Specifications

Samsung Video Security System | 130 . 131
• 3 mega pixel network camera
• MPEG-4 & motion JPEG dual encoding and streaming
simultaneously
• 1.3 / 2 / 3 mega pixel resolution (selectable)
• Video motion detection
• Pre/post alarm image buffering
• DDNS support
• Power over Ethernet (PoE) support
• Bi-directional audio support
• SD memory card slot for Alarm Recording
Features
::::::::::::::::::::::::::::::::::::::::::::::::::
Camera Scanning System
Image Device
Synchronizing System
Resolution
Environment Network Board OS
Client Viewer OS
Client S/W
Browser Web Browser
Compression Audio & Video Codec
Network Flash Memory
Hardware SDRAM
Network Ethernet
Network Protocol Network Protocol
Streaming
DDNS
Video Resolution NTSC/PAL MJPEG
MPEG4
Frame Rate NTSC/PAL MJPEG
MPEG4
Video Quality
Motion Detection Sensitivity
Audio ADPCM G.711
Connection Users
Alarm Input / Output
Alarm Event Alarm Input
Motion Detection
Schedule
IP Installer IP Address Installation
Software Upgrade Firmware Upgrade
Access Level Login Access Level
Time Setting
Language
SDK HTTP API CGI Command
Windows API
Hardware Input/Output sockets
Operating Temperature
Operating Humidity
Power Requirement
LED Indicator
Dimensions
Weight
Body Color
Progressive QXGA
1/2" 3 Mega Pixel CMOS
Internal
MJPEG : 2048x1536, 1600x1200, 1280x1024 / MPEG4 : 640x480
Embedded Linux
Windows XP, VISTA
1CH WebBrowser Viewer(Default), Net-i S/W
Internet Explorer 6.0 Higher
MPEG4, MJPEG, G.711
32M byte
128M byte
10/100BASE-T
TCP, UDP, NTP, HTTP, DHCP, FTP, SMTP, RTP/RTSP, VSIP
TCP, UDP(Unicast, Multicast)
Supporting Samsung DDNS and Public DDNS Servers
3 MegaPixel (2048 X 1536)
2 MegaPixel (1600 X 1200)
1.3 MegaPixel (1280 X 1024)
VGA (640x480) Only
3 MegaPixel : 12, 6, 3, 1 FPS
2 MegaPixel : 19, 10, 5, 1 FPS
1.3 MegaPixel : 25, 13, 6, 1 FPS
Same as MJPEG Framerate @ VGA
1 ~ 10 Level
High, Medium, Low
2-Way
Max 10 Users at Unicast Mode
2 / 2
Image Transfer : FTP, E-mail / Notification : Notify to Viewer
Alarm Out / Recording : SD/SDHC Card
Image Transfer : FTP, E-mail / Notification : Notify to Viewer
Alarm Out / Recording : SD/SDHC Card
Image Transfer : FTP, E-mail / Recording : SD/SDHC Card
IP Installation Function (XP, VISTA support)
Firmware Upgrade by Web Browser
Administrator, Operator, User
NTP Time Sync, PC Time Sync, Manual Setting
Multiple Language GUI Support
Provides Functionality to Control Cameras and Set/Retrieve Internal Parameter Values.
Windows API for Viewing Data Streams from Network Camera.
Power(2-Pin Term), RJ-45, SD Card Slot, Terminal 6Pin ( Alarm In 2Pin, Alarm Out 2Pin, GND)
14˚F~122˚F(-10˚C~50˚C)
Less than 90%
AC24V(60/50Hz)/DC12V/ PoE
3 EA
83(W) x 60.9(H) x 147.4(D)mm
0.42Kg
Silver
Model SNC-M300
Specifications
* SNC-M300 supports only VGA(640x480) Resolution at MPEG4 mode.
Dimensions (unit:mm)
With dual-encoding capability, SNC-M300 can generate and transfer both MJPEG and MPEG4 images simul-
taneously. This dual encoding and streaming capability is useful for transferring MPEG4 images over limited
network bandwidth, while also storing high resolution MJPEG Images to the Nertwork Recording Software or
NVR device.
Dual Encoding / Streaming
SD Memory Slot
High Bandwidth Network
MJPEG
MPEG4
Recording
Web
Low Bandwidth Network
User can select important images to be recorded to the SD memory card such as : Alarm Events, Motion
Detection or Time Scheduled Events. Using the WebViewer or Net-i software, you can remotely access the
images from the SD card installed in the SNC-M300.
* SNC-M300 is compatible with SD and SDHC standard.
* SNC-M300 can support up to 16GB capacity of SDHC memory.
147.4
60.9
83
3 Mega-Pixel Network Camera
SNC-M300
CODEC1
MJPEG
CODEC2
MPEG4