LCD Monitor User Manual S34E790C The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table of contents Before Using the Product Copyright 5 Connecting and Using a Source Device Screen Setup Securing the Installation Space Precautions for storage 6 6 Before Connecting Pre-connection Checkpoints Safety Precautions Symbols Cleaning Electricity and Safety Installation Operation 6 6 7 7 8 10 Connecting and Using a PC Connection Using the HDMI Cable Connection Using the DP Cable Connecting to Headphones or Speakers Connecting the Power Tidying Up the Connected Cables 23 23 24 24 25 26
Table of contents Screen Adjustment Setup and Reset Image Size Changing the Image Size 39 39 H-Position & V-Position Configuring H-Position & V-Position 41 41 PIP/PBP Configuring PIP/PBP Mode Configuring Size Configuring Position Configuring Sound Source Configuring Source Configuring Image Size Configuring Contrast 42 43 44 45 46 47 49 52 Coordinating OSD Language Configuring Language 54 54 Display Time Configuring Display Time 55 55 Transparency Changing Transparency 56 56 Information Menu a
Table of contents Specifications General 80 PowerSaver 82 Standard Signal Mode Table 83 Appendix Contact SAMSUNG WORLD WIDE 85 Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others 88 88 88 88 Terminology 89 4
Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. ⓒ 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Securing the Installation Space Safety Precautions Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ――The exterior may differ depending on the product. Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. 10 cm (3.
Cleaning Electricity and Safety ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. ――Take the following steps when cleaning. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. 1 Power off the product and computer. 2 Disconnect the power cord from the product.
Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object. Hold the plug when disconnecting the power cord from the power socket. •• An electric shock or fire may result. •• Damage to the cord may result in a fire or electric shock. ! Do not place the power cord or product near heat sources. •• A fire or electric shock may result. Installation Warning Clean any dust around the pins of the power plug or the power socket with a dry cloth.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) Caution •• The product may fall and become damaged and/or cause an injury. Do not drop the product while moving. •• Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. •• Product failure or personal injury may result.
Operation Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product. •• The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. During a lightning or thunderstorm, power off the product and remove the power cable. •• A fire or electric shock may result. •• A fire or electric shock may result.
Do not use or keep combustible spray or an inflammable substance near the product. Caution •• An explosion or fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! Ensure the vents are not blocked by tablecloths or curtains. •• Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time.
Do not put the DC power adapter near to any heating apparatus. Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. •• Otherwise, a fire may result. Keep the DC power adapter in a well-ventilated area. Store small accessories out of the reach of children. ! ! Do not hold the product upside-down or move it by holding the stand. Exercise caution when adjusting the product angle or stand height.
Correct posture to use the product Use the product in the correct posture as follows: •• Straighten your back. •• Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. •• Adjust the angle so light does not reflect on the screen. •• Keep your forearms perpendicular to your upper arms and level with the back of your hands. •• Keep your elbows at about a right angle.
Chapter 02 Preparations Checking the Components -- Contact the vendor where you purchased the product if any components are missing. Components ――Components may vary depending on the country. -- The appearance of the components may differ from the images shown. -- Recommend to use the HDMI cable and DP cable which is provided by the supplier. -- The optimal resolution may not be available when using a non-high speed HDMI or HDMI-DVI cable.
Parts Control Panel ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. JOG Button Function Key Guide UP LEFT PRESS(ENTER) RIGHT DOWN Return Icons Description JOG Button Function Key Guide Multi directional button that helps navigate. ――The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter.
Direct Key guide ――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. UP/DOWN: Adjust Brightness, Contrast, Sharpness. Brightness Volume LEFT/RIGHT: Adjust Volume. PRESS(ENTER): Display Function Key Guide. ――The function buttons page shows if Game Mode is enabled.
Function Key Guide ――To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied. Icons Description Selects to change the input signal by moving the JOG button in the Function Key Guide screen.
――When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button UP Power saving/Non-signal mode Source Change Down PRESS(ENTER) for 2 seconds Power Off ――When the monitor displays the Main menu the JOG Button could be used as below. JOG Button UP/DOWN Action Move the option Exit the Main menu. LEFT Close Sublist without saving value. Value decreases in the slider. RIGHT PRESS(ENTER) Move to next depth.
Reverse Side ――The color and shape of parts may differ from what is shown. Specifications are Port Description Connects to the DC power adapter. subject to change without notice to improve quality. Connects to a source device using an HDMI cable or HDMI-DVI cable. Connects to a PC using a DP cable. Connects to a PC using a USB cable. ――This port can only connect to a PC. Connect to an audio output device such as headphones.
Installation Adjusting the Product Tilt and Height ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -2˚(±2.0˚) ~ 20˚(±2.0˚) 100 mm ± 2.0 mm •• The monitor tilt and height can be adjusted. •• To avoid damage to the product when adjusting the tilt, push or pull the top area of the product at the center while holding the top of the stand.
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Caution Take extra care to ensure your hand does not get stuck in the height adjustment area. This could injure your hand. Do not put the hand below the stand body. Do not hold the product upside down only by the stand.
Anti-theft Lock ――An anti-theft lock allows you to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: 1 Fix the cable of your anti-theft locking device to a heavy object such as a desk. 2 Put one end of the cable through the loop on the other end.
Chapter 03 Connecting and Using a Source Device Before Connecting Connecting and Using a PC Check the following before you connect this product with other devices. Select a connection method suitable for your PC. ――Connecting parts may differ in different products. Pre-connection Checkpoints ――Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.
Connection Using the DP Cable Connecting to Headphones or Speakers ――Do not connect the power cable before connecting all other cables. ――Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. DP IN 1 Connect the DP cable to the DP IN port on the back of the product and the DP port on the PC. 2 Connect the DC power adapter to the product and a power socket.
Connecting the Power Power connection using detachable DC power adapter 1 2 3 1 Connect the power cable to the DC power adapter. Then, connect the DC power adapter to the DC 22V port on the back of the product. 2 Next, connect the power cable to the power outlet. 3 Press the JOG button on the back of the monitor to turn it on. ――The input voltage is switched automatically.
Tidying Up the Connected Cables 1 To remove the COVER-CABLE, hold and pull the COVER-CABLE with your thumb and index finger in the arrow direction while holding the stand with the other hand. 4 Hold the bottom of the stand neck securely with your left hand and use the thumb of your right hand to slide up the COVER-CABLE to fix it in place. 2 Insert and fix the cables in the slot. 5 Installation is finished. 3 Hold the COVER-CABLE and fix the cables into the grooves on the STAND-REAR.
Connecting the Product to a PC as a USB HUB Connecting a PC to the Product ――The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC. To use the product as a USB hub, connect the product to a PC using a USB cable. Connect the USB cable to on the back of the product and USB on the PC. ――A USB 2.0 cable can be used to connect the product to a PC.
Utilizing the Product as a USB HUB Using the product as a hub, connect and use various source devices with the product at the same time. A PC cannot connect to multiple source devices at the same time as it has a limited number of input/output ports available. The HUB feature on the product will improve your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC.
Driver Installation Setting Optimum Resolution ――You can set the optimum resolution and frequency for this product by installing the corresponding An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. drivers. ――An installation driver is contained on the CD supplied with the product. Select a language on the product and change the resolution on your PC to the optimum setting.
Chapter 04 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. Brightness Configuring Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG ――This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. ――This menu is not available when Eco Saving is set .
Contrast Configuring Contrast 1 When the Function Key Guide appears, select A higher value will increase the contrast to make the object appear clearer. SAMSUNG ――This option is not available when MAGIC Bright is in Cinema or Dynamic 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Contrast controlling the JOG button UP/DOWN and press the JOG button.
Sharpness Configuring Sharpness 1 When the Function Key Guide appears, select A higher value will make the outline of objects clearer. SAMSUNG ――This option is not available when MAGIC Bright is in Cinema or Dynamic 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Sharpness controlling the JOG button UP/DOWN and press the JOG button. ――Not available when PIP/PBP Mode is set to On. 4 Adjust the Sharpness controlling the JOG button LEFT/RIGHT.
Game Mode Configuring Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. Picture Brightness 100 75 Contrast Sharpness Game Mode SAMSUNG MAGIC Bright Color Off On Always On Optimizes image settings for playing games. 1 When the Function Key Guide appears, select 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
SAMSUNG MAGIC Bright Configuring SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. ――This menu is not available when Eco Saving is enabled. ――This menu is not available when Game Mode is enabled. ――Not available when PIP/PBP Mode is set to On.
Picture 100 Brightness 75 Contrast Sharpness Game Mode SAMSUNG MAGIC Bright Color HDMI Black Level Dynamic Standard Movie Custom Set to an optimum picture quality suitable for the working environment. SAMSUNG When the external input is connected through HDMI/DP and PC/AV Mode is set to AV, MAGIC Bright has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom.
Color Configuring Color A detailed description of each function is provided. Refer to your product for details. SAMSUNG ――Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. ――Not available when PIP/PBP Mode is set to On. 1 When the Function Key Guide appears, select 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
HDMI Black Level Configuring the HDMI Black Level Settings If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. ――This function is only available in HDMI 1 or HDMI 2 mode.
Response Time Configuring the Response Time Accelerate the panel response rate to make video appear more vivid and natural. ――It is best to set Response Time to Standard or Faster when you are not viewing a movie. ――This menu is not available when PIP/PBP Mode is set to On and the Size is set to / / (PIP Mode). 1 When the Function Key Guide appears, select 2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
Chapter 05 Screen Adjustment Image Size Changing the Image Size Change the picture size. ――This menu is not available when PIP/PBP Mode is set to On and the Size is set to (PBP Mode). In PC mode Screen Image Size Auto H-Position Wide Choose the size and aspect ratio of the picture displayed on screen. 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button.
In AV mode In AV mode •• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. Screen Image Size 4:3 H-Position 16:9 V-Position 21:9 PIP/PBP Screen Fit Choose the size and aspect ratio of the picture displayed on screen. •• 16:9: Display the picture with an aspect ratio of 16:9. •• 21:9: Display the picture with an aspect ratio of 21:9. •• Screen Fit: Display the picture with the original aspect ratio without cutting off.
H-Position & V-Position Configuring H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. ――This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels. ――Not available when PIP/PBP Mode is set to On.
PIP/PBP The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed on the main screen at the same time the another source device is displayed in inset windows. The PBP (Picture by Picture) function separates the screen in half displaying output from two different source devices simultaneously on the left and right sides of the screen. ――Compatible with Windows7 and Windows8.
Configuring PIP/PBP Mode Enable or disable the PIP/PBP Mode function. Screen Image Size Screen Fit H-Position 3 V-Position 3 Configure the settings for using Picture in Picture/ Picture by Picture. PIP/PBP 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
Configuring Size Select the size and aspect ratio of the sub-screen. PIP/PBP Select the size and aspect ratio of the sub-screen. PIP/PBP Mode Size Position Sound Source 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button. 4 Move to the Size controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP.
Configuring Position Select the position of the sub-screen from the available options. PIP/PBP PIP/PBP Mode Size Position Sound Source On Select the position of the sub-screen from the available options. 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button. 4 Move to the Position controlling the JOG button UP/DOWN and press the JOG button.
Configuring Sound Source Set which screen you want to hear the sound for. PIP mode PIP/PBP PIP/PBP Mode On Size Set which screen you want to hear the sound for. 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button. 4 Move to the Sound Source controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP.
Configuring Source Select the source for each screen. PIP Mode (available in PIP mode(Size / / )) PIP/PBP PIP/PBP Mode On Select the source for each screen. 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button. 4 Move the JOG button UP/DOWN to select Source and then press the JOG button. by moving the JOG button UP.
PBP Mode Select input sources for the devices displayed on the main and sub screens. (available in PBP mode(Size )) PIP/PBP PIP/PBP Mode On Select the source for each screen. Size Position Sound Source 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button. 4 Move the JOG button UP/DOWN to select Source and then press the JOG button.
Configuring Image Size Select the image size for sub-screen. PIP Mode (available in PIP mode(Size / / )) In PC mode PIP/PBP PIP/PBP Mode On Select the image size for each screen. Size Contrast 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button. 4 Move the JOG button UP/DOWN to select Image Size and then press the JOG button.
PBP Mode Set the Image Size for each of the divided screens. (available in PBP mode(Size )) In PC mode PIP/PBP PIP/PBP Mode On Select the source for each screen. 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button. 4 Move the JOG button UP/DOWN to select Image Size and then press the JOG button. by moving the JOG button UP.
In AV mode In AV mode •• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. Image Size •• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9. •• 21:9: Display the picture of the sub-screen with an aspect ratio of 21:9. •• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off. ――The function may not be supported depending on the ports provided with the product.
Configuring Contrast Adjust the contrast level for sub-screen. PIP Mode (available in PIP mode(Size / / )) PIP/PBP PIP/PBP Mode On Size Position Sound Source Source Image Size Adjust the contrast level for each screen. 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
PBP Mode (available in PBP mode(Size Adjust the contrast level for each screen. )) PIP/PBP PIP/PBP Mode On Size Adjust the contrast level for each screen. Position Sound Source Source Image Size Contrast PBP Contrast 75/75 1 When the Function Key Guide appears, select 2 Move to Screen controlling the JOG button UP/DOWN and press the JOG button. 3 Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
Chapter 06 Coordinating OSD A detailed description of each function is provided. Refer to your product for details. Language Configuring Language Set the menu language. ――A change to the language setting will only be applied to the onscreen menu display. ――It will not be applied to other functions on your PC. Options Language Deutsch Display Time English Transparency Español Set the menu language.
Display Time Configuring Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. Options Language Display Time 5 sec Transparency 10 sec Set how long the menu window will remain on screen for when it is not in use.
Transparency Changing Transparency Set the transparency for the menu windows. Options English Language Display Time Transparency Configure the transparency of the menu windows. 1 When the Function Key Guide appears, select 2 Move to Options controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Transparency controlling the JOG button UP/DOWN and press the JOG button. to display the corresponding menu screen.
Chapter 07 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Sound Configuring Volume Settings Sound Eco Saving Off USB Super Charging PC/AV Mode DisplayPort Ver. 1.2 Source Detection Auto Key Repeat Time Acceleration 1 When the Function Key Guide appears, select 2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Sound controlling the JOG button UP/DOWN and press the JOG button.
Configuring Sound Mode 1 When the Function Key Guide appears, select 2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Sound controlling the JOG button UP/DOWN and press the JOG button. 4 Move to Sound Mode controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP. Next, press the JOG button. Sound Volume Sound Mode Standard 75% Select Sound Music 50% Movie •• Standard: Selects the normal sound mode.
Configuring Select Sound Sound Volume 50 Sound Mode Select Sound Stereo 1 When the Function Key Guide appears, select 2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Sound controlling the JOG button UP/DOWN and press the JOG button. 4 Move to Select Sound controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP. Next, press the JOG button. Left Channel •• Stereo: Enable the sound both from the left and right speakers.
Eco Saving Configuring Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG ――This option is not available when MAGIC Bright is in Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. Settings Adjust the power consumption of the product to save energy. Sound Eco Saving Off USB Super Charging Minimum PC/AV Mode Maximum DisplayPort Ver.
――Setting USB Super Charging to On during a data transfer will stop the data transfer. If you set USB Super Charging to Off, USB Super Charging the standard charging and data transfer feature will be available. ――High-speed charging is possible using the and ports only. These ports charge devices faster than typical USB ports. The speed depends on the connected devices. Charge the battery of a connected source device quickly using the USB 3.0 port on the product.
――Supplied for the wide models only such as 16:9 or 16:10. PC/AV Mode ――If the monitor is in HDMI 1, HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates, press the JOG button to display the function-button screen and then select the icon. You can select PC or AV. Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. Configuring PC/AV Mode Settings Set to AV to enlarge the picture.
――Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications. DisplayPort Ver. ――If the monitor is in HDMI 1, HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode activates, press the JOG button to display the function-button screen and then select the Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
Source Detection Configuring Source Detection You can activate Source Detection. Settings Decide how input sources will be detected. Sound Eco Saving Off USB Super Charging 1 When the Function Key Guide appears, select 2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Source Detection controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP. Next, press the JOG button. •• Auto: The input source is automatically recognized.
Key Repeat Time Configuring Key Repeat Time Control the response rate of a button when the button is pressed. Settings Sound Off Eco Saving USB Super Charging PC/AV Mode DisplayPort Ver. Source Detection Key Repeat Time Acceleration 1 sec 2 sec No Repeat Configure the response rate of a button when the button is pressed. 1 When the Function Key Guide appears, select 2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button.
Off Timer Configuring Off Timer You can set the product to automatically turn off. Settings Enable or disable the Off Timer. Off Timer Power LED On Stand-by 1 When the Function Key Guide appears, select 2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Off Timer controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP. Next, press the JOG button.
Off Timer Off Timer Off Turn Off After 4h -- The displayed image may differ depending on the model. Set the monitor to automatically turn off after a certain time period. Configuring Turn Off After ――This option is only available when Off Timer is set to On. 1 When the Function Key Guide appears, select 2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Off Timer controlling the JOG button UP/DOWN and press the JOG button.
Power LED On Configuring Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product. Settings Off Timer Working Image Size Power LED On Stand-by Reset All Set the status of the power LED. 1 When the Function Key Guide appears, select 2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Power LED On controlling the JOG button UP/DOWN and press the JOG button. by moving the JOG button UP.
Reset All Initializing Settings (Reset All) Return all the settings for the product to the default factory settings. Settings Off Timer Stand-by Power LED On Reset All Return all the settings for the product to the default factory settings. 1 When the Function Key Guide appears, select 2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button. 3 Move to Reset All controlling the JOG button UP/DOWN and press the JOG button.
Chapter 08 Information Menu and Others A detailed description of each function is provided. Refer to your product for details. Information Picture View the current input source, frequency and resolution. When the Function Key Guide appears, select Options HDMI 1 ****x**** **kHz **Hz Settings by moving the JOG button UP. Next, press the JOG button.
Configuring Brightness, Contrast and Sharpness from the Initial Screen Brightness SAMSUNG ――This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. ――This menu is not available when Eco Saving is enabled. Contrast SAMSUNG ――This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. You can adjust Brightness, Contrast or Sharpness by moving the JOG button up or down, if no OSD menu is displayed.
Configuring Volume in the Initial Screen Volume 1 Adjust the Volume controlling the JOG button LEFT/RIGHT. ――If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the sound or You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed. Volume 50 cause choppy audio when applying the headphones or speakers.
Chapter 09 Installing the Software Easy Setting Box Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. Installing the Software 1 Insert the installation CD into the CD-ROM drive. 2 Select the Easy Setting Box setup program. ――If the pop-up screen for the software installation does not appear on the main screen, find and double-click the Easy Setting Box setup file on the CD-ROM. 3 When the Installation Wizard appears, click Next.
Chapter 10 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. If the screen remains blank, check the PC system, video controller and cable. Testing the Product Check if your product is operating normally by using the product test function.
Check the following. Installation issue (PC mode) Issues Solutions The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the screen have nothing to do with the product. Blank spaces on the screen are caused by the PC or graphics card.
Issues The screen is not clear. The screen is blurry. Solutions Remove any accessories (video extension cable, etc.) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product. Next, if required, change the settings, referring to Standard Signal Mode Table (P.
Sound issue Issues Solutions There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Video is available but there is no sound. Sound cannot be heard if a HDMI-DVI cable is used to connect the input device. Connect the device using an HDMI cable or a DP cable.
Q&A Refer to the user manual for your PC or graphics card for further instructions on adjustment. Question How can I change the frequency? Answer Set the frequency on your graphics card. •• Windows XP: Go to Control Panel Appearance and Themes Display Advanced Monitor, and adjust Refresh rate under Monitor settings. •• Windows ME/2000: Go to Control Panel Display adjust Refresh rate under Monitor settings.
Question How do I set power-saving mode? Answer •• Windows XP: Set power-saving mode in Control Panel Screen Saver Settings or BIOS SETUP on the PC. Appearance and Themes •• Windows ME/2000: Set power-saving mode in Control Panel Settings or BIOS SETUP on the PC. Display Display Screen Saver •• Windows Vista: Set power-saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC.
Chapter 11 Specifications - General Size Model Name Panel - S34E790C Size 34 Class (34 Inches / 86 cm) Display area 797.22 mm (H) x 333.72 mm (V) 31.4 Inches (H) x 13.1 Inches (V) Display area H Pixel Pitch 0.23175 mm (H) x 0.23175 mm (V) 0.009124 Inches (H) x 0.009124 Inches (V) V Dimensions (W x H x D) / Weight Without Stand 32.3 x 14.3 x 2.0 Inches / 16.3 lbs With Stand - 821.5 x 364.0 x 51.5 mm / 7.4 kg MIN: 821.5 x 452.0 x 275.5 mm / 9.9 kg 32.3 x 17.8 x 10.8 Inches / 21.
Model Name Environmental conditions S34E790C Operating Temperature: 50 F - 104 F (10 C - 40 C) Humidity: 10 % - 80 %, non-condensing Storage Temperature: -4 F - 140 F (-20 C - 60 C) Humidity: 5 % - 95 %, non-condensing ――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect product performance. ――This device is a Class B digital apparatus.
PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersaving mode only functions when the product is connected to a PC with a power-saving function.
Standard Signal Mode Table -- This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
-- Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. -- Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
Chapter 12 Appendix Contact SAMSUNG WORLD WIDE ――If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us/support CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca/support (English) http://www.samsung.com/ca_fr/support (French) LATIN AMERICA ARGENTINE 0800-333-3733 http://www.samsung.com/ar/support BOLIVIA 800-10-7260 http://www.samsung.
LATIN AMERICA COSTA RICA DOMINICA 0-800-507-7267 http://www.samsung.com/latin/support (Spanish) 00-800-1-SAMSUNG (726-7864) http://www.samsung.com/latin_en/support (English) 1-800-751-2676 http://www.samsung.com/latin/support (Spanish) http://www.samsung.com/latin_en/support (English) ECUADOR EL SALVADOR 1-800-10-72670 http://www.samsung.com/latin/support (Spanish) 1-800-SAMSUNG (72-6786) http://www.samsung.com/latin_en/support (English) 800-6225 http://www.samsung.
LATIN AMERICA PANAMA PARAGUAY 800-7267 http://www.samsung.com/latin/support (Spanish) 800-0101 http://www.samsung.com/latin_en/support (English) 009-800-542-0001 http://www.samsung.com/latin/support (Spanish) http://www.samsung.com/latin_en/support (English) PERU 0-800-777-08 http://www.samsung.com/pe/support PUERTO RICO 1-800-682-3180 http://www.samsung.com/latin/support (Spanish) http://www.samsung.com/latin_en/support (English) TRINIDAD & TOBAGO 1-800-SAMSUNG (726-7864) http://www.
Responsibility for the Pay Service (Cost to Customers) ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. •• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.
Terminology OSD (On Screen Display)____ On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. HUB____ HUB refers to a device that is a common connection point for multiple devices connected over a network. It is used to connect multiple PCs, video devices, office devices and/or LANs over a single network.
