User Guide

The images are unclear
•A picture was taken the subject without setting an appropriatemacro mode
Select an appropriate macro mode to take a clear image.
•Taking a picture beyond theflash range
Take a picture withinthe flash range
•The lens issmudged or dirty
Clean the lens
The flash does not fire
•Flash off mode has been selected
Dis-engage flash off mode
•The camera mode can t use the flash
Refer to the FLASHinstruction(p.24)
Incorrect date and time is displayed
•The date andtime have been set incorrectlyorthe camera has adopted the
default settings
_Reset the date andtime correctly
The camera buttonsdo notoperate
•Camera malfunction
Remove/re-insert batteryand switch the camera on
A card error has occurredwhile the memory card isin thecamera.
•incorrect memory card format
Re-format the memory card
The images don't piay back
•incorrect file name(Violation of DCFformat)
Do not change the imagefile name
Colour of image isdifferent to the originalscene
•White balance or effect setting is incorrect
Select appropriateWhite balance and effect
Images are too bright
•Exposure isexcessive
Reset exposure compensation
No image on externaJmonitor
•The externaJmonitor has not been connected propedywith the camera
Check the connection cables
•There are incorrectfiles inthe memory card
tnsert a memory card that has correctfiles
When using the PO's explorer,the [Removable Disk]file does notshow
•Cable connection isincorrect
Check the connection
•The camera isoff
Turn the camera on
•The operating system isnot Windows 98, 98SE, 2000, ME, XP/Mac OS 10.0 -
10.3. Alternativelythe PC does notsupport USB
InstallWindows 98, 98SE, 2000, ME, XP/Mac OS 10.0 - 10.3to PC that
supports USB
•The camera driver is not installed
Installa [USB Storage Driver]
{71}