Laptop User Manual

S3C2440A RISC MICROPROCESSOR CLOCK & POWER MANAGEMENT
7-17
Power Control of VDDi and VDDiarm
In SLEEP mode, VDDi, VDDiarm, VDDMPLL and VDDUPLL will be turned off, which is controlled by PWREN pin.
If PWREN signal is activated(H), VDDi and VDDiarm are supplied by an external voltage regulator. If PWREN pin
is inactive (L), the VDDi and VDDiarm are turned off.
NOTE
Although VDDi, VDDiarm, VDDMPLL and VDDUPLL may be turned off, the other power pins have to be supplied.
S3C2440X
Power CTRL
(Alive Block)
RTC Alarm
EINT
External Interrupt
3.3V Power
PWREN
VDDi
VDDiarm
VDDMPLL
VDDUPLL
Core & Peripherals
RTC
I/O
Regulator
1.2V/1.3V
EN
1.2V/1.3V
Power
VDDalive
ADC
1.8V~3.6V
Memory
Interface
1.8V/2.5V/3.3V
3.3V
Figure 7-12. SLEEP Mode
NOTE
During sleep mode, if you don’t use Touch Screen panel, Touch ports (XP, XM, YP, and YM) must be floating.
That is, Touch ports (XP, XM, YP, and YM) shouldn’t be connected to GND sources. Because XP,YP will be
maintained H during sleep mode.