User Manual SE200 SE450 SE650 SERIES The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. The contents of this manual are subject to change without notice to improve quality. © Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Table of contents Before Using the Product Securing the Installation Space Precautions for storage 4 4 Safety Precautions Symbols Cleaning Electricity and Safety Installation Operation 4 5 5 5 6 7 Preparations Parts Frontal Buttons Reverse Side Right Side View (S**E450D*) Changing Brightness, Contrast and Sharpness settings Changing the Volume setting Adjusting the Product Tilt (SE200 Series) Adjusting the Product Tilt and Height (SE450, SE650 Series) Rotating the Monitor (SE450, SE650 Series) Anti-thef
Table of contents Setup and Reset Specifications Reset All 33 General 40 Smart Eco Saving 33 Standard Signal Mode Table 42 Off Timer (S19E200NW / S19E200NY / S22E200N / S22E200NY) 33 Off Timer Plus (Except S19E200NW / S19E200NY / S22E200N / S22E200NY) 34 PC/AV Mode (Except S19E200NW / S19E200NY / S22E200N / S22E200NY) 34 Key Repeat Time 34 Source Detection (Except S19E200NW / S19E200NY / S22E200N / S22E200NY) 34 INFORMATION 35 Appendix Responsibility for the Pay Service (Cost to Custom
Chapter 01 Before Using the Product Securing the Installation Space Precautions for storage Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ――The exterior may differ depending on the product. ――Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.
Symbols Electricity and Safety Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed. Warning •• Do not use a damaged power cord or plug, or a loose power socket. •• Do not use multiple products with a single power socket. •• Do not touch the power plug with wet hands. Cleaning ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Installation Warning Caution •• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• Do not drop the product while moving. •• Do not install the product in poorly ventilated spaces such as a bookcase or closet. •• Install the product at least 10 cm away from the wall to allow ventilation. •• Keep the plastic packaging out of the reach of children. ‒‒ Children may suffocate.
Operation Warning •• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒‒ Contact Samsung Customer Service Center for repairs. •• To move the product, first disconnect all the cables from it, including the power cable. •• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Center.
Caution •• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. •• Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc). ‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Chapter 02 Preparations Parts Icons Description Open or close the onscreen display (OSD) menu, or return to the parent menu. Frontal Buttons ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide SE200 Series, S**E450B*, S**E650B*, S**E450D* OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, button for 10 seconds.
Icons Reverse Side Description Confirm a menu selection. Pressing the button when the OSD menu is not displayed will change the input source (Analog / DVI / DisplayPort (S**E450D*)). If you power on the button, a message product or change the input source by pressing the that shows the changed input source will appear at the top left corner of the screen. notice to improve quality. Port Description Connect to a PC using a DP cable.
Right Side View (S**E450D*) ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect to a USB device. ――Applicable to the stand models that have USB ports only.
Changing Brightness, Contrast and Sharpness settings Changing the Volume setting Adjust the Brightness, Contrast and Sharpness setting using the no OSD menu is displayed). Adjust the Volume by pressing the buttons in the initial screen (where Sharpness 100 Brightness button when the Key Guide is displayed. Volume 10 Contrast ――The displayed image may differ depending on the model. ――The displayed image may differ depending on the model. ――The default brightness can vary depending on the region.
Adjusting the Product Tilt (SE200 Series) ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Adjusting the Product Tilt and Height (SE450, SE650 Series) ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1° (-2°/+1°) ~ 20° (0°/+2°) 19" ~ 24" 27" -3° (±2°) ~ +25° (±2°) -4° (±2°) ~ +25° (±2°) 19"~ 22" (without a USB port) 23" ~ 27" / 21.
Rotating the Monitor (SE450, SE650 Series) Anti-theft Lock ――The color and shape of parts may differ from what is shown. Specifications are subject to change without ――An anti-theft lock allows you to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide notice to improve quality. You can rotate your monitor as shown below. 1 2 provided with your anti-theft locking device for details.
Installing a Wall-mount Kit or Desktop Stand SE450, SE650 Series Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Before Installation ――Power the product off and remove the power cable from the power socket. SE200 Series Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Hold the main body of the product with your hand as shown by the figure.
Installing a Wall-mount Kit or Desktop Stand •• Notes ‒‒ Using a screw longer than the standard length can damage the internal components of the product. SE200 Series 2 1 ‒‒ The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. ‒‒ Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury.
•• Notes SE450, SE650 Series ‒‒ Using a screw longer than the standard length can damage the internal components of the product. ‒‒ The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. ‒‒ Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury.
Installation Attaching the Stand (SE200 Series) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. 1 Insert the Stand Connector into the Stand in the direction shown by the figure. 2 Check if the Stand Connector is firmly connected. 3 Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Attaching the Stand (SE450, SE650 Series) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. ――Disassembly is the reverse order of assembly. 1 Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. 5 After installing the stand, place the product upright.
Removing the Stand (SE200 Series) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. 1 Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards.
Chapter 03 Connecting and Using a Source Device Read below before installing the monitor. Connecting and Using a PC 1 Check the shapes of both ends of the cables that came with the monitor, and check the shapes and Select a connection method suitable for your PC. 2 Before connecting signal cables, disconnect the power cables for the monitor and external devices ――Provided ports may vary depending on the product.
Connection Using the DVI Cable Connection Using the DVI-HDMI Cable Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. DVI IN DVI IN Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. DVI IN ――The DVI IN terminal is supplied for the digital (DVI)-dedicated models only.
Connecting to Headphones or Speakers (S**E450M*) Connecting the Power IN POWER IN OUT To use the product, connect the power cable to a power outlet and the POWER IN port on the product. ――The input voltage is switched automatically. ――Applicable to the models that have speakers only.
Connecting a USB device (S**E450D*) 1 Connect the ――To use ――Applicable to the stand models that have USB ports only. ――You can use a USB device such as a mouse, keyboard, memory stick or external hard disk drive (HDD) by port of the monitor and the USB port of the computer with the USB cable. port, you have to connect the UP (Upstream Cable) to the PC. ――Make sure to use the USB cable supplied with this monitor to connect the monitor's port and your computer's USB port.
Correct posture to use the product Driver Installation ――You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ――To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Chapter 04 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Contrast Adjust the contrast between the objects and background.
Eye Saver Mode SAMSUNG MAGIC Bright Set to an optimum picture quality suitable for eye relaxation. This menu provides an optimum picture quality suitable for the environment where the product will be used. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation.
SAMSUNG MAGIC Angle (Except S19E200NY / S22E200NY / S24E650BW) MAGICAngle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. SAMSUNG ――This menu is not available when SAMSUNG Bright is set to Cinema or Dynamic Contrast mode. MAGIC SAMSUNG MAGIC Upscale MAGICUpscale function SAMSUNG can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures.
Image Size (Except S19E200BR / S19E450BR / S19E450MR) Change the picture size. In PC mode •• Auto: Display the picture according to the aspect ratio of the input source. Response Time (S24E650BW) Accelerate the panel response rate to make video appear more vivid and natural. ――It is best to set Response Time to Standard or Faster when you are not viewing a movie. H-Position & V-Position •• Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
Chapter 05 Configuring Tint A detailed description of each function is provided. Refer to your product for details. SAMSUNG Bright is in Cinema or Web mode, Dynamic Contrast mode. This menu is not available when Game Mode or Eye Saver Mode is enabled. Adjust the tint of the screen. This menu is not available when MAGIC ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown.
Color Tone Adjust the general color tone of the picture. ――This menu is not available when SAMSUNGAngle is enabled. MAGIC •• Cool 2: Set the color temperature to be cooler than Cool 1. •• Cool 1: Set the color temperature to be cooler than Normal mode. •• Normal: Display the standard color tone. •• Warm 1: Set the color temperature to be warmer than Normal mode. •• Warm 2: Set the color temperature to be warmer than Warm 1. •• Custom: Customize the color tone.
Chapter 06 Resizing or Relocating the Screen A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Language Menu V-Position: Move the menu position up or down.
Chapter 07 Setup and Reset A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Reset All Return all the settings for the product to the default factory settings.
Off Timer Plus (Except S19E200NW / S19E200NY / S22E200N / S22E200NY) Configuring Off Timer Off Timer: Turn on Off Timer mode. Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. ――This option is only available when Off Timer is set to On. ――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers on.
INFORMATION View the current input source, frequency and resolution. PICTURE COLOR MENU SETTINGS SETUP&RESET INFORMATION INFORMATION LS********/** S / N : *************** Analog **kHz **Hz ** ****x**** Optimal Mode ****x**** **Hz ――The displayed image may differ depending on the model.
Chapter 08 Installing the Software MultiScreen System Requirements OS Hardware •• Windows™ 2000 •• At least 32MB of memory •• Windows XP Home Edition •• At least 60MB of free space on the hard disk drive •• Windows XP Professional MultiScreen enables users to use the monitor by partitioning multiple sections. ――The software may not work properly if you do not restart the computer after the installation.
Chapter 09 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center ――Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check the following. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
The screen is not clear. The screen is blurry. Sound issue Adjust Coarse and Fine. Remove any accessories (video extension cable, etc.) and try again. There is no sound. Set the resolution and frequency to the recommended level. Check the connection of the audio cable or adjust the volume. The screen appears unstable and shaky. There are shadows or ghost images left on the screen.
Q&A ――Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. •• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings. •• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings.
Chapter 10 Specifications General Model Name S19E200NY S19E200NW / S19E200BW / S19E450BW / S19E450MW S19E200BR / S19E450BR / S19E450MR S22E200NY / S22E200B / S22E200N / S22E450B / S22E450M / S22E450D Size 19 CLASS (18.5 inches / 47.0 cm) 19 CLASS (19.0 inches / 48.1 cm) 19 CLASS (19.0 inches / 48.2 cm) 22 CLASS (21.5 inches / 54.6 cm) Display area 409.8 mm (H) x 230.4 mm (V) 408.24 mm (H) x 255.15 mm (V) 376.32 mm (H) x 301.06 mm (V) 476.64 mm (H) x 268.11 mm (V) 16.1 Inches (H) x 9.
Model Name S24E650BW S27E450B / S27E450D Size 24 CLASS (24.0 inches / 61.1 cm) 27 CLASS (27.0 inches / 68.5 cm) Display area 518.4 mm (H) x 324.0 mm (V) 597.6 mm (H) x 336.15 mm (V) 20.4 Inches (H) x 12.8 Inches (V) 23.5 Inches (H) x 13.2 Inches (V) 0.270 mm (H) x 0.270 mm (V) 0.3114 mm (H) x 0.3114 mm (V) 0.01063 Inches (H) x 0.01063 Inches (V) 0.01226 Inches (H) x 0.01226 Inches (V) Pixel Pitch Power Supply This product uses 100 to 240 V.
Standard Signal Mode Table Model Name Synchronization Resolution Optimum Resolution Maximum Resolution 1366 x 768 @ 60 Hz 1366 x 768 @ 60 Hz S19E200NW / S19E200BW / S19E450BW / S19E450MW 1440 x 900 @ 60 Hz 1440 x 900 @ 75 Hz S19E200BR / S19E450BR / S19E450MR 1280 x 1024 @ 60 Hz 1280 x 1024 @ 75 Hz S22E200BW / S22E450BW / S22E450MW / S22E450DW 1680 x 1050 @ 60 Hz 1680 x 1050 @ 60 Hz S22E200B / S23E200B / S24E200BL / S22E200NY / S22E200N / S22E450B / S22E450M / S22E450D / S23E450B / S24E450BL /
S19E200NY Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.
S19E200NW / S19E200BW / S19E450BW / S19E450MW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
S19E200BR / S19E450BR / S19E450MR Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
S22E200NY / S22E200N / S22E200B / S23E200B / S24E200BL / S22E450B / S22E450M / S22E450D / S23E450B / S24E450BL / S24E450DL / S24E450B / S24E450M / S24E450D / S27E450B / S27E450D Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.
S22E200BW / S22E450BW / S22E450MW / S22E450DW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
S24E650BW Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1440 x 900 55.935 59.887 106.
Chapter 11 Appendix Responsibility for the Pay Service (Cost to Customers) A Product damage caused by customer's fault ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service •• External impact or drop. technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.
Extended warranty You can buy an extended warranty within 90 days of purchasing the product. The extended warranty will cover an additional period of 3 years, beyond the standard 3 year warranty. Samsung guarantee that replacement parts will be available for 5 years after the end of production. After 5 years, in the event that the Samsung’s service center has run out of replacement parts and cannot repair the product, Samsung will replace your product at no additional charge.