SAMSUNG ER-290 ELECTRONIC CASH REGISTER 1
INTRODUCTION ...................................................................................................................................... 5 2. BASIC FEATURES AND FUNCTIONS............................................................................................. 5 3. PROGRAMMING.............................................................................................................................. 5 4. OPERATIONS...............................................................................
-8. PLU (Price Look Up).................................................................................................................... 27 3-8-1. OPEN PLU ............................................................................................................................... 27 3-8-2. PRESET PRICE PLU ............................................................................................................... 28 3-9. DATE ........................................................................
-9-1. OPEN DRAWER ...................................................................................................................... 48 4-9-2. NON ADD NUMBER ................................................................................................................ 49 4-10. RECEIVED ON ACCOUNT ....................................................................................................... 49 4-11. PAID OUT .....................................................................................
INTRODUCTION This Electronic Cash Register is designed for general retail applications requiring efficient management control and simplicity of operation. How to use this manual : This manual is divided into eight sections - 1. INITIAL SET-UP INSTRUCTION - which guides the user through the initializing of this model, changing the paper and ink ribbon. 2.
INITIAL SET-UP INSTRUCTION The following instructions describe how to unpack and start up the cash register. 1-1. UNPACK THE CASH REGISTER 1-1-1. Unpack and unwrap cash register. 1-1-2. Locate in the packing the following items. · 1 roll of paper · 1 ink ribbon · 1 rewind spindle · 1 set of control keys 1-1-3. Remove cardboard protectors from the cash drawer. 1-2. CLEAR RANDOM ACCESS MEMORY(RAM) & INITIALIZE REGISTER 1-2-1. Unplug the register. 1-2-2. Turn the control lock to MC position with control key.
INITIAL SET-UP INSTRUCTION 1-3. INSTALL PAPER IN THE PRINTER 1-3-1. Remove the printer cover and cut or tear the end of the paper roll evenly for the straight, even edge, for proper feeding through the printhead. 1-3-2. Place paper roll in the paper holder so that paper will feed from the bottom of the roll. 1-3-3. Insert the end of the paper into the paper slot of printer. 1-3-4. Depress the FEED key until the paper comes out about 20 ㎝ from the printer.
INITIAL SET-UP INSTRUCTION 1-3-5. For journal use: Insert the leading end of the paper into the paper take-up spool, wind the paper two or three turns around the spool shaft and install the spool in the mount. 1-3-6. For ticket use: Pass the outside plain tape through the window of the printer cover and replace the printer cover. CAUTION : When the printer cover is opened to change the paper, press the key carefully to avoid to be injured by the printer gear.
INITIAL SET-UP INSTRUCTION 1-4. CHANGING RIBBON 1-4-1. Remove the printer cover. 1-4-2. Lift up ink ribbon. 1-4-3. Insert the new ink ribbon. 1-4-4. Replace the printer cover.
BASIC FEATURES AND FUNCTIONS 2-1. KEYBOARD LAYOUT FEED CLERK X/TM 7 8 9 4 8 12 PLU RA +% -% 4 5 6 3 7 11 CHARGE PO CANCEL RF VD 1 2 3 2 6 10 #/NS TAX C 0 00 . 1 5 9 - FUNCTION KEY NUMERIC KEY SUB TOTAL CHECK CASH/ TEND DEPARTMENT, PLU, FUNCTION AND TENDER KEY 2-2. FUNCTION KEY DESCRIPTIONS FEED - Used to advance printer paper. 00,0-9 - For all numeric entries in REG, X, Z, VOID, and PGM mode.
BASIC FEATURES AND FUNCTIONS VD - VOID key is used for item void operation in REG and VOID mode. RF - RETURN MERCHANDISE key is used for refund operation in REG mode. Used to set up the decimal and tax information in PGM mode. - - MINUS key is used to register a negative amount in REG and VOID mode. Used to set up the TAX calculation status in PGM mode. -% , +% - PERCENT key is used to subtract or surcharge a percentage from an item, or the subtotal in REG and VOID mode.
BASIC FEATURES AND FUNCTIONS CHECK - Used to finalize the transaction in cheque sales in REG and VOID mode. Used to convert check into cash in REG mode. CASH/TEND - Used to finalize cash sales in REG and VOID mode. Used to calculate the change in REG and VOID mode. Used to read the Daily financial report in X mode. Used to read and reset Daily financial report in Z mode. Used to read the programming report in PGM mode.
BASIC FEATURES AND FUNCTIONS 2-3. CONTROL LOCK The Keylock has 7 positions. OFF VOID REG X Z PGM Key locks are : 2-3-1. 'VOID' - Used for void operations outside of a sale. 2-3-2. 'OFF' - The system is inoperable. 2-3-3. 'REG' - Used for normal operations. 2-3-4. 'X' - Used to read the reports. 2-3-5. 'Z' 2-3-6. 'PGM' - Used to read the reports and reset totals to zero. - Used for all register programming and to read the programming report. 2-3-7.
BASIC FEATURES AND FUNCTIONS 2-5. DISPLAY DPT RPT A M O U N T 1 2 3 4 CLERK DPT RPT AMOU NT CLERK : Indicates the Department number of the last item entered. : Indicates the number of times an item has been repeated or multiplied. : Indicates the number of times an item has been repeated or multiplied : Shows the current Clerk. 2-6. SYMBOL INDICATORS * SYMBOL INDICATORS (1st digit) CHANGE ERROR NEGATIVE TOTAL 2-7.
turn the power on again. 2-8. BATTERY SYSTEM This model is equipped with a battery system that provides back up power to the register memory if the power cord is accidentally disconnected or if a power interruption occurs. The register program, the transaction totals, and the grand total will be retained in the machine because of the memory protection feature. The average span of life is approximately 60 days after a power interruption. These batteries recharge automatically when the machine is plugged in.
PROGRAMMING Setting up features before use. When you finish with this program, make it a rule to depress the CASH/TEND key. *TURN CONTROL LOCK POSITION TO PGM MODE. 3-1. SYSTEM OPTION System option is provided for your selections of this model's functions according to the your requirements. It is provided for 22 varieties and its default status is mostly zero. You can set it up according to your preference with the RA key and the PO key. System option has its own number beteen 1 and 22.
PROGRAMMING STATUS TABLE No. 1 S Y S T E M O P T I O N Print GRAND TOTAL in X,Z report. STATUS YES = 0 NO = 1 2 Print GROSS TOTAL in X,Z report. YES = 0 NO = 1 Select printing DATE & TIME on all report. 3 4 - Print DATE & TIME all. 0 - Print only DATE. 1 - Print only TIME. 2 - Not print DATE & TIME all. 3 Reset CONSECUTIVE NUMBER after Z report. NO = 0 YES = 1 5 Reset COUNTER after Z report.
PROGRAMMING No. 12 S Y S T E M O P T I O N Print data of VOID position in report STATUS YES = 0 NO = 1 Select information of TAX 13 14 15 - Print separately TAX Amount. 0 - Print TAX Amount Total. 1 - Not Print TAX Amount. 2 - Print separately TAX Amount. 3 - Print TAX Amount Total. 4 - Print Taxable Total. - Not Print TAX Amount. Raised / Discarded. 5 TAX and % calculation. Discarded. Decimal multiplication and Round up. Raised / Discarded. split pricing calculation. Discarded.
NO = 1 18 Allow Check Cashing. YES = 0 PROGRAMMING No. S Y S T E M O P T I O N STATUS Select Information of Clerk 19 - Not allow function of Clerk 0 - Allow function of Clerk as Stay down mode. 1 - Allow function of Clerk as Pop up mode. 2 Select the DATE sequence. 20 19 Day - Month - Year 0 Month - Day - Year 1 Year - Month - Day 2 Allow function of Receipt Buffer. NO = 1 YES = 0 20 Printing the SALE ITEM COUNTER in Receipt.
PROGRAMMING 3-2. DECIMAL POINT & TAX INFORMATION This programming is for setting up the decimal point and tax information. Decimal point information comes in four varieties - from 0 to 3 and tax information comes in two varieties - VAT, ADD ON TAX. If you want to set up this information, do it as below.
3-4. PERCENT(%) Percent(%) key is programmed either positive or negative, as an open or preset amount of percentage. This is set up and calculated between 0.001% and 99.999%. The status of Percent key has two options. One is that tax calculated before percent rate is applied, and the other is that tax calculated after percent rate is applied. n1 - RA ── Select Status └─── STATUS : 0 -> Tax calculated before percent rate is applied. 1 -> Tax calculated after percent rate is applied. ┌ -% n2 n3 .
You can use the Clerk function as standard. Or you can set up the System option to allow. You can input a secret code for each clerk. The secret code is made up of 3 figures, which are numbers between 100 and 999. Each clerk has his own number between 1 and 4. To operate 4 clerks. Refer to the System option No.19, please. Clerk of System option is divided three modes. One is not setting up the Clerk function, another is setting up clerk function Stay down mode, and the other is Pop up mode.
PROGRAMMING 3-6-2. CHANGING THE SECRET CLERK CODE You can change the existing secret code of a clerk. By inputting the old secret No. followed by the new secret No. of the clerk. CLERK - n1 n2 n3 n4 n5 n6 n7 n8 - CLERK └─────┘ │ Old secret No. │ └─────┘ │ New secret No. │ │ │ └ Same clerk No. ┘ Example. Change the secret code of clerk1 123 to 111. CLERK 1 2 3 1 1 1 1 1 CLERK * 1 . . . . . . . . . # S 3-6-3. CONFIRMING THE CLERK If you want to confirm, do the follows.
PROGRAMMING 3-7. DEPARTMENT This programming consists of two parts. One is OPEN DEPARTMENT, and the other is PRESET PRICE DEPARTMENT. Each department can be programmed as OPEN or PRESET PRICE. 3-7-1. OPEN DEPARTMENT This is consist of HDLO(High Digit Lock Out) and status. HDLO means entries above a limit are not allowed. How to alter status. Status is whether the department is single item or not and what its tax is.
3-7-2. PRESET PRICE DEPARTMENT Preset price department consists of preset price and status. Preset price can be programmed up to seven digits. Status is equal to open department's. The sequence of inputting is as follows. n1 n2 n3 n4 n5 n6 n7 n8 - DPT └─────────────────┘ └ Status(same as open department) Preset price Example. Department1 : Price is 10.00, Not single item, Taxable by TAX1 Department2 : Price is 20.00, Not single item, Taxable by TAX2 1 . . . . . 1 0 .
Department NOTE !! Refer to 3-7-1. OPEN DEPARTMENT about HDLO and status. 3-8-2. PRESET PRICE PLU n1 n2 n3 - PLU - n4 n5 n6 n7 n8 n9 n10 n11 - DPT └────────────┘ └ Status └────┘ PLU No.(1 - 300) Preset price (same as open department) Eaxmple. PLU12, Price is 2.50, Not single item, Taxable by TAX1, Linked department1 1 2 5 0 2 PLU ── PLU No. 1 DPT1 ── Preset price * 0 1 2 1 . . . . . . 2 . 5 0 T 1 Department NOTE !! Refer to 3-7-1. OPEN DEPARTMENT about status information.
PROGRAMMING 3-9. DATE This is related to date sequence. You have to program according to following date sequence. n1 n2 n3 n4 n5 n6 - SUBTOTAL NOTE !! Day is allowed 1 to 31, month is allowed 1 to 12, year is consist of a number of two figures. Refer to SYSTEM OPTION 20 DATE SEQUENCE . Example.
3-11. REGISTER NUMBER You can set up a register number which consists of 2 figures. n1 n2 - #/NS Example. Set up this register number as 30. 3 * . . . . . . . . 3 0 # 0 0 0 0 0 3 1 5 . 2 5 3 0 0 #/NX NOTE !! After depressing the CASH/TEND key, you can finish setting up function in PGM mode. 3-12. RECEIPT/JOURNAL The default state of this program is the RECEIPT status. This means that the receipt is issued with stamp. If you select the JOURNAL status, the stamp is not operational.
YOUR RECEIPT THANK YOU - STAMP 2 5 - 1 2 - 1 9 9 7 1 0 T 1 2 0 T 2 0 0 6 0 T 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - HDLO, SINGLE ITEM and VAT STATUS - DEPT. NO., UNIT PRICE, TAX SYMBOL 1 2 . . . . . 0 . 7 0 7 0 4 0 5 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 7 0 * * * * 0 0 0 0 0 0 0 0 - 1 . . . . . 1 0 . 2 . . . . . 2 0 . 3 . . . . . . 0 . 4 . . . . . . 0 . 5 . . . . . . 0 . 6 . . . . . . 0 . 7 . . . . . . 0 . 8 . . . . . . 0 . 9 . . . . . . 0 . 1 0 . . . . . 0 . 1 1 . . . . . 0 . . . . . . . . . . . . . .
* * * * * * . . . . . . . . . . . . @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 2 2 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 * 1 * 1 0 . 0 . 1 . 2 . . . . . . . . . . . . . . 1 . . . . . 0 . 0 . . . . . . . . . 0 . 0 . . . 0 . 0 .
4. OPERATIONS Now, you can operate this model. This part explains how to operate the cash register. The tender keys are CASH/TEND , CHECK , CHARGE key. When the Clerk of System option is set up, operate the Clerk function first before using other functions in REG mode . * TURN CONTROL LOCK POSITION TO REG MODE. NOTE !! Following examples are based on VAT system.
OPERATION 4-1-1. CLERK SIGN ON You have to program the System option about Clerk and set up the secret code of the Clerk before operating the Clerk function. The system option has three types. One is used without the Clerk function, another is the Stay down mode, and the other is the Pop up mode. You have to operate according to how the System option was programmed. Two ways of operation are be available - Stay down operation - Pop up operation Stay down operation requires a manual sign off.
4-1-2. CLERK SIGN OFF When you sign off current Clerk, depress the O key and the CLERK in order. Then the end of display is not showed the comma.
OPERATION 4-2. DEPARTMENT This operation is when you enter a sales item using the department key. Watch the display when you are operating this key. One digit of the display indicate department No. and items. 4-2-1. OPEN DEPARTMENT You will probably have programmed the department before using this model. Do you remember the word, "HDLO(High Digit Lock Out)"? HDLO is means that entries above a limit are not allowed. If you did not set up HDLO of department, it is set up default status - 7.
4-2-3. DEPARTMENT REPEAT ENTRY 2 5 - 1 2 - 1 9 9 7 This is applied to either open or preset price department. Depress again the department key used for the item just entered and repeat as many times as required. This also applies to PLU. 4 0 0 DPT2 DPT2 ── Overriding department 2 2 1 1 * * * 1 . . . . . . 1 5 . . . . . . . . . . . . . . . . . . . . . . . . 0 . . 1 1 2 . 0 4 4 0 0 8 1 0 . . . . . . 0 .
4-2-5. DEPARTMENT MULTIPLICATION WITH DECIMAL POINT 2 5 - 1 2 - 1 9 9 7 1 1 2 · 0 0 X/TM DPT5 ── Multiple Department with decimal point ── Sale Department item CASH/TEND ── Tender * @ 5 * * 1 . . . . 1 5 . . . . . . . . . . . . . . . . 0 1 . . . 0 . 1 1 1 0 2 . . . 0 . 2 6 0 0 2 2 1 3 0 X 0 0 0 C A 0 0 4-2-6. SPLIT PRICING 2 X/TM ── Sale item 3 X/TM ── Set item 1 0 2 5 - 1 2 - 1 9 9 7 0 DPT6 ── Price of set item CASH/TEND ── Tender 38 * * @ 6 * * 1 . . . . . 1 5 . . . . . . .
OPERATION 4-2-7. SINGLE ITEM DEPARTMENT For example if Department 4 is programmed as a single item, Department 4 will not operate as a single sale if another department has already been used. And this is applies to open or preset price departments. 4 0 0 0 2 5 - 1 2 - 1 9 9 7 DPT4 4 * * * 1 . . . 1 5 . . . . . . . . . . . . 0 . 2 7 4 4 . 0 0 0 2 0 . . . 0 0 0 9 1 3 0 T 1 0 C A 6 T 1 2 0 4-3. PLU (Price Look Up) This operation is similar to Department.
4-3-3. PLU OVERRIDING Press the RA key before entering the number of the PLU in case of overriding of the preset PLU. 2 5 - 1 2 - 1 9 9 7 RA ── PLU Overriding 7 1 2 PLU ── Preset PLU 5 0 PLU ── Price * 1 * * * 1 CASH/TEND ── Tender 0 . . . 1 5 1 . . . 2 . . . . . . . . . . . . 0 0 . 2 7 7 7 0 0 . . . 0 5 5 5 1 3 0 T 1 0 C A 6 T 1 5 0 OPERATION 4-3-4. PLU REPEAT ENTRY 2 5 - 1 2 - 1 9 9 7 1 2 PLU PLU ── PLU No. * 0 1 2 1 . . . . * 0 1 2 1 . . . . * . . . . * . . . . * 1 1 5 .
OPERATION 4-3-5. PLU MULTIPLICATION 5 2 X/TM 2 5 PLU 0 0 * @ * 1 * @ * 1 * * * 1 ─┐ │ Open PLU PLU ─┘ 3 X/TM ── Quantity 2 PLU ── Preset PLU 1 2 5 - 1 2 - 1 9 9 7 ── Quantity CASH/TEND ── Tender . . 0 . . . 0 . . . 1 5 . . 2 . . . 1 . . . . . 5 . . . 2 . . . . . . . . . 2 X . . . 5 . 0 0 . . 1 0 . 0 0 . . . . . . 3 X . . . 2 . 5 0 . . . 7 . . 1 7 . . . 0 0 0 0 . 2 8 . . . 0 5 5 5 1 3 0 T 1 0 C A 6 T 1 7 0 4-3-6.
OPERATION 4-4 . PERCENT These keys are used to add or subtract a percent rate to or from an individual sale entry item or the entire sale. Each of the keys can function with a rate manually entered or a preset rate. To activate the preset rate entry, rate setting is necessary. 4-4-1. PERCENT ON A DEPARTMENT OR PLU ITEM FOR THE PRESET RATE ┌ DPT ┐ ┌ -% ‥‥‥ │ │ │ └ PLU ┘ └ +% Example. Preset rate Percent discount is 10.000%.
OPERATION 4-4-2. PERCENT ON A DEPARTMENT OR PLU FOR THE MANUAL RATE You can operate this key without the preset rate. The manual rate is the number of 5 figures between 0 % and 99.999 %. ┌ -% ‥‥‥ n1 n2 ． n3 n4 n5 - │ └ +% └─────────┘ Manual rate Example. The price of Department 1 is 10.00 and Percent discount is 5.000%. 1 5 · 0 0 0 0 0 0 DPT1 -% ── Sale item ── Percent discount on manual rate CASH/TEND ── Tender 43 2 5 - 1 2 - 1 9 9 7 1 * * * * * 1 . . . . . 1 5 . . . . . . . . . . . . . . . .
OPERATION 4-4-3. PERCENT ON SALE TOTAL ┌ -% ‥‥‥ SUBTOTAL - │ In case of preset rate └ +% ┌ -% ‥‥‥ SUBTOTAL - n1 n2 . n3 n4 n5 - │ In case of the manual rate └ +% └─────────┘ Manual rate Example. In case of Preset rate percent discount is 10.000%. 3 0 0 0 2 5 - 1 2 - 1 9 9 7 DPT3 ── Sale item SUBTOTAL ── Output subtotal -% ── Percent discount on preset rate CASH/TEND ── Tender Example. In case of Manual rate percent discount is 5.000%. 1 0 0 0 DPT1 3 * * * * * 1 . . . . . 1 5 . . . . . .
OPERATION 4-5. RETURN MERCHANDISE This operation is used to return merchandise. See the follows. ┌ DPT RF │ -- In case of Preset price └ n1 n2 n3 PLU ┌ n1 n2 n3 n4 n5 n6 n7 - DPT -- In case of Manual price │ └───────────┘ RF │ Price │ └ RA - n1 n2 n3 - PLU - n4 ... n10 - PLU ── PLU overriding └───┘ PLU No. └───┘ Price Example. PLU 12 has Preset price, 2.50. RF ── Return 2 5 - 1 2 - 1 9 9 7 merchandise 1 2 PLU ── Preset PLU 12 * 1 * * * 1 CASH/TEND ── Tender 0 . . . 1 5 1 . . . 2 . . .
OPERATION 4-6. VOID 2 5 - 1 2 - 1 9 9 7 4-6-1. LAST ITEM VOID / ERROR ITEM This key corrects the last item or voids the last item only. 1 0 0 0 DPT1 ── Sale item 2 0 0 0 DPT4 VD ── Void or Correct 1 . . 4 . . - 4 . . * . . * . . * 1 1 5 . . . . . . . . . . . . . . . 0 1 2 2 1 . 0 0 0 0 0 0 0 . . . . .
CASH/TEND ── Tender OPERATION 4-7. MINUS 1 0 0 0 DPT1 ── Sale item 2 0 0 0 DPT2 1 0 0 - 25-12-1997 1.......10.00T1 2.......20.00T2 *.......-1.00*.......29.00CA *........0.74T1 *1 000029 15.29 30 ── Discount CASH/TEND ── Tender 4-8. CANCEL When you have completed the transaction on the subtotal press CANCEL key . 1 0 0 DPT1 2 0 0 DPT2 3 0 0 DPT3 ── Sale item 2 5 - 1 2 - 1 9 9 7 1 2 3 * . . . . * 1 1 5 SUBTOTAL ── Subtotal CANCEL ── Cancel . . . . - . . . . - . . . . - .
OPERATION 4-9-2. NON ADD NUMBER This is used to print the reference number. n1 n2 n3 n4 n5 n6 n7 - #/NS └────────────┘ Reference number Example. The reference number is 1234567. 2 5 - 1 2 - 1 9 9 7 1 2 3 4 5 6 7 - #/NS * . . . 1 2 3 4 5 6 7 # 4-10. RECEIVED ON ACCOUNT n1 n2 n3 n4 n5 n6 n7 - RA └────────────┘ money received on Example. Received on 30.00. 3 0 0 0 2 5 - 1 2 - 1 9 9 7 RA * . . . . . 3 0 . 0 0 R A * 1 0 0 0 0 3 2 1 5 . 3 1 3 0 4-11. PAID OUT 4-11-1.
Example. Paid out 20.00. 2 5 - 1 2 - 1 9 9 7 2 0 0 0 PO * . . . . . 2 0 . 0 0 P O * 1 0 0 0 0 3 3 1 5 .
OPERATION 4-11-2. RECEIPT BUFFER Receipt issued when required. Set up System option 21. NOTE !! Refer to 3-1. SYSTEM OPTION about receipt buffer. Before operating the register, depress the PO key. This will suppress printing. If receipt required press the CASH/TEND key. Depress the PO PO key again, printing will resume. ── Suppress printing 1 0 0 0 DPT1 2 0 0 0 DPT2 ── Sale item 2 5 - 1 2 - 1 9 9 7 CASH/TEND ── Tender ( The receipt is not issued.) CASH/TEND ── Post finalization receipt.
OPERATION 4-12. SUBTOTAL 2 0 0 2 5 - 1 2 - 1 9 9 7 0 DPT1 ── Sale item SUBTOTAL ── Subtotal CASH/TEND ── Tender 1 * * * * 1 . . . . 1 5 . . . . . . . . . . . . . . . . 0 2 2 2 . 0 0 0 0 1 0 . . . . 0 0 0 0 4 3 3 . 3 1 0 0 0 8 5 0 T S C T 1 T A 1 4-13. TENDER These keys are finalization CASH/TEND , CHECK , CHARGE key. They can also be used for split tendering and change calculation. 4-13-1.
Tender on Check 4-13-3. CHARGE TENDER 2 0 0 0 DPT3 DPT3 ── Sale item 2 5 - 1 2 - 1 9 9 7 ── Repeat entry SUBTOTAL ── Output subtotal CHARGE ── Non-amount Charge tender 3 3 * * * 1 . . . . 1 5 . . . . . . . . . . . . . . . . 0 2 2 4 4 0 0 0 0 0 0 . . . . 0 . 3 2 0 0 0 0 3 3 0 0 0 S T 0 C 3 8 0 OPERATION 4-13-4. CHECK CASHING Check cashing means changing cash against a check. If this function was set up in System option, you can use this function.
CHARGE ── Non-amount Tender on Charge 4-13-6. POST TENDER Allows change calculation option is after finalization. NOTE !! Refer to 3-1. SYSTEM OPTION about Post tender. 6 0 0 DPT1 ── Sale item SUBTOTAL ── Output subtotal CASH/TEND ── Amount tender on cash 1 1 0 0 CASH/TEND ── Post tender 2 5 - 1 2 - 1 9 9 7 1 * * * * 1 . . . . 1 5 . . . . . . . . . . . . . 3 3 . . . . 0 . . . . 0 6 6 6 0 0 . . . . 0 0 0 0 4 4 3 0 0 0 4 1 0 T S C T VOIDS 5.
REPORTS System reports are divided into two basic categories; "X", or read-only and "Z", or read & reset to zero. Most reports are available in both categories. NOTE 11 Refer to REPORT TABLE about report. 6-1. CASH-IN-DRAWER DECLARATION In System Option Programming (3-1), Cash-In-Drawer Declaration can be programmed as compulsory.
REPORTS 6-2. CASH-IN-DRAWER REPORT After depressing the SUBTOTAL key in X mode, Cash-in-drawer Read Report will be issued. You can check cash on hand by this means. 2 5 - 1 2 - 1 9 9 7 * . . . . 4 2 8 . 4 4 R 1 * 1 0 0 0 0 4 3 1 5 . 3 3 3 0 --- Cash-in-drawer 6-3. CHECK-IN-DRAWER REPORT After depressing the CHECK key in X mode, Check-in-drawer Read Report will be issued. You can make check like Cash-in-drawer Read Report. 2 5 - 1 2 - 1 9 9 7 * . . . . . 3 0 . 0 0 R 2 * 1 0 0 0 0 4 4 1 5 .
Financial report is divided into two. One is Daily financial report and the other is Period financial report. You can issue Daily financial report with the CASH/TEND key and Period financial report with the CHARGE key. 6-4-1. FINANCIAL DAILY REPORT - X MODE This Report is read daily financial report. So does not reset totals, nor does it advance the Z counter. 6-4-2. FINANCIAL DAILY REPORT - Z MODE This report is read and reset daily financial report. So resets totals to 0, and will advance the Z counter.
Finalcial Daily Financial Period T I M E P L U Read X Read & Reset Z Read X Read & Reset Z Read X Read & Reset Z CASH/TEND CHARGE X/TM Read X Read & Reset Z From-To Read X The Start number of PLU,PLU The Last number of PLU,PLU Read X CLERK Read & Reset Z CASH - IN – DRAWER Read X SUBTOTAL CHECK - IN – DRAWER Read X CHECK C L E R K 58 PLU
REPORTS FINANCIAL REPORT 2 5 - 1 2 - 1 9 9 7 @ . --. PAID . . .OUT . .COUNTER . . 1 Z 1 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 1 * 1 * 1 * . . . . . . . . . . . . . . . . . . 0 . 1 . 2 . * * * * * * * * . . . . . . . . -- TIMELY TOTAL . . . . . . . 2 . . . 1 9 1 . 0 . . . . . . . 1 . . . 1 8 0 . 0 . . . . . . . . . . . . 7 3 . 0 . . . . . . . . . . . . 6 0 . 0 . . . . . . . . . . . . . 1 . 2 . . . . . . . . . . . . . 0 . 6 . . . . . . . . . . . . . 0 . 0 . . . . . . . . . . . . . 0 . 0 . . . . . . . . . .
REPORTS @ * @ * @ * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - . 5 . 0 . 1 . . . . . . . 0 . 0 . 0 2 0 - % 0 0 + % 1 0 - ------- SALE -% COUNTER SALE -% TOTAL SALE +% COUNTER SALE +% TOTAL - COUNTER - TOTAL * . . . . 4 9 8 . 4 4 # 1 -- NET TOTAL @ * @ * @ * @ * --------- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . 7 . 5 . 0 . 6 . . . . . . . . . 5 . 0 . 0 .
REPORTS 6-5. TIME REPORT If you depress the X/TM key in X mode, and then it will issue Time Read Report. If you depress the X/TM key in Z mode, it will issue Time Read and Reset Report. 2 5 - 1 2 - 1 9 9 7 @ . . . . . . . . . 1 Z 1 -- RESET(Z) COUNTER, MODE 1 5 . 0 0 @ . . . . . . . . 3 1 * . . . . 4 9 8 . 4 4 -- TIME -- COUNTER -- TIMELY TOTAL @ * * 1 . . 1 5 - - - . . . . . . . 4 0 . 3 5 . 9 0 . 8 0 . . 0 3 4 4 3 1 4 T L 6 0 -- COUNTER TOTAL -- SALES TOTAL 6-6.
REPORTS 6-6-1. FROM-TO PLU REPORT Enter the start number of PLU to be read, depress the PLU key, then the last number of PLU to be read, depress the PLU key in X mode. Example. Issue From 10 To 20 PLU REPORT. 1 0 PLU ─── Enter the start number of PLU 2 0 PLU ─── Enter the last number of PLU 2 5 - 1 2 - 1 9 9 7 @ . . . . . . . . . 1 X 1 0 1 0 - - 0 2 0 -- RESET(Z) COUNTER, MODE -- THE START NUMBER OF PLU, THE LAST NUMBER OF PLU * 0 1 2 . . . . . . 8 1 . . . . . . 2 . 5 0 T 1 * . . . . . 2 1 .
After depressing the PLU key in Z mode, PLU Read and Reset Report will be issued. 2 5 - 1 2 - 1 9 9 7 @ . . . . . . . . . 1 Z 1 -- RESET(Z) COUNTER, MODE * 1 * * 1 * 0 . . 0 . . 1 . . 2 . . . . . . . . . . 2 . . 1 . 2 1 . . 7 . . . . . . . 5 6 . 4 4 8 0 T 1 7 T 1 4 0 0 -- PLU NO., COUNTER -- LINKED DEPARTMENT NO., PRESET PRICE, TAX -- SALES AMOUNT, TAX @ * * 1 . . 1 5 - - - . . . . . . . . 0 . 3 7 . 3 0 . 9 0 . . 0 1 0 4 3 2 7 T L 8 0 2 . . 5 . . . . . . . . -- LINKED DEPARTMENT NO.
SYSTEM BALANCING 7-1. DEPARMENT SALES TOTAL The sum of all department totals: Add all positive departments, subtract all negative department. 7-2. NET TOTAL Net total = The sum of all department totals + Tax total (Add-on tax) + % total + - total 7-3. GROSS TOTAL Gross total = Net total - Return merchandise - VOID Position total - % total - - total 7-4.
SPECIFICATION ·POWER : AC 110V/230V ± 10%, 50/60 ㎐ ·OPERATING TEMPERATURE : 0℃ - 40℃ ·MEMORY PROTECTION ·DISPLAY UNIT : Approx. 60 days battery : 9 digits (front and rear) ·PRINTER UNIT - COLUMN : 13 COLUMNS - PRINTED SPPEED - PAPER ROLL ·INK RIBBON : 3.2 lines/sec : 57.5 ± 0.5 mm, Diameter - 70 ㎜ : PURPLE ·DIMENSION - WITH MIDDLE DRAWER : 400(W) × 450(D) × 281(H) mm - WITH SMALL DRAWER : 325(W) × 420(D) × 225(H) mm ·WEIGHT - WITH MIDDLE DRAWER : 12.7 ㎏ - WITH SMALL DRAWER : 7.
