Specifications

Video Security System
Camera Terms & Features
::::::::::::::::::::::::::::::::::::::::::::::::::::::
Features
Samsung Video Security System | 22 . 23
Camera Type Color/BW Color
Image Device 1/3" Super-HAD IT CCD
Effective Pixels 768 x 494 752 x 582
Horizontal Resolution 540 TV Lines
Min. Scene Illumination 0.4 Lux (F1.2, 50 IRE), 0.24 Lux (F1.2, 30 IRE), 0.12 Lux(F1.2, 15 IRE)
Functions Line Lock On/Off
White Balance ATW/AWC
ELC On/Off(ALC)
BLC On/Off
Video Output VBS 1.0Vp-p
S/N Ratio 50 dB
Lens Mount C/CS Compatible
Lens Drive Type ALC(DC only)/ELC
Operating Temperature -10˚C ~ + 50˚C
Operating Humidity Less than 90%
Power Requirement SCC-B1311 : AC24V & DC12V / SCC-B1011 : AC220V
Power Consumption SCC-B1311 : 3W / SCC-B1011 : 3.5W
Physical Dimensions SCC-B1311 : 68(W) x 55(H) x 77.6(D)mm
Specification SCC-B1011 : 68(W) x 55(H) x 136.3(D)mm
Weight SCC-B1311 : 216g / SCC-B1011 : 446g
Specifications
High Resolution Color Camera
SCC-B1311/B1011
• 1/3" SONY 410K/470K pixels Super-HAD IT CCD
• High resolution : 540 TV lines
• Min. scene illumination : 0.4 Lux (F1.2, 50IRE),
0.24 Lux (F1.2, 30IRE), 0.12 Lux (F1.2, 15IRE)
• Internal/line lock (phase control) function
• Auto level control (DC type only)
• Electronic level control (manual lens)
• Back light compensation (On/Off)
• Auto white balance (ATW/AWC)
• Flickerless function
• C/CS mount compatible
• SCC-B1311 : DC12V & AC24V 60Hz (50Hz)
SCC-B1011 : AC220V (50Hz)
• SCC-B1311 : 60.5(W) x 59.5(H) x 77(D) mm
SCC-B1011 : 60.5(W) x 59.5(H) x 125.2(D) mm
Features
Dimensions (unit:mm)
SCC-B1011P
SCC-B1311
Model SCC-B1311N SCC-B1011P/B1311P
68
65
55
72.6
77.6
63.5
7.6
SCC-B1311
SCC-B1311
DC
LENS
Pin no. DC Control Type VIDEO Control Type
1 Damp (-) Power (+12V)
2 Damp (+) N/A
3 Drive (-) VIDEO Signal
4 Drive (+) GROUND
Lens Selection
When using an auto iris lens, The lens selection switch next to the camera should be set according to the type of auto iris lens.
Select ‘DC’ if the installed lens is a DC-control type, and select ‘VIDEO’ if it is a video-control type. Adjust the illumination level
with the DC-IRIS VR at the back of the camera when DC-type is selected, or adjust the Illumination level by using the level VR
on the lens when video-type is selected.
* When using an AI lens, turn off the ELC switch at the back of the camera.
When using a manual iris lens, Open the lens iris completely and turn on the ELC function at the back of the camera.
Camera Back Focus Adjustment
The back focus of the camera is set when the product is shipped from the factory. However, the back focus can be adjusted in the following manner
if the focus is not properly set.
For Standard Lens (non-Zoom)
1. The lens should be able to clearly recognize high-definition images such as an object with
cross stripes from a distance of 10 meters when the focus ring of the lens is set to infinity(∞).
2. Adjust the focus by turning the control ring of the flange back until the object can be seen
clearly under the circumstances described above.
3. Fasten the screw of flange back control ring.
For Zoom Lens
1. Place a high-definition image 3-5m apart from the camera and then turn the focus of the lens
as far as possible in the TELE (zoom in) direction so that the image can be seen vividly as possible.
2. Turn the lens zoom as far as possible in the WIDE direction, turning the flange back control ring
of the camera so that the object can be seen most vividly.
3. Adjust so that the focus from the TELE side can be vividly matched with the focus from the
WIDE side by repeating above steps 1 and 2 2~3 times.
4. Fasten the screw of the flange back control ring. The control can be set more accurately if
the focus can be adjusted by attaching dark color paper or ND filter to the front lens.
Rb
Pin3
Pin1
Pin2
Pin4
Flange Back Focusing Distance
C Mount 17.526mm
CS Mount 12.5mm