User manual BOSSCOM Bi1 controller installed in a Bang & Olufsen Beo4 remote control. Operate these devices using the modi ed Beo4: Samsung LED TV 7 -series and other. Operate devices that are operate able with RCU’s like: Samsung most remotes for Samsung digital TV.
Congratulations With the BOSSCOM controller installed inside your Bang & Olufsen Beo4 remote control, you can fully operate your non B&O TV with this terminal. This guide explains how. If your Beo4 has already been correctly set up, you can now proceed to one of the two operation tables: Page 9 If your Beo4 has enabled Navi buttons . *1 Page 8 In any other case.
The BOSSCOM controller for the Beo4 remote control The BOSSCOM controller is a small microcomputer module, which is specifically made to be built in to a Bang & Olufsen Beo4 remote control. The controller captures the commands that were meant for operating a Bang & Olufsen device. Before the commands are emitted from the Beo4, these commands are converted, and therefore also able to operate a non Bang & Olufsen TV.
Operating with BOSSCOM . To be able to operate the non B&O TV optimal using the BOSSCOM the user has to be familiar with the operations available when using the original remote control, as described in the TV’s user manual. A beo4 remote control is not equipped with as many keys as most remote controls for non B&O devices. We have designed an operation ‘layout’ that works logically, even common layout BOOSCOM ns to other for ma functions.
Programme stepping, up/ down manoeuvring in menus. Most set top boxes and TV’s has 4 arrow buttons for manoeuvring in or screen menus, up, down, left and right. In addition they are equipped with separate programme stepping buttons for zapping through the programme list. Often these keys are named P+, P -, CH+ or CH -. BOSSCOM often makes use of the and the keys for programme zapping.
Disabling and Dual TV Option The BOSSCOM controller in the modified Beo4 remote control can be enabled or disabled using this option. When disabled the Beo4 remote control operates as a Beo4 that has not been modified. In DUAL TV -mode the BOSSCOM controller enables operation of both a B&O TV and the non B&O TV which the controller is made to operate. Disabling and Dual TV mode: Enter one of these 3 codes within 10 seconds to set the preffered mode. Disables the BOSSCOM controller.
Translation table when NOT in Navigation mode. * see page 10 Text TV operation Daily operation Turns on the TV Turns off the TV Text TV on/ mix Text TV off Enter Prog + Prog Guide Return Exit Source Menu TTV page+ TTV page - Playback operations Play press 1 sec. Stop Pause TTV Hold Rew/ FF Record TTV Index Other operations *1 The up/ down arrow operations can be exchanged with the blue and yellow buttons. See page 6.
Translation table when IN Navigation mode. * see page xxxxxx Text TV operation Daily operation Turns on the TV Turns off the TV Text TV on/ mix Text TV off Enter CH+ / CH REW / FF Playback operations Play Stop Pause Navi buttons are used for manoeuvring in on screen menus.
Beo4 NAVI mode option. Newer Beo4 models are named Beo4 Navi due to an added special navigation button. A joystick type control button, placed where previous Beo4 models have a button.
When the TV mode is selected by pressing the on the TV and turns on the picture. button, it automatically powers But often the sound is lead to external speakers atThis option set the way that the BOSSCOM handles volume in TV mode. This option also can power on other B&O devices than the TV, when is selected. Audio is then typically fed from the TV to the audiomaster from using a Line to Datalink cable. Moving the TV sound proves the sound quality.
The Beo4 VMEM / VTAPE button option On your BOSSCOM modified Beo4 remote control, the VMEM button can be programmed, to open a specific source on your non B&O TV. VMEM/ VTAPE options Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the VMEM or VTAPE button. No new source selected. The AV1 socket on the TV is opened. The AV2 socket on the TV is opened. The DTV tuner on the TV is opened. The Component 1 socket is shifted to.
The Beo4 DTV/ SAT button option On your BOSSCOM modified Beo4 remote control, the DTV/ SAT button can be programmed, to open a specific source on your non B&O TV. DTV/ SAT options Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the DTV/ SAT button. No new source selected. The AV1 socket on the TV is opened. The AV2 socket on the TV is opened. The DTV tuner on the TV is opened. The Component 1 socket is shifted to.
The Beo4 DVD button option On your BOSSCOM modified Beo4 remote control, the DVD button can be programmed, to open a specific source on your non B&O TV. DVD options Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the VMEM or VTAPE button. No new source selected. The AV1 socket on the TV is opened. The AV2 socket on the TV is opened. The DTV tuner on the TV is opened. The Component 1 socket is shifted to. The Component 1 socket is accessed.
The Beo4 VAUX button option On your BOSSCOM modified Beo4 remote control, the VAUX button in the List menu can be programmed, to open a specific source on your non B&O TV. VAUX options Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected with the VMEM or VTAPE button. No new source selected. The AV1 socket on the TV is opened. The AV2 socket on the TV is opened. The DTV tuner on the TV is opened. The Component 1 socket is shifted to.