S27B970D / S27B971D User manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table of Contents Chapter. 1 BEFORE USING THE PRODUCT Chapter. 3 USING NCE (NATURAL COLOR EXPERT) 5 6 6 6 7 7 8 9 12 19 19 20 20 21 21 21 21 Copyright Securing the Installation Space Safety Precautions Symbols Cleaning Electricity and Safety Installation and Safety Operation and Safety Correct posture to use the product 22 23 Chapter.
Chapter. 5 CONNECTING AND USING A SOURCE DEVICE Chapter. 7 CONFIGURING THE TINT SETTINGS 30 40 40 41 41 41 41 42 42 42 42 43 43 30 30 31 31 33 34 34 36 Checklist before Connecting to Source Devices Pre-connection Checkpoints Connecting the Power Connecting and Using a PC Connecting to a PC Driver Installation Setting Optimum Resolution Changing the Resolution Using a PC Connecting to a Video Device Chapter.
Chapter. 10 INFORMATION MENU AND OTHERS 52 52 52 53 54 INFORMATION Viewing information (INFORMATION) Configuring Color Mode in the Initial Screen Configuring Volume in the Initial Screen Configuring Brightness and Contrast in the Initial Screen Chapter. 13 SPECIFICATIONS 59 60 60 Chapter. 14 APPENDIX 62 66 Chapter.
Chapter. 1 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft® and Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
B efore Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. Caution Do not open the cover. You may suffer an electric shock. The components inside this product must not be repaired by home users. Contact a technician for repair.
B efore Using the Product Cleaning The following images are for reference only. Real-life situations may differ from what is shown in the images. Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Take the following steps when cleaning. Do not use a damaged power cable or plug, or a loose power socket.
B efore Using the Product Do not bend or pull the power cable with force. Also, do not place a heavy object on the power cable. Installation and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. -- Damage to the cord may result in a fire or electric shock. Do not place the power cable or product near heat sources. Warning -- A fire or electric shock may result.
B efore Using the Product Do not install the product within the reach of young children. The product may fall and injure children. SAMSUNG ! -- Be sure to consult Samsung Customer Service Center if you want to install the product at such a place. Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter.
B efore Using the Product If the product is dropped or the outer case is damaged, turn off the power switch and disconnect the power cable. Then contact Samsung Customer Service Center. -- Continued use can result in a fire or electric shock. Do not use or keep combustible spray or an inflammable substance near the product. -- An explosion or fire may result. ! Ensure the vents are not blocked by tablecloths or curtains. Do not leave heavy objects or items that children like (toys, sweets, etc.
B efore Using the Product Caution Do not leave the DC power adapter near a heat source. -- Otherwise, a fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. -- If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.
B efore Using the Product Store small accessories out of the reach of children. Correct posture to use the product Use the product in the correct posture as follows: ! Do not place heavy objects on the product. -- Product failure or personal injury may result. • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen.
Chapter. 2 Preparation Checking the Contents 2. Remove the styrofoam from the product. Removing the Packaging The appearance of the actual product may differ from the images shown. 1. Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 3. Check the product and remove the styrofoam and plastic bag. NOTE • The appearance of the actual product may differ from the image shown. • This image is for reference only. 4.
Preparation Checking the Components Items sold separately Contact the vendor where you purchased the product if any components are missing. The appearance of the components and items sold separately may differ from the image shown. NOTE The following items can be purchased at your nearest retailer. Components NOTE HDMI-DVI cable Components may vary depending on the country.
Preparation Parts Icons Description Turn the power on or off. The power indicator will be lit when the product is operating normally. Front Buttons NOTE • For details on the power-saving function, refer to “Power-saving Function” in the product specifications. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Preparation Icons Rear View Description Move up to another menu item or adjust a setting when the OSD menu is displayed. When no OSD menu is displayed, the [ the Volume, Brightness or Contrast. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. ] buttons can be used to adjust NOTE • The Volume can be adjusted if the input source is DisplayPort or HDMI.
Preparation Side View Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 0.5° ~ -2° 0° ~ 15° BSU BSU BSU BSU • You can adjust the product tilt.
Preparation Adjusting the Product Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. BSU BSU BSU BSU BSU BSU • You can adjust the product height. • To avoid damage to the product, hold the middle of the left and right hand sides of the product when adjusting the tilt.
Chapter. 3 Using NCE (Natural Color Expert) Configure the screen settings such as brightness and color tone. What is Monitor Calibration? Most of digital images are managed onscreen. That is why a monitor is very important for photographers and designers. The process to calibrate a monitor in order to display proper colors is called monitor calibration. This product went through a calibration process using color measurement equipment in the factory before shipment.
Using NCE (Natural Color Expert) What is NCE (Natural Color Expert)? The Natural Color Expert (hereinafter "NCE") program was developed by Samsung Electronics to display optimized colors customized by users. NOTE • This product supports the monitor calibration feature through the internal NCE function and the provided NCE program. (a calibrator can be purchased separately).
Using NCE (Natural Color Expert) Starting NCE (Natural Color Expert) Features of the NCE Program Connecting the Calibrator Layout and Menu Items on the NCE Home Screen 1. Connect the PC IN port on the product to a USB port on the PC using the USB cable. Select “Profile List” to view information on each profile. Select the Start button to perform calibration. 2. Connect the calibrator to a USB port on the product.
Using NCE (Natural Color Expert) Select More to edit a profile as follows. • Rename: Change a profile name. 4 • Delete: Delete the selected profile. • Delete All: Delete all profiles on the list of profiles. Layout and Menu Items on the Uniformity Screen Perform calibration for Uniformity to optimize the display uniformity of the monitor. • Export: Save the selected profile to another path. • Import: Import a profile from another path. 5 Configure the system settings.
Using NCE (Natural Color Expert) Overview and Functions of the Verification Screen This screen allows you to verify the difference between the current monitor picture quality and the target value. (for calibration mode only) Starting Calibration If the “Profile List” does not contain a profile, select “Default” and then start calibration. If the “Profile List” contains profiles, select a profile to edit or calibrate the profile. Go to “Home screen – System settings – Profile Mode.” Basic mode 1.
Using NCE (Natural Color Expert) 2. Specify the color gamut. 3. Configure the Brightness. The brightness level after calibration may depend on the color temperature. 4. Configure the Black Level setting. If you do not adjust the black level setting by moving the slider button, the minimum brightness will automatically be applied. 5. Configure the color temperature for White Point (range: 4000K – 10000K). To select a standard brightness, click the Standard button.
Using NCE (Natural Color Expert) 6. Configure the R/G/B Gamma settings. If you configure LUT, the gamma curve of sRGB will be applied. 7. Start calibration. • If Linear Gray is selected, DeltaE (color difference) for the gray scale changes to less than 1 after calibration. • Attach the calibrator to the indicated spot on the screen, then click “Next.” • If Deep Black is selected, the black luminance becomes darker than Linear Gray after calibration.
Using NCE (Natural Color Expert) 8. After calibration, you can compare the screens before and after the calibration using the After / Before buttons. Advanced 1. Settings required to calibrate can be configured from a single page. Click “Save” to save the calibration results to Calibration on the monitor.
Using NCE (Natural Color Expert) 2. Start calibration. • Select the connected calibrator, then click “Next.” • Attach the calibrator to the indicated spot on the screen, then click “Next.” 3. After calibration, you can compare the screens before and after the calibration using the After / Before buttons. Click “Save” to save the calibration results to Calibration on the monitor. NOTE • Set the screensaver time to at least 30 minutes before starting measurement.
Chapter. 4 Using MHL MHL (Mobile High-Definition Link) Using MHL Connect a mobile device that supports MHL to the product and view videos and photos (saved on the device) using the product screen. MHL HDMI IN (MHL) 1. Connect the HDMI IN(MHL) port on the product to the Micro USB port on the mobile device using the mobile cable. NOTE • To use the MHL function, you need an MHL-certified mobile device. You can check if your mobile device is MHL certified on the website of the device manufacturer.
Using MHL 4. If the following message appears, MHL mode is activated. After about 3 seconds, the MHL screen will be displayed. HDMI/MHL MHL MHL 3 sec later [MHL] MHL activated. Disabling MHL When the cable is disconnected or the mobile device is powered off If the HDMI-MHL cable is disconnected or the mobile device is powered off when MHL is active, the MHL function will be disabled. NOTE NOTE If the mobile cable is disconnected, HDMI/MHL mode will still be enabled.
Chapter. 5 Connecting and Using a Source Device Checklist before Connecting to Source Devices Pre-connection Checkpoints Check the following before you connect this product with other devices. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. You can connect a camcorder, audio player or DVD player to the product.
Connecting and Using a Source Device Connecting and Using a PC Connection Using an HDMI Cable (Digital Type) Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using an HDMI-DVI Cable HDMI IN (MHL) HDMI OUT 1. Connect the HDMI cable to the HDMI IN(MHL) port on the back of the product and the HDMI port on the PC. 2. Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. 3.
Connecting and Using a Source Device Connection using a Dual-link DVI cable (digital type) DVI IN Connection Using the DP Cable DVI OUT DP IN DP OUT 1. Connect the DVI cable to the DVI IN port on the back of the product and the DVI port on the PC. 1. Connect the DP cable to the DP IN port on the back of the product and the DP port on the PC. 2. Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC. 2.
Connecting and Using a Source Device Driver Installation Connecting the Product to a PC as a USB HUB NOTE NOTE The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC. • You can set the optimum resolution and frequency for this product by installing the corresponding drivers. 1.
Connecting and Using a Source Device Setting Optimum Resolution Changing the Resolution Using a PC An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. NOTE Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Connecting and Using a Source Device Changing the Resolution on Windows Vista Changing the Resolution on Windows 8 Go to Control Panel → Personalization → Display Settings and change the resolution. Go to Settings → Control Panel → Display → Screen Resolution and change the resolution. 4 4 5 Changing the Resolution on Windows 7 Go to Control Panel → Display → Screen Resolution and change the resolution.
Connecting and Using a Source Device Connecting to a Video Device The product can be connected to a video device. Connecting parts may differ in different products. Connection Using an HDMI Cable HDMI IN (MHL) HDMI OUT 1. Connect the HDMI cable to the HDMI IN(MHL) port on the product and the HDMI port on the video device. 2. Press the [ ] button on the product to change the input source to HDMI/MHL. NOTE • Open the SETUP&RESET menu. Next, set PC/AV Mode to AV.
Chapter. 6 Screen Setup Brightness Configure the screen settings such as brightness and color tone. Dynamic Contrast You can adjust the general brightness of the picture. (Range: 0~100) Dynamic Contrast automatically adjusts the picture contrast to maintain a balance of bright and dark areas. A higher value will make the picture appear brighter. Changing the Dynamic Contrast Setting This option is enabled if Dynamic Contrast is set to Off. Configuring Brightness 1. Press [m] on the product. 2.
Screen Setup Contrast Sharpness Adjust the contrast between the objects and background. (Range: 0~100) Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. A higher value will make the outline of objects clearer. NOTE NOTE This option is enabled if Dynamic Contrast is set to Off. This option is enabled if Dynamic Contrast is set to Off. Configuring Contrast Configuring Sharpness 1. Press [m] on the product.
Screen Setup Response Time HDMI Black Level Accelerate the panel response rate to make video appear more vivid and natural. If you connect a DVD player or set-top box to the product using an HDMI cable, the contrast and color may degrade making the picture look darker. If this is the case, correct the degraded picture quality using the HDMI Black Level menu. NOTE • It is recommended to set the response rate to Normal or Faster when you are not viewing a video.
Chapter. 7 Configuring the Tint Settings Adjust the tint of the screen. Adjust the tint of the screen. • High Bright: Increase the brightness more than when in Cinema and sRGB modes. • Cinema: This mode is suitable to view entertainment content (video, DVD, etc.) providing a bright and sharp picture. Color Mode • sRGB: Change the color system to sRGB mode.
Configuring the Tint Settings Red Green Adjust the value of the color red in the picture. (Range: 0~100) Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. A higher value will increase the intensity of the color. Configuring Red Configuring Green 1. Press [m] on the product. 1. Press [m] on the product. 2. Move to COLOR using the [ ], [ 3. Move to Red using the [ ], [ The following screen will appear. ] buttons.
Configuring the Tint Settings Blue Color Temp. Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. Configuring Color Temp. Configuring Blue 1. Press [m] on the product. 2. Move to COLOR using the [ 3. Press [ ], [ ] to move to Color Temp. and press [ The following screen will appear. ] button. COLOR Red Green Color Mode Blue Standard : : Green : 50 : 50 Gamma Return 4.
Configuring the Tint Settings Gamma Adjust the mid-range brightness (Gamma) of the picture. Configuring Gamma 1. Press [m] on the product. 2. Move to COLOR using the [ ], [ ] buttons. Next, press the [ ] button. 3. Move to Gamma using the [ ], [ The following screen will appear. ] buttons. Next, press the [ ] button. COLOR Return 4. Move to the desired option using the [ button. : Gamma : Color Temp. : Blue : Green : Red : Color Mode 50 1.6 1.7 1.8 1.9 2.0 2.1 표준 2.2 2.3 2.4 2.5 2.
Chapter. 8 Resizing or Relocating the Screen Image Size In AV mode SIZE&POSITION Change the picture size. Image Size : H-Position V-Position NOTE 4:3 16:9 Screen Fit Menu H-Position : 50 The available Image Size menu options depend on the setting of PC/AV Mode under SETUP&RESET. Menu V-Position : 3 Configuring Image Size Return Move Enter • 4:3: This mode is suitable to view the 4:3 aspect ratio picture of video content or standard broadcasts.
Resizing or Relocating the Screen H-Position V-Position Move the screen to the left or right. Move the screen up or down. NOTE NOTE Adjusting the H-Position and V-Position settings is possible if Image Size is set to Screen Fit. Adjusting the H-Position and V-Position settings is possible if Image Size is set to Screen Fit. Configuring H-Position Configuring V-Position 1. Press [m] on the product. 1. Press [m] on the product. 2. Move to SIZE&POSITION using the [ 3.
Resizing or Relocating the Screen Menu H-Position Menu V-Position Move the menu position to the left or right. Move the menu position up or down. Configuring Menu H-Position Configuring Menu V-Position 1. Press [m] on the product. 1. Press [m] on the product. 2. Move to SIZE&POSITION using the [ ], [ ] buttons. Next, press the [ ] button. 2. Move to SIZE&POSITION using the [ ], [ ] buttons. Next, press the [ ] button. 3. Move to Menu H-Position using the [ The following screen will appear.
Chapter. 9 Setup and Reset Eco Saving Menu Transparency Adjust the power consumption of the product to save energy. Configure the transparency for the menu windows. Configuring Eco Saving Configuring Menu Transparency 1. Press [m] on the product. 1. Press [m] on the product. 2. Move to SETUP&RESET using the [ Next, press the [ ] button. 3. Move to Eco Saving using the [ Next, press the [ ] button. The following screen will appear. ], [ ], [ ] buttons. 2.
Setup and Reset Language PC/AV Mode Set the menu language. Set PC/AV Mode to AV. The size of the image displayed on the screen will be enlarged. This option is useful when viewing a movie. NOTE • A change to the language setting will only be applied to the onscreen menu display. • It will not be applied to other functions on your PC. 1. Press [m] on the product. Configuring Language 2. Move to SETUP&RESET using the [ Next, press the [ ] button. 1. Press [m] on the product. 2.
Setup and Reset Auto Source Display Time Enable/disable Auto Source mode that detects the input source automatically. Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Configuring Auto Source Display Time can be used to set the time after which you want the OSD menu to disappear automatically. Configuring Display Time 1. Press [m] on the product. 2. Move to SETUP&RESET using the [ Next, press the [ ] button. 3.
Setup and Reset Key Repeat Time Off Timer On/Off Control the response rate of a button when the button is pressed. You can set the product to automatically turn off. Configuring Key Repeat Time Configuring Off Timer On/Off 1. Press [m] on the product. 1. Press [m] on the product. 2. Move to SETUP&RESET using the [ Next, press the [ ] button. ], [ 3. Move to Key Repeat Time using the [ Next, press the [ ] button. The following screen will appear. 2.
Setup and Reset Off Timer Setting Reset The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. Return all the settings for the product to the default factory settings. NOTE NOTE Settings saved for Calibration mode are not changed after a reset. Available only when Off Timer On/Off is set to On. Configuring Off Timer Setting 1. Press [m] on the product. 2. Move to SETUP&RESET using the [ Next, press the [ ] button.
Chapter. 10 INFORMATION Menu and Others INFORMATION Configuring Color Mode in the Initial Screen View the current input source, frequency and resolution. Viewing information (INFORMATION) 1. Press [m] on the product. 2. Move to INFORMATION using the [ frequency and resolution will appear. ], [ ] buttons. The current input source, Configure the Color Mode using the [ 1. Press [ ] when the initial screen is displayed. The following screen will appear. 2.
INFORMATION Menu and Others Configuring Volume in the Initial Screen • Check that the DP or HDMI cable is properly connected. • Adjust the sound output port settings according to the conditions where the product is used. Control Panel → Sound → Speakers → Configure Speakers NOTE Available only when the input source is DisplayPort or HDMI. Adjust the Volume using the [ screen) is displayed. 1.
Configuring Brightness and Contrast in the Initial Screen NOTE Available only when the input source is DVI. Adjust the Brightness or Contrast using the [ displays no menu screen) is displayed. 1. Press [ ] buttons when the initial screen (that ] when the initial screen is displayed. The following screen will appear. Brightness Contrast Exit : : 100 75 Adjust 2. Adjust the Brightness and Contrast setting using the [ Enter ], [ ] buttons.
Chapter. 11 Installing the Software MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections. Installing the Software 1. Insert the installation CD into the CD-ROM drive. 2. Select the “MultiScreen” setup program. NOTE If the pop-up screen for the software installation does not appear on the main screen, find and doubleclick the “MultiScreen” setup file on the [CD-ROM]. 3. When the Installation Wizard appears, click [Next]. 4.
Chapter. 12 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test. 1.
Troubleshooting Guide Troubleshooting The message "Not Optimum Mode. " appears on the screen. Solutions This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product. Set the maximum resolution and frequency according to the product specifications referring to the Standard Signal Mode Table. The images on the screen look distorted. Check the cable connection to the product The screen is not clear. The screen is blurry.
Troubleshooting Guide Q&A Question Answer How can I change the frequency? Set the frequency on your graphics card. → Question Answer How do I set powersaving mode? • Windows XP: Set power-saving mode in Control Panel Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC. → → → → → → • Windows 7: Set power-saving mode in Control Panel Appearance and Personalization Personalize Saver Settings or BIOS SETUP on the PC.
Chapter. 13 Specifications General Ports Model Name S27B970D Size Panel Display area Pixel Pitch Synchronization Resolution USB (1UP/2DN(USB2.0)) Rear View DVI(Dual link), HDMI(MHL), DisplayPort Internal Speaker 7.0W X 2 (Channel) 27 inches (69 cm) 596.74 mm (H) x 335.66 mm (V) Dimensions (W x H x D) / Weight 23.49 inches (H) x 13.21 inches (V) 0.2333 mm (H) x 0.2333 mm (V) 0.009185 inches (H) x 0.
Specifications PowerSaver Preset Timing Modes The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Clock frequency (MHz) Sync Polarity (H/V) MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 960 60.000 60.000 108.000 +/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 1200 75.000 60.000 106.500 +/+ VESA, 1680 x 1050 65.290 59.954 146.
Chapter. 14 Appendix Contact SAMSUNG WORLD WIDE NOTE CHILE COLOMBIA If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. NORTH AMERICA U.S.A CANADA MEXICO 1-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 800-SAMSUNG (726-7864) From mobile 02-24 82 82 00 01-8000112112 Bogotá: 6001272 http://www.samsung.com/cl http://www.samsung.com/co http://www.samsung.
Appendix http://www.samsung.com/latin GUATEMALA 1-800-299-0013 EUROPE (Spanish) http://www.samsung.com/latin_en AUSTRIA (English) 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com/be http://www.samsung.com/latin HONDURAS 800-27919267 (Spanish) BELGIUM 02-201-24-18 http://www.samsung.com/latin_en 1-800-234-7267 http://www.samsung.com http://www.samsung.com/latin NICARAGUA 00-1800-5077267 (Spanish) 051 133 1999 http://www.samsung.
Appendix h t t p : / / w w w. s a m s u n g . c o m / c h 80111-SAMSUNG (80111 726 7864) only from land line (+30) 210 6897691 from mobile and land line http://www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com/lv LITHUANIA 8-800-77777 http://www.samsung.com/lt LUXEMBURG 261 03 710 http://www.samsung.
Appendix MENA ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com http://www.samsung.com/ae BAHRAIN 8000-4726 http://www.samsung.com/hk HONG KONG (852) 3698 4698 (Chinese) (Arabic) 08000-726786 http://www.samsung.com (English) IRAN 021-8255 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com/Levant 65777444 (English) 1800 3000 8282 1800 266 8282 http://www.samsung.com/in INDONESIA 0800-112-8888 021-5699-7777 http://www.
Appendix AFRICA ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.samsung.com CAMEROON 7095- 0077 http://www.samsung.com COTE D’ IVOIRE GHANA 8000 0077 0800-10077 0302-200077 Responsibility for the Pay Service (Cost to Customers) NOTE http://www.samsung.com When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. http://www.samsung.
Appendix Others • If product fails by natural disaster (lightning, fire, earthquake, flood damage, etc) • If consumable components are all used up (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp, Filter, Ribbon, etc.) NOTE If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first.
Terminology OSD(On Screen Display) frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second. The horizontal frequency is indicated in 85kHz. Vertical Frequency On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. One image is made of numerous horizontal lines.
Index Index A Auto Source D 49 B Blue Brightness 42 37 Display Time Dynamic Contrast K 49 37 50 L E Eco Saving Key Repeat Time 47 C F Checking the Contents 13 Cleaning 7 Color Mode 40 Color Temp.
P Parts PC/AV Mode Power Consumption PowerSaver U 15 48 60 60 Using MHL 28 V V-Position 45 Q Q&A 58 W What is Monitor Calibration? What is NCE (Natural Color Expert)? R 19 20 Red 41 Requirements Before Contacting Samsung Customer Service Center 56 Reset 51 Response Time 39 Responsibility for the Pay Service (Cost to Customers) 66 S Safety Precautions Sharpness Starting NCE (Natural Color Expert) 6 38 21 T Terminology 68 70
