User manual

20
What is NCE (Natural Color Expert)?
The Natural Color Expert (hereinafter "NCE") program was developed by Samsung Electronics
to display optimized colors customized by users.
NOTE
• This product supports the monitor calibration feature through the internal NCE function and the provided
NCE program. (a calibrator can be purchased separately).
• The default calibration settings measured at the factory can be restored after the product is calibrated
using the NCE software.
Note that the default calibration settings measured at the factory may vary depending on the panel
characteristics. Panel characteristics can change according to operating time.
NCE Program Installation/Uninstallation
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the Natural Color Expert v3 installation program.
NOTE
If the software installation screen does not pop up on the main screen, go to CD-ROM
→
AutoPlay
→
Manual
→
NCE folder. Next, install using the Natural Color Expert v3 execution le.
3. If the “Natural Color Expert v3 InstallShield Wizard” screen appears, click "Next"
and "Install" in sequence.
4. Installation progress will be displayed.
5. Click “Finish” in the displayed "InstallShield Wizard Complete" screen.
6. The Natural Color Expert v3 shortcut icon will be created on the desktop after
installation.
NOTE
• The Natural Color Expert v3 execution icon may not be displayed depending on the PC system or
product specications.
• Press the F5 key (Refresh) if the execution icon does not appear.
Uninstallation
1. Go to Settings
→
Control Panel on the Start menu and double-click Add or Remove
Programs.
2. Select Natural Color Expert v3 from the list and click Change/Remove.
NOTE
Natural Color Expert v3 installation can be affected by the graphics card, mother board and network
conditions.
Using NCE (Natural Color Expert )