User manual
15
Parts
Front Buttons
The color and shape of parts may differ from what is shown. Specications are subject to
change without notice to improve quality.
This is a touch-type button. Tap the button lightly with a nger.
This product contains a power circuit unit causing the stand to generate heat. The heat
does not mean the product is defective.
A
Speakers
Icons Description
Turn the power on or off.
The power indicator will be lit when the product is operating normally.
NOTE
• For details on the power-saving function, refer to “Power-saving Function” in the
product specications.
• To reduce power consumption, it is best to remove the power cable when not using
the product for an extended period of time.
m
This button can be used to display/exit from the OSD menu. The button can
also be used to go back to the previous menu.
To lock the OSD control, press and hold the [
m
] button for 10 seconds.
To unlock the OSD control, press and hold the [
m
] button for more than
10 seconds.
NOTE
If the OSD control is locked,
• Brightness, Contrast, Image Size can be adjusted, and INFORMATION can be
viewed.
Move down to another menu item or adjust a setting when the OSD menu is
displayed.
Congure the Color Mode using the [
] buttons when no OSD menu is
displayed.
NOTE
• For further details on Color Mode, refer to “Conguring Color Mode” in the section
"Conguring the Tint Settings."
Conrm a menu selection.
Pressing the [
] button when no OSD menu is displayed will change the
input source (DVI, HDMI/MHL, DisplayPort).
NOTE
A message that shows the current input source will appear at the top left corner of the
screen each time you turn on the power or press the [
] button to change the input
source.
Preparation