User Guide

• The maximum enlargement rate inproportion to the image size.
Image size 8M 7MP 6MW 5M 3M 1M
Max,mumenargemenraeX 2.0 Xl .3 X9.5 X9.0 X8.0 X4.0
• Trimming : You can extract partof the imagethat you
want and save it separately.
1. Select an image that you want to enlarge and
press the enlargementbutton. Pressthe Menu
button and a messagewill be displayed.
2. Select a desired sub menu bypressing the
Left/Right button and press theOK button.
[Yes] : Thetrimmed image willsave as a new filename, and display on the
LCD monitor.
[No] : The trimmingmenu wiltdisappear.
÷ If there is little memory spaceto savethe trimmed image, the imagecan't be
trimmed.
÷ To deletethe enlarged imageduring the trimmingfunction, press the delete
button.
• When the menu isdisplayed on the LCD monitor,pressing the UP button makes
the menu cursor move up.
• When the menu isnot displayedon the LCD monitor, the UP button operates as
thevoice memo button. You can add your voice to a stored stillimage.
• Adding a VoiceMemo to a Still Image
1. Press the LEFT/RIGHT button to select an
image that you wish to add soundto.
2. Press thevoice memo button ( ,_ ) and the voice
memo indicatorwill display.The camera isnow
ready to record a voice memo.
3. Press the shutterbutton to start recording and
voice will be recorded to the still image for 10
seconds. While thevoice is recording,the
recording status window will be displayedas
shown alongside.
4. The recording can be stopped by pressing the
shutter button again.
5. The ( _ ) icon will be displayed on the LCD
monitor after voice memo recording has finished.
- Voice memos can't be recorded onto movie clip
and voice recording files.
- A distanceof 40cm between you and the
camera (microphone)is the bestdistance to
record sound.
- The voice memowill be saved in *.wav format, but has the same file name
as the still imageto which it corresponds.
- If you add anew voice memo to the stilt imagethat already has a voice
memo, the existingvoice memo will be erased.
_,44}