3 3.1 Screen Setup Configure the screen settings such as brightness. Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is unavailable when Eco Saving is set. 3.1.1 Configuring Brightness 1 Press any button on the front of the product to display the Key Guide.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. 3.2.1 Configuring Contrast 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. SAMSUNG This menu is not available when MAGIC Upscale is in Mode1 or Mode2. 3.3.1 Configuring Sharpness 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.4 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. This menu is unavailable when Eco Saving is set. SAMSUNG This menu is not available when MAGIC Angle is enabled. You can customize the brightness to suit your preferences. 3.4.1 Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.5 Screen Setup SAMSUNG MAGIC Angle SAMSUNG MAGICAngle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. This menu is not available for S19C200NY and S22C200NY models. You can customize the angle to suit your preferences. 3.5.1 Configuring SAMSUNG MAGIC Angle 1 Press any button on the front of the product to display the Key Guide.
3 3.6 Screen Setup SAMSUNG MAGIC Upscale SAMSUNG MAGICUpscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. 3.6.1 Configuring SAMSUNG MAGIC Upscale 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.7 Screen Setup Image Size Change the picture size. 3.7.1 Changing the Image Size 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ ] on the product. Press [ ] to move to Image Size and press [ ] on the product. The following screen will appear.
3 Screen Setup PICTURE Brightness Contrast Sharpness SAMSUNG MAGIC Bright Custom SAMSUNG MAGIC Angle Off SAMSUNG :LGH 6FUHHQ )LW MAGIC Upscale Image Size AUTO 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
3 3.8 Screen Setup H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is available in Analog mode. This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally ,select Screen Fit to adjust horizontal position in 0-6 levels. 3.8.
3 3.9 Screen Setup Coarse Adjust the screen frequency. This menu is available in Analog mode only. 3.9.1 Adjusting Coarse 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Coarse and press [ ] on the product. ] on the product. The following screen will appear.
3 Screen Setup 3.10 Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. 3.10.1 Adjusting Fine 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Fine and press [ ] on the product. ] on the product. The following screen will appear.
4 Configuring Tint SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. 4.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.1.1 Configuring Red 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
4 4.2 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product. ] on the product. The following screen will appear.
4 4.3 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product. ] on the product. The following screen will appear.
4 4.4 Configuring Tint Color Tone Adjust the general color tone of the picture. SAMSUNG This menu is not available when MAGIC Angle is enabled. 4.4.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Color Tone and press [ ] on the product. The following screen will appear.
4 4.5 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. SAMSUNG This menu is not available when MAGIC Angle is enabled. 4.5.1 Configuring Gamma 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear.
5 5.1 Resizing or Relocating the Screen Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Changing the Language 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Language and press [ ] on the product.
5 5.2 Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
5 5.3 Resizing or Relocating the Screen Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.4 Resizing or Relocating the Screen Transparency Set the transparency for the menu windows: 5.4.1 Changing Transparency 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Transparency and press [ ] on the product. ] on the product. The following screen will appear.
6 6.1 Setup and Reset Reset Return all the settings for the product to the default factory settings. 6.1.1 Initializing Settings (Reset) 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset and press [ ] on the product. ] on the product. The following screen will appear.
6 6.2 Setup and Reset Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when MAGIC Bright is in Dynamic Contrast mode. 6.2.1 Configuring Eco Saving 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.3 Setup and Reset Off Timer You can set the product to automatically turn off. 6.3.1 Configuring Off Timer 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer and press [ ] on the product. ] on the product. The following screen will appear.
6 6.4 Setup and Reset Turn Off After The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is available only when Off Timer is set to On. 6.4.1 Configuring Turn Off After 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.5 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to DVI) is in power saving mode or is displaying the message Check Signal Cable, press the [ MENU ] button to display the On Screen Display (OSD). You can select PC or AV. 6.5.
6 6.6 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.6.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product. ] on the product. The following screen will appear.
6 6.7 Setup and Reset Source Detection You can activate Source Detection. 6.7.1 Configuring Source Detection 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Source Detection and press [ ] on the product. ] on the product. The following screen will appear.
6 6.8 Setup and Reset Customized Key You can customize Customized Key as follows. 6.8.1 Configuring Customized Key 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Customized Key and press [ ] on the product. The following screen will appear.
7 7.1 INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear.
7 7.2 INFORMATION Menu and Others Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness or Contrast setting using the [ ] buttons in the initial screen (where no OSD menu is displayed). 1 Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [ ]. The following screen will appear. Brightness 100 Contrast 75 EXIT 2 3 Press the [ ] button to alternate between the Brightness and Contrast settings.
8 8.1 Installing the Software Magic Tune 8.1.1 What is MagicTune? MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. You can adjust the product with the mouse and the keyboard without using the operating buttons of the product. 8.1.2 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the MagicTune setup program.
8 Installing the Software 8.1.3 Removing the Software You can only remove MagicTune™ through [Add or Remove Programs] in Windows. To remove MagicTune™, complete the following steps. 1 Click [Start] select [Settings], and select [Control Panel] from the menu. For Windows XP, click [Start], and select [Control Panel] from the menu. 2 3 4 5 6 Double-click the [Add or Remove Programs] icon in the Control Panel. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.
8 8.2 Installing the Software MultiScreen MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections. 8.2.1 Installing the Software 1 2 Insert the installation CD into the [CD-ROM drive]. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen" setup file on the [CD-ROM]. 3 4 When the Installation Wizard appears, click [Next].
8 Installing the Software 8.2.2 Removing the Software Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs]. Select "MultiScreen" from the program list and click the [Add/Delete] button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 86). The images on the screen look distorted. Check the cable connection to the product (Refer to "2.3 Connecting and Using a PC") The screen is not clear. The screen is blurry.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Go to Control Panel Themes Display Settings Appearance and Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Settings Advanced Display Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel Themes Display Appearance and Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Personalization Personalize Appearance and Display Settings, and adjust the resolution.
10 Specifications 10.1 General Model Name Size Display area Panel Pixel Pitch S19C200NY S19C200N S19C200NW 18.5 Inches (47 cm) 18.5 Inches (47 cm) 19.0 Inches (48 cm) 409.8 mm (H) x 230.4 mm (V) 409.8 mm (H) x 230.4 mm (V) 408.24 mm (H) x 255.15 mm (V) 16.1 Inches (H) x 16.1 Inches (H) x 9.1 Inches (V) 9.1 Inches (V) 16.1 Inches (H) x 10.04 Inches (V) 0.300 mm (H) x 0.300 mm (V) 0.300 mm (H) x 0.300 mm (V) 0.2835 mm (H) x 0.2835 mm (V) 0.012 Inches (H) x 0.012 Inches (H) x 0.
10 Specifications Model Name S19C200NY S19C200N Operating Temperature : 50°F – 104°F (10°C – 40°C) Humidity : 10 % – 80 %, non-condensing Storage Temperature : -4°F – 113°F (-20°C – 45°C) Humidity : 5 % – 95 %, non-condensing Environmental considerations S19C200NW Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically.
10 Specifications Model Name Size Display area Panel Pixel Pitch S19C200BW S19C200BR S19C200NR 19.0 Inches (48 cm) 19.0 Inches (48 cm) 19.0 Inches (48 cm) 408.24 mm (H) x 255.15 mm (V) 376.32 mm (H) x 301.06 mm (V) 376.32 mm (H) x 301.06 mm (V) 16.1 Inches (H) x 10.04 Inches (V) 14.8 Inches (H) x 11.9 Inches (V) 14.8 Inches (H) x 11.9 Inches (V) 0.2835 mm (H) x 0.2835 mm (V) 0.294 mm (H) x 0.294 mm (V) 0.294 mm (H) x 0.294 mm (V) 0.011 Inches (H) x 0.011 Inches (V) 0.012 Inches (H) x 0.
10 Specifications Model Name S19C200BW S19C200BR Operating Temperature : 50°F – 104°F (10°C – 40°C) Humidity : 10 % – 80 %, non-condensing Storage Temperature : -4°F – 113°F (-20°C – 45°C) Humidity : 5 % – 95 %, non-condensing Environmental considerations S19C200NR Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically.
10 Specifications Model Name Size Display area Panel Pixel Pitch S20C200B S22C200NY S22C200N 20.0 Inches (50 cm) 21.5 Inches (54 cm) 21.5 Inches (54 cm) 442.8 mm (H) x 249.08 mm (V) 476.64 mm (H) x 268.11 mm (V) 476.64 mm (H) x 268.11 mm (V) 17.4 Inches (H) x 9.8 Inches (V) 18.8 Inches (H) x 10.6 Inches (V) 18.8 Inches (H) x 10.6 Inches (V) 0.27675 mm (H) x 0.27675 mm (V) 0.24825 mm (H) x 0.24825 mm (V) 0.24825 mm (H) x 0.24825 mm (V) 0.011 Inches (H) x 0.011 Inches (V) 0.
10 Specifications Model Name S20C200B S22C200NY S22C200N 100 mm x 100 mm VESA Mounting Interface 3.9 Inches x 3.9 Inches (For use with Specialty(Arm) Mounting hardware.) Operating Temperature : 50°F – 104°F (10°C – 40°C) Humidity : 10 % – 80 %, non-condensing Storage Temperature : -4°F – 113°F (-20°C – 45°C) Humidity : 5 % – 95 %, non-condensing Environmental considerations Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems.
10 Specifications Model Name Size Panel Display area S22C200B S22C200BW 21.5 Inches (54 cm) 22.0 Inches (55 cm) 476.64 mm (H) x 268.11 mm (V) 473.76 mm (H) x 296.1 mm (V) 18.8 Inches (H) x 10.6 Inches (V) 18.7 Inches (H) x 11.7 Inches (V) 0.24825 mm (H) x 0.24825 mm (V) 0.282 mm (H) x 0.282 mm (V) Pixel Pitch 0.010 Inches (H) x 0.010 Inches (V) Horizontal Frequency 30 ~ 81 kHz Vertical Frequency 56 ~ 75 Hz 0.011 Inches (H) x 0.011 Inches (V) Synchronization Display Color 16.
10 Specifications Model Name S22C200B S22C200BW Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired.
10 Specifications Model Name Size Panel Display area Pixel Pitch S22C210B S23C200B 21.5 Inches (54 cm) 23.0 Inches (58 cm) 476.64 mm (H) x 268.11 mm (V) 509.76 mm (H) x 286.74 mm (V) 18.8 Inches (H) x 10.6 Inches (V) 20.1 Inches (H) x 11.3 Inches (V) 0.24825 mm (H) x 0.24825 mm (V) 0.2655 mm (H) x 0.2655 mm (V) 0.010 Inches (H) x 0.010 Inches (V) Horizontal Frequency 30 ~ 81 kHz Vertical Frequency 56 ~ 75 Hz 0.010 Inches (H) x 0.010 Inches (V) Synchronization Display Color 16.
10 Specifications Model Name S22C210B S23C200B Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications Model Name Size Panel Display area Pixel Pitch S24C200BL 23.6 Inches (59 cm) 521.28 mm (H) x 293.22 mm (V) 20.2 Inches (H) x 11.6 Inches (V) 0.2715 mm (H) x 0.2715 mm (V) 0.011 Inches (H) x 0.011 Inches (V) Horizontal Frequency 30 ~ 81 kHz Vertical Frequency 56 ~ 75 Hz Synchronization Display Color 16.7M Optimum Resolution 1920x1080@60Hz Maximum Resolution 1920x1080@60Hz Resolution Maximum Pixel Clock 148MHz (Analog,Digital) This product uses 100 to 240V.
10 Specifications Model Name S24C200BL Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired. Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel.
10 Specifications 10.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
10 Specifications PowerSaver Power Consumption Normal operation mode Energy Star Power Consumption Typical 24 watts 21 watts Typical 24 watts 19 watts Typical 24 watts 21 watts Typical 25 watts 22 watts Typical 30 watts 22 watts (S22C200B) Power Consumption (S22C200BW) Power Consumption (S22C210B) Power Consumption (S23C200B) Power Consumption (S24C200BL) Power saving mode Power off (Power button) Less than Less than 0.1 watts 0.1 watts Less than Less than 0.1 watts 0.
10 Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications S19C200N Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.
10 Specifications S19C200NW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S19C200BW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S19C200BR Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S19C200NR Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S20C200B Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S22C200NY Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S22C200N Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S22C200B Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S22C200BW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S22C210B Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S23C200B Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S24C200BL Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINE 0800-333-3733 http://www.samsung.com BOLIVIA 800-10-7260 http://www.samsung.
Appendix LATIN AMERICA GUATEMALA 1-800-299-0013 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) HONDURAS 800-27919267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung.com NICARAGUA 00-1800-5077267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) PANAMA 800-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.
Appendix EUROPE CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 till 8.2.2013 . From 8.2.2013: Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4 DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.
Appendix EUROPE PORTUGAL 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com ROMANIA 08008 SAMSUNG (08008 726 7864) http://www.samsung.com TOLL FREE No. SERBIA +381 11 321 6899 http://www.samsung.com (old number still active 0700 7267864) SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.
Appendix ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk (Chinese) http://www.samsung.com/hk_en (English) INDIA 1800 3000 8282 1800 266 8282 http://www.samsung.com/in INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.
Appendix MENA KUWAIT 183-2255 (183-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) QATAR 800-2255 (800-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/sa (Arabic) SYRIA 18252273 http://www.samsung.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal frequency) and 1,080 vertical lines (vertical resolution).
Index A I Appendix 100 Image Size 40 INFORMATION 62 B Installation 22 Before Connecting 26 Blue 47 K Brightness 34 Key Repeat Time 59 C L Checking the Contents 17 Language 50 Cleaning 8 Coarse 43 Color Tone 48 M MultiScreen 66 Connecting and Using a PC 27 Contact SAMSUNG WORLD WIDE 100 Contrast 35 Copyright 7 O Off Timer 56 Correct Disposal 107 Correct posture to use the product 16 P Customized Key 61 Parts 19 PC/AV Mode 58 D Display Time 52 Q Q & A 70 E Eco Saving 55 R Red 45 F F
Index SAMSUNG MAGIC Angle 38 SAMSUNG MAGIC Bright 37 SAMSUNG MAGIC Upscale 39 Sharpness 36 Source Detection 60 Standard Signal Mode Table 86 T Transparency 53 Turn Off After 57 Index 111