User manual

53
Conguring Volume in the Initial
Screen
NOTE
Available only when the input source is DisplayPort or HDMI.
Adjust the Volume using the [ ] buttons when the initial screen (that displays no menu
screen) is displayed.
1. Press [ ] when the initial screen is displayed. The following screen will appear.
Volume
100
:
Exit EnterAdjust
2. Adjust the Volume setting using the [ ], [ ] buttons.
If there is no sound output after adjusting the volume, do the following:
• Check that the DP or HDMI cable is properly connected.
• Adjust the sound output port settings according to the conditions where the product is
used.
Control Panel
→
Sound
→
Speakers
→
Congure Speakers
1
2
3
4
• Click the volume icon [
A
] on the Windows
taskbar to adjust the volume [
B
].
A
B
INFORMATION Menu and Others