Monitor User Manual S32E590C The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table of contents Before Using the Product Wall Mount Kit Specifications (VESA) Copyright 4 Securing the Installation Space Precautions for storage 5 5 Safety Precautions Symbols Cleaning Electricity and Safety Installation Operation 5 5 6 6 7 9 Correct posture to use the product 12 Preparations Checking the Components Components 13 13 Parts Control Panel Direct Key guide Function Key Guide Reverse Side 14 14 15 16 18 Installation Attaching the Stand Removing the Stand Adjusting the Product Ti
Table of contents Setup and Reset Information Menu and Others Sound Configuring Volume Configuring Sound Mode Configuring Select Sound 45 45 46 47 Eco Saving Plus Configuring Eco Saving Plus 48 48 Off Timer Configuring Off Timer Configuring Turn Off After 49 49 50 PC/AV Mode Configuring PC/AV Mode 51 51 DisplayPort Ver. Configuring DisplayPort Ver.
Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. ⓒ 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Securing the Installation Space Safety Precautions Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ――The exterior may differ depending on the product. Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. 10 cm (3.
Cleaning Electricity and Safety ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. ――Take the following steps when cleaning. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. 1 Power off the product and computer. 2 Disconnect the power cord from the product.
Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object. Hold the plug when disconnecting the power cord from the power socket. •• An electric shock or fire may result. •• Damage to the cord may result in a fire or electric shock. ! Do not place the power cord or product near heat sources. •• A fire or electric shock may result. Installation Warning Clean any dust around the pins of the power plug or the power socket with a dry cloth.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) Caution •• The product may fall and become damaged and/or cause an injury. Do not drop the product while moving. •• Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. •• Product failure or personal injury may result.
Operation Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product. •• The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. During a lightning or thunderstorm, power off the product and remove the power cable. •• A fire or electric shock may result. •• A fire or electric shock may result.
Do not use or keep combustible spray or an inflammable substance near the product. Caution •• An explosion or fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! Ensure the vents are not blocked by tablecloths or curtains. •• Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time.
Do not put the DC power adapter near to any heating apparatus. Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. •• Otherwise, a fire may result. Keep the DC power adapter in a well-ventilated area. Store small accessories out of the reach of children. ! ! Do not hold the product upside-down or move it by holding the stand. Exercise caution when adjusting the product angle or stand height.
Correct posture to use the product Use the product in the correct posture as follows: •• Straighten your back. •• Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. •• Adjust the angle so light does not reflect on the screen. •• Keep your forearms perpendicular to your upper arms and level with the back of your hands. •• Keep your elbows at about a right angle.
Chapter 02 Preparations Checking the Components -- Contact the vendor where you purchased the product if any components are missing. Components ――Components may vary depending on the country. -- The appearance of the components may differ from the images shown. -- The optimal resolution may not be available when using a non-high speed HDMI or HDMI-DVI cable. Quick Setup Guide Warranty card (Not available in some locations) Regulatory guide Power cable (P.27) DC power adapter (Detachable) (P.
Parts Control Panel ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. JOG Button Function Key Guide UP PRESS(ENTER) Icons RIGHT LEFT 2 DOWN Return Description JOG Button Function Key Guide Multi directional button that helps navigate. ――The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter.
Direct Key guide ――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. •• UP/DOWN: Adjust Brightness, Contrast, Sharpness. Brightness Volume •• LEFT/RIGHT: Adjust Volume, Mute. •• PRESS(ENTER): Display Function Key Guide. ――The function buttons page shows if Eye Saver Mode is enabled.
Function Key Guide UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. ――To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. PRESS(ENTER): The selected item will be applied. Icons Description Selects to change the input signal by moving the JOG button in the Function Key Guide screen.
――When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button UP Power saving/Non-signal mode Source Change Down PRESS(ENTER) for 2 seconds Power Off ――When the monitor displays the Main menu the JOG Button could be used as below. JOG Button UP/DOWN Action Move the option Exit the Main menu. LEFT Close Sublist without saving value. Value decreases in the slider. RIGHT PRESS(ENTER) Move to next depth.
Port Reverse Side ――The color and shape of parts may differ from what is shown. Specifications are Description Connects to a PC using a DP cable. subject to change without notice to improve quality. Connects to a source device using an HDMI cable or HDMI-DVI cable. Connect to an audio output device such as headphones. 2 Connects to the DC power adapter.
Installation Attaching the Stand ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. 1 Insert the stand neck into the stand base in the direction shown in the figure.
Removing the Stand ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. 1 Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image.
Adjusting the Product Tilt ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 0˚ (±2˚) ~ 15˚ (±2˚) •• You can adjust the product tilt. •• Hold the lower part of the product and adjust the tilt carefully.
Anti-theft Lock ――An anti-theft lock allows you to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit allows you to mount the product on the wall. Purchase a compatible wall-mount kit to use with the product. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket.
Wall Mount Kit Specifications (VESA) •• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications. ――Install your wall mount on a solid wall perpendicular to the floor. Before •• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Chapter 03 Connecting and Using a Source Device Before Connecting Connecting and Using a PC Check the following before you connect this product with other devices. Select a connection method suitable for your PC. ――Connecting parts may differ in different products. Pre-connection Checkpoints ――Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.
Connection Using an HDMI-DVI Cable Connection Using the DP Cable ――Do not connect the power cable before connecting all other cables. ――Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. Ensure you connect a source device first before connecting the power cable. ――A DP cable shorter under 1.5m in length is recommended. Using a cable longer than 1.5m can affect the picture quality.
Connecting to Headphones or Speakers ――Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. Connecting the Power Power connection using detachable DC power adapter 2 1 2 2 3 1 Connect an audio output device such as headphones to port on the product. ――Provided ports may vary depending on the product. 1 Connect the power cable to the DC power adapter.
Driver Installation Setting Optimum Resolution ――You can set the optimum resolution and frequency for this product by installing the corresponding An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. drivers. ――To install the latest version of the product driver, download it from the Samsung Electronics website Select a language on the product and change the resolution on your PC to the optimum setting. at http://www.
Chapter 04 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. SAMSUNG MAGIC Bright Configuring SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. You can customize the brightness to suit your preferences. ――This menu is not available when Eco Saving Plus is enabled. ――This menu is not available when Game Mode is enabled.
In AV mode Picture SAMSUNG MAGIC Bright Dynamic Brightness Standard Contrast Movie Sharpness Custom Set to an optimum picture quality suitable for the working environment. •• Dynamic: Select this mode to view a sharper image than in Standard mode. •• Standard: Select this mode when the surroundings are bright. This also provides a sharp image. •• Movie: Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
Brightness Configuring Brightness 1 When the Function Key Guide appears, select A higher value will make the picture appear brighter. SAMSUNG ――This menu is not available when MAGIC Bright is set to Dynamic Contrast 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Brightness controlling the JOG button UP/DOWN and press the JOG button. ――This menu is not available when Eye Saver Mode is enabled. 4 Adjust the Brightness controlling the JOG button LEFT/RIGHT.
Contrast Configuring Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG ――This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. Picture SAMSUNG MAGIC Bright Brightness Custom 100 Contrast 75 Sharpness 60 Adjust the contrast level. Values closer to 100 mean a bigger light/dark contrast.
Sharpness Configuring Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG ――This option is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. Picture SAMSUNG MAGIC Bright Brightness Custom 100 Contrast 75 Sharpness 60 Adjust the sharpness of the picture. Values closer to 100 mean a sharper image.
Color Configuring Color A detailed description of each function is provided. Refer to your product for details. SAMSUNG ――Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. ――This menu is not available when Eye Saver Mode is enabled. 1 When the Function Key Guide appears, select 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
HDMI Black Level Configuring the HDMI Black Level Settings If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. ――This function is only available in HDMI 1 or HDMI 2 mode.
Eye Saver Mode Configuring Eye Saver Mode Set to an optimum picture quality suitable for eye relaxation. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will become lower and lower, and one hour later it will approach the optimum picture quality suitable for eye relaxation.
Game Mode Configuring Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. ――This menu is not available when Eye Saver Mode is enabled. Picture Optimizes image settings for playing games. 1 When the Function Key Guide appears, select 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
Response Time Configuring the Response Time Accelerate the panel response rate to make video appear more vivid and natural. ――It is best to set Response Time to Standard or Faster when you are not viewing a movie. Picture Game Mode Response Time Standard Picture Size Faster Screen Adjustment Fastest Accelerate the panel response rate to make video appear more vivid and natural.
Picture Size Changing the Picture Size Change the picture size. In PC mode Picture Game Mode Off Response Time Picture Size Auto Screen Adjustment Wide Choose the size and aspect ratio of the picture displayed on screen. 1 When the Function Key Guide appears, select 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Picture Size controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP. Next, press the JOG button.
In AV mode In AV mode •• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. Picture Game Mode Off Response Time Choose the size and aspect ratio of the picture displayed on screen. •• 16:9: Display the picture with an aspect ratio of 16:9. •• Screen Fit: Display the picture with the original aspect ratio without cutting off. ――The function may not be supported depending on the ports provided with the product.
Screen Adjustment Configuring H-Position & V-Position H-Position: Move the screen to the left or right. ――This menu is only available when Picture Size is set to Screen Fit in AV Mode. V-Position: Move the screen up or down. ――When a 480P or 576P or 720P or 1080P signal is input in AV mode and the 1 When the Function Key Guide appears, select 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
Chapter 05 Coordinating OSD A detailed description of each function is provided. Refer to your product for details. Transparency Changing Transparency Set the transparency for the menu windows. OnScreen Display Transparency Off Language On 한국어 Configure the transparency of the menu windows. 1 When the Function Key Guide appears, select 2 Move to OnScreen Display controlling the JOG button UP/DOWN and press the JOG button.
Language Configuring Language Set the menu language. ――A change to the language setting will only be applied to the onscreen menu display. ――It will not be applied to other functions on your PC. OnScreen Display Transparency Deutsch Language English Display Time Español Set the menu language. 1 When the Function Key Guide appears, select 2 Move to OnScreen Display controlling the JOG button UP/DOWN and press the JOG button.
Display Time Configuring Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. OnScreen Display On Transparency Language Display Time 5 sec Set how long the menu window will remain on screen for when it is not in use.
Chapter 06 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Sound Configuring Volume System Sound Off Eco Saving Plus Off Timer PC/AV Mode 1.2 DisplayPort Ver. Source Detection Auto Key Repeat Time Acceleration 1 When the Function Key Guide appears, select 2 Move to System controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Sound controlling the JOG button UP/DOWN and press the JOG button.
Configuring Sound Mode 1 When the Function Key Guide appears, select ――Applicable when speakers are connected. 2 Move to System controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Sound controlling the JOG button UP/DOWN and press the JOG button. 4 Move to Sound Mode controlling the JOG button UP/DOWN and press the JOG button. Sound Volume Sound Mode Standard Select Sound Music by moving the JOG button UP. Next, press the JOG button.
Configuring Select Sound Sound 50 Volume Sound Mode Select Sound Stereo Left Channel 1 When the Function Key Guide appears, select 2 Move to System controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Sound controlling the JOG button UP/DOWN and press the JOG button. 4 Move to Select Sound controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP. Next, press the JOG button. •• Stereo: Enable the sound both from the left and right speakers.
Eco Saving Plus Configuring Eco Saving Plus The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG ――This option is not available when MAGIC Bright is in Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. ――This menu is not available when Eye Saver Mode is enabled. System Sound Eco Saving Plus Off Off Timer Auto PC/AV Mode Low DisplayPort Ver.
Off Timer Configuring Off Timer You can set the product to automatically turn off. System Enable or disable the Off Timer. Sound Eco Saving Plus Off 1 When the Function Key Guide appears, select 2 Move to System controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Off Timer controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP. Next, press the JOG button. •• Off: Deactivate the off timer so that the product does not power off automatically.
Off Timer Off Timer Off Turn Off After 4h Set the monitor to automatically turn off after a certain time period. Return -- The displayed image may differ depending on the model. Configuring Turn Off After ――This option is only available when Off Timer is set to On. 1 When the Function Key Guide appears, select 2 Move to System controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Off Timer controlling the JOG button UP/DOWN and press the JOG button.
――Supplied for the wide models only such as 16:9 or 16:10. PC/AV Mode ――If the monitor is in HDMI 1, HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates, press the JOG button to display the function-button screen and then select the icon. You can select PC or AV. Set PC/AV Mode to AV. The picture size will be enlarged. Configuring PC/AV Mode This option is useful when you view a movie. System Set to AV to enlarge the picture.
――Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications. DisplayPort Ver. ――If the monitor is in HDMI 1, HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates, press the JOG button to display the function-button screen and then select the Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2. System Sound Eco Saving Plus Off Off Timer Configuring DisplayPort Ver.
Source Detection Configuring Source Detection You can activate Source Detection. System Decide how input sources will be detected. Sound Eco Saving Plus Off Key Repeat Time 2 Move to System controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Source Detection controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP. Next, press the JOG button. •• Manual: Manually select an input source.
Key Repeat Time Configuring Key Repeat Time Control the response rate of a button when the button is pressed. System Sound Off Eco Saving Plus Configure the response rate of a button when the button is pressed. Off Timer PC/AV Mode DisplayPort Ver. Source Detection Key Repeat Time Acceleration 1 sec 2 sec 자동 가속반복 No Repeat 1 When the Function Key Guide appears, select 2 Move to System controlling the JOG button UP/DOWN and press the JOG button.
Power LED On Configuring Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product. System Power LED On Working Reset All Stand-by Set the status of the power LED. 1 When the Function Key Guide appears, select 2 Move to System controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Power LED On controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP. Next, press the JOG button.
Reset All Initializing Settings (Reset All) Return all the settings for the product to the default factory settings. System Stand-by Power LED On Reset All Return all the settings for the product to the default factory settings. 1 When the Function Key Guide appears, select 2 Move to System controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Reset All controlling the JOG button UP/DOWN and press the JOG button.
Chapter 07 Information Menu and Others A detailed description of each function is provided. Refer to your product for details. Information Displaying Information View the current input source, frequency and resolution. Information Picture 1 When the Function Key Guide appears, select 2 Move to Information controlling the JOG button UP/DOWN and press the JOG button. The current input source, by moving the JOG button UP. Next, press the JOG button. frequency and resolution will appear.
Configuring Brightness, Contrast and Sharpness from the Initial Screen Brightness SAMSUNG ――This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. ――This menu is not available when Eco Saving Plus is enabled. You can adjust Brightness, Contrast or Sharpness by moving the JOG button up or down, if no OSD menu is displayed. ――This menu is not available when Game Mode is enabled. Sharpness Brightness Contrast -- The displayed image may differ depending on the model.
Configuring Volume in the Initial Screen Adjust the Volume by moving the JOG button when the Direct Key Guide is displayed on the screen. 50 Volume Mute 1 Adjust the Volume controlling the JOG button LEFT/RIGHT. ――If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the sound or cause choppy audio when applying the headphones or speakers.
Chapter 08 Installing the Software Easy Setting Box Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. Installing the Software 1 To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at http://www.samsung.com. 2 Select the Easy Setting Box setup Program. 3 When the Installation Wizard appears, click Next. 4 Follow the instructions given on the screen to proceed with installation.
Chapter 09 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. If the screen remains blank, check the PC system, video controller and cable. Testing the Product Check if your product is operating normally by using the product test function.
Check the following. Installation issue (PC mode) Issues Solutions The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the screen have nothing to do with the product. Blank spaces on the screen are caused by the PC or graphics card.
Issues The screen is not clear. The screen is blurry. Solutions Remove any accessories (video extension cable, etc.) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product. Next, if required, change the settings, referring to Standard Signal Mode Table (P.
Sound issue Issues There is no sound. Solutions Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software Program. Video is available but there is no sound. Sound cannot be heard if a HDMI-DVI cable is used to connect the input device. Connect the device using an HDMI cable or a DP cable.
Q&A Refer to the user manual for your PC or graphics card for further instructions on adjustment. Question How can I change the frequency? Answer Set the frequency on your graphics card. •• Windows XP: Go to Control Panel Appearance and Themes Display Advanced Monitor, and adjust Refresh rate under Monitor settings. •• Windows ME/2000: Go to Control Panel Display adjust Refresh rate under Monitor settings.
Question How do I set power-saving mode? Answer •• Windows XP: Set power-saving mode in Control Panel Screen Saver Settings or BIOS SETUP on the PC. Appearance and Themes •• Windows ME/2000: Set power-saving mode in Control Panel Settings or BIOS SETUP on the PC. Display Display Screen Saver •• Windows Vista: Set power-saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC.
Chapter 10 Specifications - General Size Model Name Panel - S32E590C Size 32 Class (31.5 Inches / 80 cm) Display area 698.40 mm (H) x 392.85 mm (V) 27.5 Inches (H) x 15.5 Inches (V) Display area H Pixel Pitch 0.36375 mm (H) x 0.36375 mm (V) 0.014321 Inches (H) x 0.014321 Inches (V) V Dimensions (W x H x D) / Weight Without Stand 28.7 x 16.7 x 3.6 Inches / 13.2 lbs With Stand - 729.1 x 425.1 x 90.6 mm / 6.0 kg 729.1 x 523.9 x 214.3 mm / 6.9 kg 28.7 x 20.6 x 8.4 Inches / 15.
Model Name S32E590C Signal connectors Environmental conditions HDMI, DP Port Operating Temperature: 50 F – 104 F (10 C – 40 C) Humidity: 10 % – 80 %, non-condensing Storage Temperature: -4 F – 113 F (-20 C – 45 C) Humidity: 5 % – 95 %, non-condensing ――Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically.
PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersaving mode only functions when the product is connected to a PC with a power-saving function.
Standard Signal Mode Table -- This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
-- Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. -- Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
Chapter 11 Appendix Responsibility for the Pay Service (Cost to Customers) ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.
Terminology OSD (On Screen Display)____ On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma____ The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
