Specifications

Samsung Video Security System | 34 . 35
SCC-C4207 SCC-C4307
The functions of these parts will differ, depending on the operation mode
of the camera.
Up/Down Direction Switch : Zoom Tele or Zoom Wide switch, respectively.
Left/Right Direction Switch : Near Focus or Far Focus switch, respectively.
[SET UP] Switch: This is used to enter the setup menu :
The user can enter the setup menu by pushing the [SET UP] switch, and
holding it for 3 seconds.
• When the camera is in general operation mode :
Camera Manipulation Switch (setup switch)
This is the terminal used to connect an external controller for ZOOM/FOCUS and menu
control and for executing the HOME RETURN and AF functions. It can be set to one of
four modes (A, B, C or D) according to the input condition.
ZOOM/FOCUS REMOTE Terminal
Up/Down Direction Switch : Used to move the cursor up or down.
Left/Right Direction Switch : Used to move the cursor to the left or right.
Other functions may be designated by the setup menu.
[ENTER] Switch : Used to select the highlighted option.
• From the setup menu :
Day & Night IN
GND
Alarm Output
1
2
This is the terminal that allows connection to an external brightness sensor (optional) to
trigger switching between black & white or color mode. It also sends out an alarm signal
when linked to the MOTION DET function or black & white.
Day & Night External Signal Input and Alarm Signal Output
Terminal
This is the terminal that is connected to the video input terminal of a monitor. The video
images from the camera are sent to the monitor through this terminal.
Video Output Terminal
This is the RS485 remote control port.
RS485 Port
The LED will be on if power is being supplied to the camera.
Power LED
This is the terminal that is connected to the power adaptor cable.
Power Input Terminal
Rear Parts Exterior
::::::::::::::::::::::::::::::::::::::::::::::::
Features
• 1/4" 410K/470K Pixels Ex-View CCD
• DIS (Digital Image Stabilizer)
• 32x zoom Lens (digital zoom:10x)
• Min. scene illumination : 0.002(color)/0.0002(B/W) Lux
• Day/Night
• 128x WDR (Wide Dynamic Range)
• Motion detection (with adjustable zones and sensitivity levels)
• Privacy protection that allows up to 8 privacy zones
• Remote control through RS485 (using SSC-1000/5000)
• Excellent signal-to-noise ratio (50dB)
32x Zoom DayNight WDR Camera
SCC-C4207/C4307
Specifications
Image Device 1/4" Ex-View CCD
Effective Pixels NTSC : 768(H) x 494(V) / PAL : 752(H) x 582(V)
Scanning Method 2 : 1 Interlace
Scanning Line Horizontal NTSC : 15.750Hz / PAL : 15.625Hz
Frequency Vertical NTSC : 60Hz / PAL : 50Hz
Synchronization Method Internal Internal/Line lock
Horizontal Resolution 480 TV Lines
Min. Scene Color 0.002 (Sens-up 160x,15IRE)Lux
Illumination B/W 0.0002 (Sens-up 160x,15IRE)Lux
Lens Zoom Ratio 320x (32x Optical, 10x Digital)
Focal Length 3.55 ~ 113mm
Aperture Tele F4.17
Ratio Wide F1.69
Viewing Tele 1.78˚(H) x 1.34˚(V)
Angle Wide 56.41˚(H) x 43.01˚(V)
Functions Wide Dynamic Range Off/On (128x)
Day/Night Color/BW/Auto/EXT (ICR)
Motion Detection Off/On (Area/Sensitivity Setting)
Electronic Shutter Off, 1/100 ~10,000 sec
Sens Up Off/Auto (2x ~ 160x)
BLC Off/On (Area Setting)
AGC Off/Low/High
Camera ID Max. 20 Characters
White Balance ATW/ATW2/AWC/Manual
IR Filter Off/On
Privacy Zones 8 (Mosaic)
Signal Output VBS 1.0Vp-p(75 Ohm, Composite)
S/N Ratio 50dB(AGC Off)
Input/Output Image Output BNC
Remote Control RS485
Alarm Output 1
Power Terminal Block (2-pin)
Operating Temperature -10˚C ~ +50˚C
Operating Humidity Maximum 90% RH
Power Requirment DC12V AC24V/DC12V compatible
Power Consumption 5.5W 6W
Dimensions
60.5(W) x 59.5(H) x 126.7(D)mm 60.5(W) x 59.5(H) x 160.9(D)mm
Weight 390g 515g
Model SCC-C4207 SCC-C4307
Dimensions (unit:mm)
SCC-C4307
SCC-C4207