User Manual
English 11
Range Hood Care
Range Hood Care
Range Hood Care
Cleaning
IMPORTANT: Clean the hood and bafe lters frequently according to the
following instructions. Replace the bafe lters before operating the hood.
Exterior Surfaces:
To avoid damage to the exterior surface, do not use steel wool or soap-
lled scouring pads to clean the hood.
Always wipe dry to avoid water marks.
Cleaning Method:
• Liquid detergent soap and water or all-purpose cleanser
• Wipe with a damp soft cloth or nonabrasive sponge, then rinse
with clean water and wipe dry.
• Do not use cleaning agents containing bleach.
Stainless Steel Bafe Filter:
1. Remove the lter by pulling the spring release handle, and
then pulling down the lter.
A
A. Spring release handle
2. Wash the stainless steel bafe lter as needed in your dishwasher
or a hot detergent solution.
3. To reinstall the lter, rst make sure the spring release handles are
toward the front. Insert the stainless steel lter into the
upper track.
4. Push in the spring release handle.
5. Push up on the stainless steel lter, and then release the handle to
latch the lter into place.
WARNING
When removing the lter, please hold it with both hands to make sure it
does not fall.
Replacing an LED Lamp
The LED lights are replaceable by a service technician only. See the
support contact information in the Warranty section.