NB-NH Manual

32
Using "PCoIP"
2
2 Using "PCoIP"
2.4 "PCoIP"
2.4.1 On Screen Display (OSD)
The On Screen Display (OSD) local GUI will appear on the client when the device is powered on and a
PCoIP session is not in progress. The OSD lets the user connect to a host device through the Connect
window.
The Connect window allows access to the Options page which provides some of the functions provided
by the Administrative Web Interface.
To access the Options page, click the Options menu on the Connect window.
2.4.2 Connect Screen
The Connect window will appear during startup except when the client is configured for a managed
startup or auto-reconnect.
You can change the logo that appears above the Connect button by uploading a replacement image
through the Administrative Web Interface Upload menu.
The Network icon at the bottom right of the Connect window shows the status of the network
connection.
A red X over the network icon means either the network is not properly connected or the connection is
still being initialized (i.e., during client boot-up).
Figure 2-1: Network Not Ready (Detail)
Users must wait until the Network Ready icon appears.
Figure 2-2: Network Ready (Detail)
Connect Button
Click the Connect button to start a PCoIP session. When the PCoIP connection is pending, the OSD
local GUI displays a "Connection Pending" message. When the connection is established, the OSD local
GUI will disappear and the session image will appear.