High Resolution D/N IR Vandal Dome Camera SCV-2080R User Guide Before installing and operating this product, please read this manual thoroughly.
Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and correct input power voltage. In order to that you can understand this manual thoroughly, we will introduce our model description.
Features Contents • Features………………………………………………………………… 5 • Warnings & Cautions…………………………………………………… 6 • Precautions…………………………………………………………… 7 • Components and Accessories………………………………………… 8 • Overview… …………………………………………………………… 9 • Installation……………………………………………………………… 10 ■ Installation… ………………………………………………………………… 10… ■ Adjust the panning, tilting and rotate mechanism while checking the position on the monitor…… 10… ■ Adjusting varifocal lens zoom and focus…………………………………… 12 • Connection……………………………………………………………… 12
Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Precautions Do not install under extreme temperature conditions. Do not install in high humidity environment.
Precautions Overview 1 ⓫ Do not expose the camera to radioactivity. 2 3 Radioactivity exposure may damage the CCD. Notes • Exposure to a spotlight or an object emitting strong light may cause smear or blooming. • Ensure that the power source complies with normal specifications before supplying it to the camera. • In case of IR LED has been lighted, do not lighten directly eye.
Installation Installation Notes • The installation should be done by qualified service personnel or system installers. • If the ceiling material is not strong enough to hold the installation screws, the camera may fall off. Reinforce the ceiling as needed. • Take care not to drop the product during installation. Do not allow anyone to stand below the installation area. 1) R emove the dome cover and shield case from the main body by loosening the three dome cover screws.
Installation Connecting to Power Adjusting varifocal lens zoom and focus 1) Unlock the zoom (focus) handle by turning anti-clockwise. 2) Adjust the zoom (focus) by moving the handle to WIDE (NEAR) or TELE (FAR). 3) After adjustment, tighten the zoom (or the focus) handle, taking care that the adjusted position does not change. The recommended adaptor specification for SCV-2080R is DC 12V/4A. Please check the standard power requirement before connecting the power.
Connection Using Coaxial Communications RS-485 communication control • Coaxial Communications System • OSD Control method Connecting to RS-485 Control Cable WHITE (TRX+) BLACK (TRX-) CONTROL CABLE SPEC WHITE (TRX+) RS-485+ BLCAK (TRX-) RS-485- Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG TECHWIN System Controller or DVR. (1) Connection to a PC.
Operating Your Camera Menu Configuration Menu Setup Use the Function Setup switch whithin the camera. MAIN SETUP MENU LENS ●DC EXPOSURE ●BRIGHTNESS ●SENS-UP ●SHUTTER ●AGC ●RETURN WHITE BAL ●ATW ●MANUAL ●OUTDOOR ●AWC→SET SSDR ●OFF ●ON BACKLIGHT ●OFF ●BLC SSNR3 ●OFF ●ON ●INDOOR Function Setup switch ●HLC 1. Press the Function Setup switch. • Main setup menu is displayed on the monitor screen. Select the function using the Function Setup switch.
Operating Your Camera LENS Using this function, you can control the screen brightness. 1. When the SETUP menu screen is displayed, select‘LENS’by using the Function Setup switch so that the arrow indicates ‘LENS’. 2. DC : You can adjust the minimum shutter and maximum value of ESC shutter mode. MAIN SETUP 1.LENS 2.EXPOSURE DC 3. The Lens mode has sub menu items as listed below. - BRIGHTNESS : Adjusts the video brightness.
Operating Your Camera White Balance (White Bal) SSDR (Samsung Super Dynamic Range) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’ . 2. Select a desired mode using the Function Setup switch. MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.
Operating Your Camera Notes MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.SSNR3 • Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. • When dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT ONLY mode. • The HLC is not activated in day light or when bright light is not present at night in NIGHT ONLY mode.
Operating Your Camera DAY/NIGHT You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function Setup switch so that the arrow indicates ‘DAY/NIGHT’ . - BURST MODE : You can turn on or off the burst signal on B/W mode. - DURATION : You can select brightness of illumination about changing the day/night mode. - DWELL TIME : You can select the duration time about changing the day/night mode.
Operating Your Camera SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.BACKLIGHT OFF 6.SSNR3 ON 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE 2. Select a desired mode using the Function Setup switch. 1. 2. 3. 4. 5. 6. 7. 8. 9.
Operating Your Camera CAM TITLE : If you enter a title, the title will appear on the monitor. 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘CAM TITLE’. 2) Set it to ‘ON’ by using the Function Setup switch. 3) Press the Function Setup switch. 4) Use the Function Setup switch to move to a desired letter and select the letter by pressing the Function Setup switch. Repeat this to enter multiple letters. You can enter up to 15 letters.
Operating Your Camera PRIVACY : Mask an area you want to hide on the screen. 1. 2. 3. 4. 5. 6. 7. 8. 9. PRIVACY AREA SETUP AREA AREA1 MODE OFF MASK COLOR GREEN MASK TONE 1 TOP 39 BOTTOM 79 LEFT 13 RIGHT 52 RETURN 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates ‘PRIVACY’. 2) Set up the mode using the Function Setup switch. - AREA : You can select up to 12 PRIVACY areas.
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. •N othing appears on the screen. ▶ Check that the power cord and line connection between the camera and monitor are fixed properly. ▶ Check that you have properly connected UTP cable or BNC cable to the camera. • The image on the screen is dim. ▶Is lens stained with dirt? Clean your lens with soft, clean cloth.
DECLARATION OF CONFORMITY Dimension Ø 148mm Application of Council Directive(s) 2004 / 108 / EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 126mm European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SCV-2080RP Beginning Serial NO. C5MR6V3Z200001X Year of Manufacture 2010.02.
SALES NETWORK • AMSUNG TECHWIN CO., LTD. S 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si Gyeonggi-do, Korea, 462-703 TEL : +82-31-740-8151~8 FAX : +82-31-740-8145 • AMSUNG TECHWIN AMERICA Inc. S 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com • AMSUNG TECHWIN EUROPE LTD.
