User Manual

Using S Beam to Share Photos
This feature (when activated via NFC) allows you to beam
large files directly to another compatible device that is in
direct contact. These files can be larger, such as Videos, HD
photos, and other large files.You can beam images and
videos from your gallery, music files from your Music, and
more.
1. From a Home screen, touch
Apps  Settings
Connections
.
Connections
2. If not already active, touch the
OFF/ON button to the
right of
NFC to turn the feature ON
3. If not already active, touch the
OFF/ON button to the
right of
S Beam to turn the feature ON
4. On the source device that contains the desired image
or video, touch
Apps  Gallery .
5. Locate and touch the selected image to open it in the
preview window.
Important! Neither device must be in Lock mode or displaying
the Lock screen. They must both be active and
unlocked. It is recommended that the target device
be on the Home screen.
6. Place the two active NFC-enabled devices back to back
to begin.
Note: If the Touch to beam screen does not appear on the
source device:
- Pull them apart
- Verify the image is visible in the preview window on
the source device (providing the file)
- Place them together again
7. From the
Touch to beam screen, touch the reduced
image preview to begin the transfer.
8. When prompted, separate the two devices. After a few
seconds (depending on file size) the recipient with then
see the transferred file displayed on their screen.
Photos and Videos 106