Getting to Know your camera Instructions Q Use this camera in the following order. Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.83) Take a picture. (p.15) Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.
Danger DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Q Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera. internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Q Leaking, overheating, or damaged battery could result in fire or injury. Ɣ Use battery with the correct specification for the camera. Ɣ Do not short circuit, heat or dispose of battery in fire. Ɣ Do not insert the battery with the polarities reversed. Q Remove the battery when not planning to use the camera for a long period of time.
Contents Q Long Time Shutter ................. 32 Q Movie Clip frame stabilizer .... 32 O Using the LCD monitor to adjust the camera settings ........................ 33 Q AF-Auto Focus ...................... 33 Q How to use Voice Memo mode ..................................... 34 Q How to use Voice Recording mode ..................................... 34 Q Sharpness .............................. 35 Q Contrast.................................. 35 Q Mute Recording .....................
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Pictbridge compatible (see p.75) Computer(see p.86) User manual Product Warranty DPOF compatible printer (see p.54) Remote control Camera strap Software CD Rechargeable battery (SLB-1137D) SD Memory Card /MMC (see p.
Identification of features Front & Top Camera Status Lamp Mode dial Power button Speaker Microphone Shutter button Built-in flash Auto focus lamp / Self-timer lamp Remote control sensor Lens / Lens cover 6
Identification of features Back Zoom W Button (Thumbnail) Zoom T Button (Zoom) Touch screen Camera strap eyelet Playmode Button /Print Button OSD Button 7
Identification of features Q Icon Status Description Bottom Icon Battery chamber Battery chamber cover Status Blinking Blinking A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. Blinking - For the first 8 seconds, the lamp blinks at 1 second intervals. - For the final 2 seconds, the lamp blinks quickly at 0.25second intervals. Blinking Pressing the shutter button of remote control will allow an interval of 2 seconds before the image is taken.
Identification of features O PORTRAIT mode Q Mode dial Use this menu to take a picture of a person. Select this mode for quick and easy picture taking with minimal user interaction. O AUTO mode Select this mode for quick and easy picture taking with minimal user interaction. O SCENE mode Use the menu to easily configure optimal settings for a variety of shooting situations. O PROGRAM mode Selecting the program mode will configure the camera with optimal settings.
Identification of features Connecting to a Power Source Q Mode icon MODE Q Number of images and battery life : Using the SLB-1137D AUTO PROGRAM ASR NIGHT Still image MODE PORTRAIT MOVIE TRAVEL Number of images Recording time Approx. 100 MIN Approx. 200 Approx.
Connecting to a Power Source Q You can charge the rechargeable battery (SLB-1137D) by using an SAC-45 KIT. The SAC-45 consists of the AC adapter (SAC-45) and the USB cable (SUC-C2). When the AC adapter and the USB cable are assembled, it can be used as an AC cable. O Using the SAC-45 as an AC charger : Insert the AC adapter into the USB connector. When the AC adapter is inserted, it can be used as an AC charger.
Connecting to a Power Source Instructions on how to use the memory card O Be sure to format the memory card (see p.74) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Q Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -).
Instructions on how to use the memory card O If the memory card is subjected to any of the following, the recorded data may become corrupted : - When the memory card is used incorrectly. - If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading. O Samsung cannot be held responsible for lost data. O It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard disks, CD etc.
When Using the Camera for the First Time: Touch Screen/Setting up the Date/Time and Language O Touch Screen You can select the menus and change the camera’s setting by pressing icons on the touch screen. INFORMATION O You can select any one of 22 languages. These are listed below : - English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Bahasa (Malay / Indonesian), Arabic, Czech, Polish, Hungarian, Turkish.
LCD monitor indicator Q The LCD monitor displays information about the shooting functions and selections. Number of available shots remaining Movie/Voice recording time 00100 p. 70 Card inserted indicator p. 12 Recording mode p. 16~ p. 20 Face recognition/Voice Mute p. 18 /20 Aperture Value/Shutter Speed Self-timer Optical/ Digital Zoom bar/ Digital Zoom rate p. 22~ p. 23 00:00:00 F2.8, 1/30 Voice memo p. 34 Battery p. 12 Image size Frame Rate p. 29 Image quality p. 18 Metering p. 30 p.
Starting the recording mode Q How to use the AUTO mode ( ) Please select this mode for quick and easy picture taking with minimal user interaction. 1. Insert the battery (p.12) taking note of the correct polarity (+ / -). 2. Insert the memory card (p.12). As this camera has a 450MB internal memory, it is not essential to insert the memory card. If the memory card is not inserted, an image will be stored in the internal memory. If the memory card is inserted, an image will be stored on the memory card. 3.
Starting the recording mode Q How to use the ASR (Advanced Shake Reduction) mode( ) Advanced Shake Reduction (ASR) mode. This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions. O Things to watch out for using the ASR mode 1. The digital zoom will not operate in the ASR mode. 2. If the lighting conditions are brighter than fluorescent lighting condition, the ASR doesn’t activate. 3.
Starting the recording mode Q How to use NIGHT mode( Q Face Recognition ) This mode helps to get a well-exposed pictures in the night time and darkness. Select Night mode using mode dial. Q Long Time shutter This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference.
Starting the recording mode INFORMATION O This function can detect up to 9 persons. O When the camera recognises many people at a time, the camera focuses on the nearest person. O When Face recognition begins, Digital Zoom cannot work. O When Face recognition begins, Effect mode cannot work. O When successful, the recognized face will be green and the surrounding will be grey. O Return to previous AF mode if face recognition was failure.
Starting the recording mode Q How to use the MOVIE CLIP mode ( ) A movie clip can be recorded for as long as the available recording time of the memory capacity allows (Max. 2 Hour). 1. Select the MOVIE CLIP mode by rotating the mode dial. (Available recording time will be displayed on the LCD monitor) 2. Point the camera towards the subject and compose the image by using the LCD monitor. Press the Shutter button and movie clips are recorded for as long as the available recording time allows.
Things to Watch Out for When Taking Pictures Q Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. Q In some of the following conditions the auto focus system may not perform as expected. - When photographing a subject that has little contrast. - If the subject is highly reflective or shiny. - If the subject is moving at high speed.
Using the camera buttons to set the camera Q The recording mode function can be set up by using the camera buttons. POWER button O Used for turning the camera’s power on / off. O If there is no operation during the specified time, the camera’s power will be turned off automatically to save battery life. Refer to page 72 for more information about auto power off function. SHUTTER button O Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash.
ZOOM W / T button O WIDE Zoom INFORMATION Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear farther away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting. O Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. O You may notice a decrease in image quality when using the digital zoom.
Setting up the camera mode Self-timer ( Q You can set up the camera mode by pressing the mode icon. In Night scene mode, you can select the shutter speed and aperture value. Main menu Sub menu Available mode Face Recognition Self-timer Macro Flash ) Q This function is used when the photographer would also like to be in the picture.
Remote control O Remote control (option) range When you take a picture by using the remote control, refer to the illustrations shown alongside about the remote control range. Macro( ) Q You can take macro pictures. Select a desired macro icon on the LCD monitor. [Shutter button on the remote control] O Replacing battery for the remote control Make sure the + (positive) polarity is toward the top and the - (negative) polarity is toward the bottom while installing battery for the remote control.
Macro ( ) O Available focusing method, by recording mode (O : Selectable, ũ : Infinity focus range) Auto Macro Macro INFORMATION O When the macro mode is selected, be particularly careful to avoid Normal camera shake. O When you take a picture within 30cm (Wide zoom) or 50cm (Tele zoom) in the Macro mode, select the FLASH OFF mode. Focus Lock Q To focus on a subject not positioned in the centre of the picture, use the focus lock function. O Using the Focus Lock ũ ũ ũ 1.
Flash( ) O How to use the flash INFORMATION 1. Select the recording mode except MOVIE CLIP mode. O If you press the shutter button after selecting the Auto, Fill-in, Slow 2. Select the desired flash mode. 3. Flash mode icon appears on LCD monitor. O O - Select the flash type in accordance with the recording conditions. O Flash range (W : Wide, T : Tele) (Unit : m) Normal Macro Auto Macro O ISO Auto Wide Tele Wide Tele Wide Tele 0.8 ~ 5 0.8 ~ 2.4 0.3 ~ 0.8 0.5 ~ 0.8 0.3 ~ 5 0.5 ~ 2.
Flash( ) O Available focusing method, by recording mode (O : Selectable) O Flash mode indicator Icon Flash mode Description Auto flash If the subject or background is dark, the camera flash will operate automatically. Auto & Red eye reduction If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function. Fill in flash The flash fires regardless of the available light.
Quality/Frame Rate Size Q You can select the image size appropriate for your application. Mode Q You can select the appropriate compression rate for your application. The higher compression rate reduces the resolution of picture.
Metering Q If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. - MULTI : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. - SPOT : Only the rectangular area in the centre of the LCD monitor will be metered for light.
ISO Q You can select the ISO sensitivity when taking pictures. White balance Q The white balance control allows you to adjust the colours to appear more The speed or specific light-sensitivity of a camera is rated in ISO numbers. natural. - AUTO : The camera’s sensitivity is automatically changed by variables such as lighting value or subject brightness. - 80, 100, 200, 400, 800, 1600 : You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity.
Long Time shutter Using the Custom White Balance O White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. O This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference. 1.
Using the LCD monitor to adjust the camera settings O You can use the menu on the LCD monitor to set up recording functions. O The items indicated by Q AF mode will automatically set the best focus point. are default settings. Available mode Sub menu Menu AF-Auto Focus Auto Focus Center AF Multi AF Voice Memo Off On Voice Record - - Soft+ Soft Sharpness Normal Vivid Vivid+ - High Normal Low - Off On Page P. 33 - Center AF- set the focus to the center of screen.
How to use the VOICE MEMO mode Q A voice recording can be recorded with pictures How to use the VOICE RECORDING mode Q A voice can be recorded for as long as the available recording time (Depending on the memory capacity) allows. VOICE MEMO Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (as long as the memory capacity allows) allows. The recording time will be displayed on the LCD monitor.
How to use the VOICE RECORDING mode Contrast Q You can adjust the brightness of the picture you want to take. INFORMATION O A distance of 40cm between you and the camera (microphone) is the Q You can select 3 contrast level-[HIGH], [NORMAL], [LOW]. best distance to record sound. O If the camera power is turned off while the voice recording is paused, the voice recording is cancelled. Sharpness Q You can adjust the sharpness of the picture you want to take.
Effect Q It is possible to add special effects to your images INFORMATION by using this button. O This button will not operate in ASR, Voice recording mode and some Q Still image mode : You can select the Color Effect, Image Adjust and Fun menu. Q Movie clip mode : You can select Off, Color, Custom Color menu. Q Available Effects, by recording mode 36 (O : Selectable) scene modes (Night, Text, Sunset, Dawn, Backligh, Fireworks, Beach&Snow, Self shot, Food, Cafe).
Effect : Color Effect O By using the camera’s digital processor, it is possible to add special effects to your images. Color Custom color Q You can change the R (Red), G (Green) and B (Blue) values of the image. Q You can add a special effect to your picture.(p.36) 1. Press [Color Effect] menu. 2. Select [Color] menu. 3. Select a desired Color effect. icon : Selects R, G, B - WX icon : Changes the values : No effect is added to the image. : Save picture as B/W. : Save picture as sephia color.
Effect : Color Effect Effect: Image Adjust Color Mask Saturation Q With this menu, You can select a part you want to highlight. The rest of the image will be black and white. 1. Press [Menu Effect] menu icon. 1. Press [Menu Effect] menu icon. 2. Select [Image Adjust]. 2. Select [Color Effect] menu. 3. Select [Saturation]. 3. Select [Color Mask]. - Control bar appears after selecting Saturation. - The effect area appears. - You can move the effect area by touching.
Effect : Fun Cartoon Q Press the [EFFECT] menu in an available recording mode. If the image size 6M P (3072X2048), 5M W (3072X1728) are selected, the FUN menu cannot be selected. The size of Cartoon image is fixed to 1M. Select Cartoon ( Select the frame using WX icon ) Pressing the OK icon Press the LCD monitor Ú You can delete the capture image and take an image again. Select a deleted image and press the icon.
Effect : Fun Photo Frame Q You can add any one of 9 types of frame-like borders to a still image you want to capture. Q Date & Time information will not be printed on the stored image taken with Photo Frame menu. O Select the [EFFECT] menu in the available recording mode. (p.36) WX icon : Selecting a frame - Picture frame appears. Press the Shutter button to take a picture.
Effect : Fun O Moving outfocus frame High Light You can move the outfocus frame by touching LCD monitor. 1. Select the outfocus frame by pressing WX icon. 2. Touch the outfocus frame to move. Q You can focus the image by blurring the focus around the image. 3. Press the OK icon. 1. Select the [EFFECT] menu in the available recording mode. (p.36) 2. Select the [FUN] menu. 3. Select the [High Light] menu 4. Select the outfocus frame by pressing WX icon. - Outfocus frame appears on the image 4.
Effect : Fun Composite shooting Ú Selecting 2 composite shots. Q You can combine 2-4 different shots in a still image. Press the shutter button O Select the [EFFECT] menu in the available recording mode. [Ready for taking] [First shot] Press the shutter button Select a desired menu by pressing W X icon and press the OK icon. - : Cancels the composite shooting. : 2 different shots are combined in a still. : 3 different shots are combined in a still. : 4 different shots are combined in a still.
Effect : Fun Q Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. Press the . 2. A previous image will be deleted and new frame will display. If there is an image taken before, press again and a previous image will be deleted again. Press Q Changing a part of composite shot after taking the last shot. 1. After taking the last shot, a cursor to select a frame will display.
World Tour Guide Q You can get the useful travel information for destinations around the world. Q Korean, English and Chinese information is available and the language can be varied in accordance with the sales region. Starting the World Tour Guide. Q Select World Tour Guide mode. Q You can download the tour guide information from the Samsung Camera website.
World Tour Guide Ú Tour Guide Mode icon Return to start Up Tour guide information displays. Select the tour place. Select the tour site. Down Back Multimedia mode Return to the home menu Close Information INFORMATION You can find the detail information and pictures by pressing each icons O Saving the information of some sites may take long time. Save information of each site in order.
Starting play mode Q Turn the camera on and select Play mode by pressing the play mode button ( ). Q If the memory card is inserted in the camera, all the camera functions apply only to the memory card. Q If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. O Touch the button and slide your finger to the left or right to select an image. After selecting an image, press the button marked with an arrow. The images will be played back continuously.
Starting play mode Q On camera movie trimming : You can extract desired frames of movie clip during the movie clip play back. 1. Press the Q Q icon at the point of the movie clip that you want to start extracting. 2. Press the T button. 3. Press the X icon and the extracted range will be displayed on the status bar. 4. Press the Q Q icon once more at the point where you wish the extracted file to stop. 5. Press the T button and a confirmation window will display. 6. Select a desired sub menu.
LCD monitor indicator Q The LCD monitor displays shooting information about the displayed image. 48 No Description 1 Battery Icon Page 2 Folder name & File name 3 Memory card indicator p.12 4 Playback mode p.46 5 Protect p.53 6 Movie Clip / Voice Memo p.46.47 7 Previous / Next image p.46 8 DPOF p.54 p.12 100 - 0060 p.70 9 Menu / Effect 10 ISO AUTO ~ 1600 11 Aperture value F 2.8 ~ F 11.6 p.32 12 Shutter speed 16~1/1.000 p.81 p.57~69 p.31 13 Flash On/Off p.
Thumbnail( )/ Enlargement( ) button Q You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by using STWX icon. 3. Pressing the thumbnail button will zoom back to the original full sized image.
Info ( Printer ( ) button Q Pressing the Info button will display information about the image on the LCD Info ( ) button Q Print button is not available and can’t be connected to printer when you select [COMPUTER] at [USB] menu. You can get [Connecting Computer] message after Pictbridge connection. monitor. Info ( ) button Ú In some instances the camera may not connect to the printer, this will depend on the make of the printer.
Delete ( ) icon Q This deletes images stored on the memory card. 1. Select an image that you want to delete by pressing the W X icon and ) icon. press the DELETE ( Setting up the play back function using the LCD monitor Q PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows.
Starting the slide show Q Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press playing mode button and select [MENU EFFECT] 2. Select [SLIDE SHOW] O MUSIC : Set the slide show music. 1. Select [MUSIC] menu by pressing ST icon 2. Select the music pressing ST icon. O Setting play interval : Set the slide show play interval. 1. Select [Interval] menu by pressing ST icon. 2. Select the interval pressing ST icon.
Voice Memo Q You can add your voice to a stored still image. - Press the shutter button to start recording and voice will be recorded to the still image for 10 seconds. - The recording can be stopped by pressing the shutter button again. Protecting images Q This is used to protect specific shots from being accidentally erased and to unprotect images that have been previously protected. 1. Select desired menu tab by pressing ST icon. 2. Selection window for an image to be protected/ released is displayed.
DPOF Q DPOF (Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. Q The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Q Images can then be printed on DPOF printers, or at an increasing number of photo labs. Q This function is not available for Movie clips and Voice recording files.
DPOF Q Index images (except for movie clips and voice file) are printed as index type. Q Print size : You can specify the print size when printing images stored on the 1. Select [DPOF] menu by pressing ST icon memory The [Size] menu is available only for DPOF 1.1 compatible printers. 2. Select the [Index] menu. 1. Select [DPOF] menu by pressing ST icon 2. Select the [Size] menu. 3. Select a desired sub menu. [One Pic] : Selection window to change the print size of an image is displayed.
Copy To Card Q This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select [COPY TO CARD] menu by pressing ST icon. 2. Select a desired sub menu. - [No] : Cancels “Copy to Card”. - [Yes] : All images, movie clips and voice recording files saved in the internal memory are copied to the memory card after the [Processing!] message is displayed. After copying has been completed, the screen will return to play mode.
Effect : Image Edit INFORMATION Resize O A large sized image can be resized to a smaller sized image, but not Q Change the resolution (size) of pictures taken. vice versa. Select [Start image] to save an image to be the start-up image. The resized image will have a new file name. O Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files can’t be resized. O You can change the resolution of only those files compressed in the 1. Select the [Image Edit] menu. JPEG 4:2:2 format.
Effect : Image Edit Trimming Rotate Q You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Select [Image Edit] menu. 2. Select [ROTATE] menu. 3. Press icon to rotate picture. - icon: rotate picture in a clock-wise direction. - icon: rotate picture in a counterclock-wise direction. 4. Press the [OK] icon. The rotated image will display.
Effect : Color Effect Color Q By using the camera’s digital processor, it is possible to add special effects to your images. 1. Select [Color Effect] menu. 2. Select [Color] menu. 3. Select a desired color effect. Do not use special effect. Save picture as B/W. Save picture as sephia color. Save picture as red. Save picture as green. Save picture as blue. Save picture’s brightness in negative mode. 4. Press [Save] to save picture as applied preset RGB value.
Effect : Image Adjust 1. Select the [EFFECT] menu. 2. Select the [Image Adjust] menu. Add Noise O You can add noise to an image to add a more classic feel to your photo. Brightness O You can change the brightness of image. 1. Select [Brightness] menu. 2. Change the brightness by pressing the W X icon. 1. Select [ ] menu. 2. The noise effect added image will be displayed. Press the [SAVE] icon and the image will be saved as a new file name with displayed [Processing!] message. 3.
Effect : Image Adjust Effect : Fun Red Eye Fix O Red eye effect can be removed from the captured image. 1. Select [Red Eye Fix] menu OK icon 2. The red eye will be removed. Press the SAVE icon and the image will be saved. Select the frame using WX button You can change the location of the text box by pressing the ) icon ( You can change the type and location of the text box by pressing the WX icon. Press the Set icon. You can add the other image.
Effect : Fun O Before saving the cartoon image, you can change the selected image. 1. Press the New Image icon and the selected image is deleted. (A window for selecting the other image will appear.) 2. Select a desired image. Photo Frame Q You can add any one of 9 types of frame-like borders to a still image you want to capture. Q Date & Time information will not be printed on the stored image taken with Photo Frame menu. 3.
Effect : Fun High Light Q You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. Select a desired frame by pressing the W X icon and press the [OK] icon. [Range1] O Picture frame appears. Press shutter button to take a picture. [Range2] [Range3] [Range4] Press the [SAVE] icon and the image is saved as a new file name.
Effect : Fun O Moving and changing the focus frame You can change the focus range after selecting a Range menu. 1. Select a focus range by pressing the WX icon and press the OK button. 2. Select a desired range by pressing the LCD monitor. 3. Press the SAVE icon and the image is saved as a new file name. Composite Q You can combine 2-4 different shots in a still image.
Effect : Fun The second image is selected. Press the Set icon. Ú Selecting 2 composite shots. Pressing the Set icon Pressing the OK button [Changing the position : Pressing the Screen] Ú Touch and move the image up/down/ left/right on the LCD monitor. Pressing the Set icon Press the SAVE icon and the image will be saved. O After selecting the last composite image, you can change a part composite image. 1.
Effect : Fun 2. Press the New Image icon and a window for selecting the other image will appear. Sticker Q You can add any one of 9 types of stickers on your picture. Selecting an image: Press the screen Select [Sticker] ) ( Touch the sticker to select. 3. After pressing the Set icon, press the SAVE icon. The image will be saved as a new file name. Press the LCD monitor and the selected sticker is added. Ú You can add the other stickers (Max. 2 stickers) by pressing the ( ) icon.
Sound Menu Effect : Fun Q In this mode, you can set up sound settings. You can use the setup menu in Pen Tool Q You can add a text or line on the saved image with the Touch Pen. all camera modes, except Voice Recording mode. Q The items indicated by Mode Menu are default settings. Sub Menu Available Mode Page Off Volume Low Medium p. 68 High Make a text or line with the Touch Pen Off Start Sound Sound 1 Sound 2 p. 68 Sound 3 Press the X icon.
Sound [Sound Volume] [Beep sound] Q You can select the sound volume of start. Q If you set sound to ON, various sounds will be sound, operation sound and shutter sound. O [Volume] sub menus : [Off], [Low], [Medium], [High]. activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status. O [Sound] sub menu : [Off], [Sound 1], [Sound 2], [Sound 3] [Start Sound] Q You can select the sound that is activated whenever the camera is turned on.
Setup Menu Q In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. Q The items indicated by Menu tab File Sub Menu Reset Series Language Date&Time Imprint LCD AF Lamp Start Image Sub Menu Page Off 0.5, 1, 3sec p. 72 Power Off 1, 3, 5, 10min - p. 72 Page LCD Save Off On p. 72 p. 70 Calibration - - p. 72 Video Out NTSC PAL p. 73 Format No Yes p. 74 Reset No Yes p. 74 p.
Setup 1 [File] [Language] Q This function allows the user to select the file naming format. Q There is a choice of languages that can be displayed on the LCD monitor. Even if the battery and AC charger are removed and inserted again, the language setting will be preserved. [Reset] : After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card.
Setup 1 [Imprinting the recording date] Q There is an option to include DATE/ TIME on still images. [Off] : The DATE & TIME will not be imprinted on the image file. [Date] : Only the DATE will be imprinted on the image file. [Date&Time] : The DATE & TIME will be imprinted on the image file. The Date & Time are imprinted at the bottom right side of the still image. The imprint function is applied only to still images except photo frame effect mode.
Setup 2 [Quick view] [LCD Save] Q If you enable Quick View before capturing an image, you can view the image Q This function switches LCD monitor off after a set amount time in order to you just captured on the LCD monitor for the duration set in the [Quick View] prevent unnecessary battery drainage. setup. Quick view is possible only with still images. If the camera is not used for about 30 seconds, the power and camera status lamps blink and the LCD monitor turns off.
Setup 2 [Selecting Video out type] INFORMATION The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Using AV cable with camera Connect the camera to an external monitor with the AV cable. Monitor is turned off when the connection is established and images and movie plays on an external monitor.
Setup 2 [Formatting a memory] [Reset] Q This is used for formatting the memory. If you run [Format] on the memory, Q This is used to reset the camera settings. If you select [Reset All], all settings all images, including the protected images, and World Tour Guide file will be deleted. Be sure to download important images to your PC before formatting the memory. O Sub menus [No] : The memory will not be formatted. [Yes] : A [Processing!] message appears and the memory will be formatted.
PictBridge PictBridge : Picture Selection Q You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. O Setting up the camera for connection to the printer 1. Connect the camera and printer with USB cable. 2. Select the [Printer] menu.
PictBridge : Reset PictBridge : Print Setting Q You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Select the [Reset] menu by pressing the ST icon. 2. Select a desired sub menu by pressing the icon. - If [No] is selected : Settings will not be reset. - If [Yes] is selected : All print and image settings will be reset. 1. Press the Menu button and the PictBridge menu will display. 2. Select a desired menu. 3.
Important notes Be sure to observe the following precautions! Q This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. Areas exposed to dust and dirt. Areas exposed to direct sunlight or the inside of a vehicle in hot weather. Environments where there is high magnetism or excessive vibration. Areas with high explosives or highly flammable materials.
Important notes Q Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor.
Warning indicator Low Battery! Ɣ There is low battery capacity. ¬ Insert a fully charged battery. Low Light! Ɣ When taking pictures in dark places ¬ Take pictures in Flash Photography mode. Out of Number! Ɣ When selecting too many printing pages in the PictBridge menu. ¬ Take pictures in Flash Photography mode. DCF Full Error Ɣ Violation of DCF format. ¬ Select printing page within the limitation.
Before contacting a service centre The camera suddenly stops working while in use Ɣ The camera stopped due to a malfunction ¬ Remove /re-insert battery and switch the camera on. The images don’t play back Ɣ Incorrect file name (Violation of DCF format) ¬ Do not change the image file name. The images are unclear Ɣ A picture was taken of the subject without setting an appropriate macro mode ¬ Select an appropriate macro mode to take a clear image.
Specification Q Flash Q Image Sensor - Type : 1/2.5”CCD - Effective Pixel : Approx. 7.2 Mega-pixel - Total Pixel : Approx. 7.4 Mega-pixel Q Lens - Focal Length : NV Lens f = 4.7 ~ 17mm (35mm film equivalent : 28 ~ 101mm) - F No. : F2.8 ~ F5.6 - Digital Zoom : z Still Image mode : 1.0X ~ 5.0X z Play mode : 1.0X ~ 12.0X (depends on image size) Q Q Q LCD Monitor : 3.0” color TFT LCD (7.
Specifications - Movie Clip : z Size : 800x592, 640x480, 320x240 z Frame rate : 30 fps, 15 fps (20 fps for 800x592) z Movie Stabiliser (user selectable) z Movie Editing (Embeded) : Pause during recording, Still Image Capture, Time Trimming Q Storage - Media : z Internal Memory : About 450MB z External memory : MMC plus : Max. 2GB guaranteed SD / SDHC : Max. 4GB guaranteed * Internal memory capacity is subject to change without prior notice. - File Format : z Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.
About the software Software Notes Please ensure that you read this instruction manual carefully before use. · The attached software is a camera driver and image editing software tool for Windows. · Under no circumstances should all or part of either the software or the user manual be reproduced. · Copyrights for software are licensed only for use with a camera. · In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software INFORMATION O Be sure to check the system requirements before installing the driver. O To play back the movie taken with this camera on the computer, DirectX 9.0 or higher version must be installed. O You should allow 5 - 10 seconds for running the automatic setup program according to the capability of your computer. If the frame does not show, run the [Windows Explorer] and select [Installer.exe] in the CD-ROM Drive.
Setting up the application software 3. To play back a movie clip recorded with this camera on the computer, install the XviD codec. 4. Install the Digimax Master in the order shown.
Setting up the application software 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn on the camera power. The [Found New Hardware Wizard] will open and the computer will recognise the camera. Ú If your OS is Windows XP, an image viewer program will open. If the download window of Digimax Master opens after starting Digimax Master, the camera driver was set up successfully.
Starting PC mode Q Disconnecting the camera and PC : Refer to page 88 (Removing the removable disk). 3. Select an image and press the right mouse button. INFORMATION O Before inserting any cables or AC adapter, check the directions and do not insert by force. It may damage the cable or camera. Removable Disk Q Downloading stored images You can download the still images stored on the camera to your PC’s hard disk and print them or use a photo editing software to edit them. 1.
Removable Disk CAUTION O We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection. O When you upload a file that is not taken by this camera to the Removable Disk, the [File Error!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is displayed in THUMBNAIL mode. Removing the removable disk Q Windows 98SE 1. Check whether the camera and PC are transferring a file.
Using USB driver for Mac 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. This camera compatible with MAC OS 10.1 ~ 10.4. 3. Connect the camera to the Macintosh and the camera With USB. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. Removing the USB Driver for Windows 98SE Q To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2.
Digimax Master Q You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. Q To start the program, click Digimax Master from the desktop. O Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. - To download the captured images, select the [Select All] button. - Select desired folder in the window and click the [Select All] button.
Digimax Master O Image viewer : You can view the stored images. O Image edit : You can edit the still image. - Image viewer functions are listed below. Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. Image selection window : You can select the desired images in this window. Multi function selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Digimax Master O Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. Ú Some movie clips that were compressed with a codec that is not compatible with the Digimax Master can’t play back in the Digimax Master. Ú Refer to the [Help] menu in Digimax Master for further information. - Movie clip edit functions are listed below. Edit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie.
FAQ Q Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. ¬ Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. ¬ Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ O When a codec for playing back the movie clip isn’t installed, or isn’t compatible. ¬ Install the codec as listed below. [ Installing codec for Windows ] 1) Insert the CD provided with the camera. 2) Run the Windows Explorer and select [CD-ROM drive:\XviD] folder and click the XviD-1.1.2-01112006.exe. Ú The XviD codec is distributed according to the GNU General Public License and anyone can copy, distribute and change this codec.
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO 96 MEMO