User Guide

• _fyou connectthe USBcable to aUSB port on your PCand then turnon the
power, the camera will automaticallysw4tchto "computerconnection mode".
• _nthismode, you can download stored imagesto your PCthrough the USB
cable.
• The LCD monitor is alwaysturned off in PC mode.
• Connectingthe camera to a PC
1. In any mode with theexception of Voice Recording
mode, press the Menu button.
2. Pressthe LEFT/RIGHT button and selectthe
[SETUP]menu tab.
3. Selectthe [USB] menu by pressing the UP/DOWN
buttonand press the RIGHT button.
4. Use the UPand DOWN buttonsto select
[Computer],and then pressthe OK button.
5. Pressthe menu button twice and the menu will
disappear.
6. Connectthe PCto the camera with the USBcabIe.
• Connectingthe camera to a PC
÷ Ifyou selected [Printer] in Step4, when you connect the camera to your
phnter, the [Connecting Printer] messagewilt display and the connection will
not be established.
In thiscase, disconnect the USB cable, and then fotbw the procedure from
Step 2 and onward.
• Disconnectingthe camera and PC : Refer topage 79
(Removing the removable disk).
(77}