User manual

55
MultiScreen
MultiScreen enables users to use the monitor by partitioning multiple sections.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the “MultiScreen” setup program.
NOTE
If the pop-up screen for the software installation does not appear on the main screen, nd and double-
click the “MultiScreen” setup le on the [CD-ROM].
3. When the Installation Wizard appears, click [Next].
4. Follow the instructions given on the screen to proceed with installation.
NOTE
• The software may not work properly if you do not restart the computer after the installation.
• The “MultiScreen” icon may not appear depending on the computer system and the product
specications.
• If the shortcut icon does not appear, press the “F5” key.
Restrictions and Problems with the Installation (MultiScreen)
The “MultiScreen” installation may be affected by the Graphics card, [Motherboard] and the
Networking environment.
Operating System
“OS”
• “Windows 2000”
• “Windows XP Home Edition”
• “Windows XP Professional”
• “Windows Vista 32bit”
• “Windows 7 32bit”
• “Windows 8 32bit”
NOTE
For “MultiScreen”, the operating systems “Windows 2000” or later is recommended.
“Hardware”
• At least 32MB of memory
• At least 60MB of free space on the hard disk drive
Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove
Programs].
Select “MultiScreen” from the program list and click the [Add/Delete] button.
Installing the Software
Chapter. 11